Are These Precleared Disks Okay to Use?


Recommended Posts

I am still an Unraid noob so please forgive me.  I ran a preclear on two drives that I had laying around and was curious to know if they were okay to use in my array.  Are these drives okay to use?

 

Here is the log files from the first disk:

 

Disk: /dev/sdc
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.17.4-unRAID] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-9YN166
Serial Number:    W1F0AXV6
LU WWN Device Id: 5 000c50 04a37a790
Firmware Version: CC4C
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Apr  3 11:19:32 2015 EDT

==> WARNING: A firmware update for this drive is available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
				was never started.
				Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
				without error or no self-test has ever 
				been run.
Total time to complete Offline 
data collection: 		(  584) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
				Auto Offline data collection on/off support.
				Suspend Offline collection upon new
				command.
				No Offline surface scan supported.
				Self-test supported.
				Conveyance Self-test supported.
				Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
				power-saving mode.
				Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
				General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 349) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       144286696
  3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       158
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   074   060   030    Pre-fail  Always       -       38879367910
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       20987
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       117
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   099   099   099    Old_age   Always   FAILING_NOW 1
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       102
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       0 0 40
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   064   034   045    Old_age   Always   In_the_past 36 (1 87 36 28 0)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       109
193 Load_Cycle_Count        0x0032   088   088   000    Old_age   Always       -       25078
194 Temperature_Celsius     0x0022   036   066   000    Old_age   Always       -       36 (0 16 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       13049h+53m+07.522s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       131001123694319
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       11663575860075

SMART Error Log Version: 1
ATA Error Count: 102 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 102 occurred at disk power-on lifetime: 13776 hours (574 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff 4f 00      03:20:14.934  READ DMA EXT
  00 00 00 00 00 00 00 ff      03:20:03.794  NOP [Abort queued commands]
  25 00 00 ff ff ff 4f 00      03:20:01.602  READ DMA EXT
  00 00 00 00 00 00 00 04      03:20:01.591  NOP [Abort queued commands]
  60 00 00 ff ff ff 4f 00      03:19:50.711  READ FPDMA QUEUED

Error 101 occurred at disk power-on lifetime: 13776 hours (574 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00      03:19:50.711  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      03:19:50.711  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      03:19:50.711  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      03:19:47.590  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      03:19:47.590  READ FPDMA QUEUED

Error 100 occurred at disk power-on lifetime: 13773 hours (573 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff 4f 00      02:27:15.251  READ DMA EXT
  00 00 00 00 00 00 00 ff      02:27:04.105  NOP [Abort queued commands]
  25 00 00 ff ff ff 4f 00      02:27:01.920  READ DMA EXT
  00 00 00 00 00 00 00 04      02:27:01.908  NOP [Abort queued commands]
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED

Error 99 occurred at disk power-on lifetime: 13773 hours (573 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED

Error 98 occurred at disk power-on lifetime: 13770 hours (573 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff 4f 00      02:32:54.411  READ DMA EXT
  00 00 00 00 00 00 00 ff      02:32:43.257  NOP [Abort queued commands]
  25 00 00 ff ff ff 4f 00      02:32:41.057  READ DMA EXT
  00 00 00 00 00 00 00 04      02:32:41.045  NOP [Abort queued commands]
  60 00 00 ff ff ff 4f 00      02:32:30.199  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

========================================================================1.15
== invoked as: ./preclear_disk.sh -r 65536 -w 65536 -b 2000 -A /dev/sdc
== ST3000DM001-9YN166   W1F0AXV6
== Disk /dev/sdc has been successfully precleared
== with a starting sector of 1 
== Ran 1 cycle
==
== Using :Read block size = 65536 Bytes
== Last Cycle's Pre Read Time  : 6:55:09 (120 MB/s)
== Last Cycle's Zeroing time   : 5:28:04 (152 MB/s)
== Last Cycle's Post Read Time : 12:33:27 (66 MB/s)
== Last Cycle's Total Time     : 24:57:40
==
== Total Elapsed Time 24:57:40
==
== Disk Start Temperature: 36C
==
== Current Disk Temperature: 37C, 
==
============================================================================
** Changed attributes in files: /tmp/smart_start_sdc  /tmp/smart_finish_sdc
                ATTRIBUTE   NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS      RAW_VALUE
      Raw_Read_Error_Rate =   119     117            6        ok          224804176
         Spin_Retry_Count =   100     100           97        near_thresh 0
         End-to-End_Error =    99      99           99        FAILING_NOW 1
       Reported_Uncorrect =     1       1            0        near_thresh 102
  Airflow_Temperature_Cel =    63      64           45        In_the_past 37
      Temperature_Celsius =    37      36            0        ok          37

