January 5, 201610 yr Hi, I upgraded my 6.0.1 system to 6.1.6 using the web gui and then after a bit, the web gui went down. I get 'webpage not available' when I try to hit the web gui, which is on a static IP on my network. I can telnet into my unraid and I also see it in my network devices (I'm on Win 7 64). I've tried reverting back to my previous version, but I still can't get into the gui. One more thing I tried was deleting the plugins, and then rebooting, but still no luck. Attached is my syslog that I pulled from typing 'diagnostics' in a telnet putty command prompt. Any help is appreciated! syslog.zip
January 5, 201610 yr Author searched forums / wiki a bit more and found the below, which I ran in another telnet session and that fixed the issues. Not sure why it was "stuck" in the first place. nohup /usr/local/sbin/emhttp &
January 5, 201610 yr Community Expert searched forums / wiki a bit more and found the below, which I ran in another telnet session and that fixed the issues. Not sure why it was "stuck" in the first place. nohup /usr/local/sbin/emhttp & That should not have worked as the emhttp process is not restartable! The fact it worked suggests it was never started in the first place. Normally the emhttp process is started via the 'go' file in the config folder on the flash drive. It might be worth checking to see if that is there? Form a telnet/ssj session it can be found as /boot/config/go. Over the network if will be under config/go on the 'flash ' share.
Archived
This topic is now archived and is closed to further replies.