pixelgraft Posted January 5, 2016 Share Posted January 5, 2016 Hi, I upgraded my 6.0.1 system to 6.1.6 using the web gui and then after a bit, the web gui went down. I get 'webpage not available' when I try to hit the web gui, which is on a static IP on my network. I can telnet into my unraid and I also see it in my network devices (I'm on Win 7 64). I've tried reverting back to my previous version, but I still can't get into the gui. One more thing I tried was deleting the plugins, and then rebooting, but still no luck. Attached is my syslog that I pulled from typing 'diagnostics' in a telnet putty command prompt. Any help is appreciated! syslog.zip Quote Link to comment
pixelgraft Posted January 5, 2016 Author Share Posted January 5, 2016 searched forums / wiki a bit more and found the below, which I ran in another telnet session and that fixed the issues. Not sure why it was "stuck" in the first place. nohup /usr/local/sbin/emhttp & Quote Link to comment
itimpi Posted January 5, 2016 Share Posted January 5, 2016 searched forums / wiki a bit more and found the below, which I ran in another telnet session and that fixed the issues. Not sure why it was "stuck" in the first place. nohup /usr/local/sbin/emhttp & That should not have worked as the emhttp process is not restartable! The fact it worked suggests it was never started in the first place. Normally the emhttp process is started via the 'go' file in the config folder on the flash drive. It might be worth checking to see if that is there? Form a telnet/ssj session it can be found as /boot/config/go. Over the network if will be under config/go on the 'flash ' share. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.