*** Failing SMART Attributes in /tmp/smart_finish_sdc *** 
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
184 End-to-End_Error        0x0032   099   099   099    Old_age   Always   FAILING_NOW 1

0 sectors were pending re-allocation before the start of the preclear.
0 sectors were pending re-allocation after pre-read in cycle 1 of 1.
0 sectors were pending re-allocation after zero of disk in cycle 1 of 1.
0 sectors are pending re-allocation at the end of the preclear,
    the number of sectors pending re-allocation did not change.
0 sectors had been re-allocated before the start of the preclear.
0 sectors are re-allocated at the end of the preclear,
    the number of sectors re-allocated did not change. 
============================================================================

 

 

Link to comment

Disk: /dev/sdc
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.17.4-unRAID] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-9YN166
Serial Number:    W1F0AXV6
LU WWN Device Id: 5 000c50 04a37a790
Firmware Version: CC4C
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Apr  4 12:17:13 2015 EDT

==> WARNING: A firmware update for this drive is available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
				was never started.
				Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
				without error or no self-test has ever 
				been run.
Total time to complete Offline 
data collection: 		(  584) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
				Auto Offline data collection on/off support.
				Suspend Offline collection upon new
				command.
				No Offline surface scan supported.
				Self-test supported.
				Conveyance Self-test supported.
				Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
				power-saving mode.
				Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
				General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 349) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   119   099   006    Pre-fail  Always       -       224804176
  3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       158
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   074   060   030    Pre-fail  Always       -       38879610414
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       21012
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       117
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   099   099   099    Old_age   Always   FAILING_NOW 1
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       102
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       0 0 40
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   063   034   045    Old_age   Always   In_the_past 37 (1 87 44 28 0)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       109
193 Load_Cycle_Count        0x0032   088   088   000    Old_age   Always       -       25078
194 Temperature_Celsius     0x0022   037   066   000    Old_age   Always       -       37 (0 16 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       13074h+51m+00.125s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       131367742699489
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       13175836137598

SMART Error Log Version: 1
ATA Error Count: 102 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 102 occurred at disk power-on lifetime: 13776 hours (574 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff 4f 00      03:20:14.934  READ DMA EXT
  00 00 00 00 00 00 00 ff      03:20:03.794  NOP [Abort queued commands]
  25 00 00 ff ff ff 4f 00      03:20:01.602  READ DMA EXT
  00 00 00 00 00 00 00 04      03:20:01.591  NOP [Abort queued commands]
  60 00 00 ff ff ff 4f 00      03:19:50.711  READ FPDMA QUEUED

Error 101 occurred at disk power-on lifetime: 13776 hours (574 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00      03:19:50.711  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      03:19:50.711  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      03:19:50.711  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      03:19:47.590  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      03:19:47.590  READ FPDMA QUEUED

Error 100 occurred at disk power-on lifetime: 13773 hours (573 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff 4f 00      02:27:15.251  READ DMA EXT
  00 00 00 00 00 00 00 ff      02:27:04.105  NOP [Abort queued commands]
  25 00 00 ff ff ff 4f 00      02:27:01.920  READ DMA EXT
  00 00 00 00 00 00 00 04      02:27:01.908  NOP [Abort queued commands]
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED

Error 99 occurred at disk power-on lifetime: 13773 hours (573 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00      02:26:50.971  READ FPDMA QUEUED

Error 98 occurred at disk power-on lifetime: 13770 hours (573 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff 4f 00      02:32:54.411  READ DMA EXT
  00 00 00 00 00 00 00 ff      02:32:43.257  NOP [Abort queued commands]
  25 00 00 ff ff ff 4f 00      02:32:41.057  READ DMA EXT
  00 00 00 00 00 00 00 04      02:32:41.045  NOP [Abort queued commands]
  60 00 00 ff ff ff 4f 00      02:32:30.199  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

Link to comment

Here are my logs from the other disk:

 

Disk: /dev/sdk
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.17.4-unRAID] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-9YN166
Serial Number:    S1F06DXL
LU WWN Device Id: 5 000c50 04a38c0b7
Firmware Version: CC4C
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Apr  3 11:16:34 2015 EDT

==> WARNING: A firmware update for this drive is available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
				was never started.
				Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
				without error or no self-test has ever 
				been run.
Total time to complete Offline 
data collection: 		(  575) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
				Auto Offline data collection on/off support.
				Suspend Offline collection upon new
				command.
				No Offline surface scan supported.
				Self-test supported.
				Conveyance Self-test supported.
				Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
				power-saving mode.
				Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
				General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 341) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   082   006    Pre-fail  Always       -       145369120
  3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       216
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       896
  7 Seek_Error_Rate         0x000f   070   060   030    Pre-fail  Always       -       11969193
  9 Power_On_Hours          0x0032   072   072   000    Old_age   Always       -       24933
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       93
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       923
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       2 2 2
189 High_Fly_Writes         0x003a   092   092   000    Old_age   Always       -       8
190 Airflow_Temperature_Cel 0x0022   067   034   045    Old_age   Always   In_the_past 33 (1 22 40 23 0)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       88
193 Load_Cycle_Count        0x0032   084   084   000    Old_age   Always       -       32890
194 Temperature_Celsius     0x0022   033   066   000    Old_age   Always       -       33 (0 15 0 0 0)
197 Current_Pending_Sector  0x0012   100   058   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   058   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       12585h+40m+08.035s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       50269617233804
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       49362153686802

SMART Error Log Version: 1
ATA Error Count: 778 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 778 occurred at disk power-on lifetime: 24905 hours (1037 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   4d+09:07:51.252  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:51.251  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:51.142  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:51.133  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00   4d+09:07:51.090  CHECK POWER MODE

Error 777 occurred at disk power-on lifetime: 24905 hours (1037 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   4d+09:07:45.078  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:44.380  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:44.242  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:44.043  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:44.042  READ FPDMA QUEUED

Error 776 occurred at disk power-on lifetime: 24905 hours (1037 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   4d+09:06:25.482  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:25.318  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:25.024  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:24.950  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:24.784  READ FPDMA QUEUED

Error 775 occurred at disk power-on lifetime: 24905 hours (1037 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   4d+09:06:09.616  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:05.354  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:03.818  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:03.807  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00   4d+09:06:03.806  CHECK POWER MODE

Error 774 occurred at disk power-on lifetime: 24905 hours (1037 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   4d+09:05:45.802  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:05:45.791  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00   4d+09:05:45.791  CHECK POWER MODE
  60 00 00 ff ff ff 4f 00   4d+09:05:45.783  READ FPDMA QUEUED
  b0 da 00 00 4f c2 00 00   4d+09:05:45.770  SMART RETURN STATUS

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

========================================================================1.15
== invoked as: ./preclear_disk.sh -r 65536 -w 65536 -b 2000 -A /dev/sdk
== ST3000DM001-9YN166   S1F06DXL
== Disk /dev/sdk has been successfully precleared
== with a starting sector of 1 
== Ran 1 cycle
==
== Using :Read block size = 65536 Bytes
== Last Cycle's Pre Read Time  : 6:46:48 (122 MB/s)
== Last Cycle's Zeroing time   : 5:19:24 (156 MB/s)
== Last Cycle's Post Read Time : 12:18:08 (67 MB/s)
== Last Cycle's Total Time     : 24:25:20
==
== Total Elapsed Time 24:25:20
==
== Disk Start Temperature: 33C
==
== Current Disk Temperature: 36C, 
==
============================================================================
** Changed attributes in files: /tmp/smart_start_sdk  /tmp/smart_finish_sdk
                ATTRIBUTE   NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS      RAW_VALUE
      Raw_Read_Error_Rate =   119     117            6        ok          209617240
         Spin_Retry_Count =   100     100           97        near_thresh 0
         End-to-End_Error =   100     100           99        near_thresh 0
       Reported_Uncorrect =     1       1            0        near_thresh 923
  Airflow_Temperature_Cel =    64      67           45        In_the_past 36
      Temperature_Celsius =    36      33            0        ok          36
No SMART attributes are FAILING_NOW

0 sectors were pending re-allocation before the start of the preclear.
0 sectors were pending re-allocation after pre-read in cycle 1 of 1.
0 sectors were pending re-allocation after zero of disk in cycle 1 of 1.
0 sectors are pending re-allocation at the end of the preclear,
    the number of sectors pending re-allocation did not change.
896 sectors had been re-allocated before the start of the preclear.
936 sectors are re-allocated at the end of the preclear,
    a change of 40 in the number of sectors re-allocated. 
============================================================================

 

 

Link to comment

Disk: /dev/sdk
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.17.4-unRAID] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-9YN166
Serial Number:    S1F06DXL
LU WWN Device Id: 5 000c50 04a38c0b7
Firmware Version: CC4C
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Apr  4 11:41:54 2015 EDT

==> WARNING: A firmware update for this drive is available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
				was never started.
				Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
				without error or no self-test has ever 
				been run.
Total time to complete Offline 
data collection: 		(  575) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
				Auto Offline data collection on/off support.
				Suspend Offline collection upon new
				command.
				No Offline surface scan supported.
				Self-test supported.
				Conveyance Self-test supported.
				Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
				power-saving mode.
				Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
				General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 341) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   119   082   006    Pre-fail  Always       -       209617240
  3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       216
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       936
  7 Seek_Error_Rate         0x000f   070   060   030    Pre-fail  Always       -       12207268
  9 Power_On_Hours          0x0032   072   072   000    Old_age   Always       -       24957
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       93
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       923
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       2 2 2
189 High_Fly_Writes         0x003a   092   092   000    Old_age   Always       -       8
190 Airflow_Temperature_Cel 0x0022   064   034   045    Old_age   Always   In_the_past 36 (1 22 42 23 0)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       88
193 Load_Cycle_Count        0x0032   084   084   000    Old_age   Always       -       32890
194 Temperature_Celsius     0x0022   036   066   000    Old_age   Always       -       36 (0 15 0 0 0)
197 Current_Pending_Sector  0x0012   100   058   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   058   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       12610h+05m+43.191s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       50906821544257
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       50071252329690

SMART Error Log Version: 1
ATA Error Count: 778 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 778 occurred at disk power-on lifetime: 24905 hours (1037 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   4d+09:07:51.252  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:51.251  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:51.142  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:51.133  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00   4d+09:07:51.090  CHECK POWER MODE

Error 777 occurred at disk power-on lifetime: 24905 hours (1037 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   4d+09:07:45.078  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:44.380  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:44.242  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:44.043  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:07:44.042  READ FPDMA QUEUED

Error 776 occurred at disk power-on lifetime: 24905 hours (1037 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   4d+09:06:25.482  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:25.318  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:25.024  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:24.950  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:24.784  READ FPDMA QUEUED

Error 775 occurred at disk power-on lifetime: 24905 hours (1037 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   4d+09:06:09.616  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:05.354  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:03.818  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:06:03.807  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00   4d+09:06:03.806  CHECK POWER MODE

Error 774 occurred at disk power-on lifetime: 24905 hours (1037 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   4d+09:05:45.802  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   4d+09:05:45.791  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00   4d+09:05:45.791  CHECK POWER MODE
  60 00 00 ff ff ff 4f 00   4d+09:05:45.783  READ FPDMA QUEUED
  b0 da 00 00 4f c2 00 00   4d+09:05:45.770  SMART RETURN STATUS

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

Thanks in advance!

Link to comment

W1F0AXV6 - RMA / throw out now.  It has an end-to-end error, for which a single failure is enough to throw the drive into failing now status.

 

S1F06DXL - 896 reallocated sectors prior to preclear, 936 after preclear.  The platters are starting to degrade.  I would never trust a drive with that many reallocated sectors, even if the value didn't change.  (But that's your own judgement.  Most drives have a few thousand spare sectors)

Link to comment

W1F0AXV6 - RMA / throw out now.  It has an end-to-end error, for which a single failure is enough to throw the drive into failing now status.

 

S1F06DXL - 896 reallocated sectors prior to preclear, 936 after preclear.  The platters are starting to degrade.  I would never trust a drive with that many reallocated sectors, even if the value didn't change.  (But that's your own judgement.  Most drives have a few thousand spare sectors)

 

Thank you!

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.