NjGRu4R4ZrY9 Posted January 8, 2016 Share Posted January 8, 2016 So i have played around with unRAID a bit.... I am hoping to put one into productions. I was wondering if it would be possible to use acd_cli https://github.com/yadayada/acd_cli with unraid? Quote Link to comment
sennico Posted January 25, 2016 Share Posted January 25, 2016 I would definitely be interested in using this with unraid as well. Quote Link to comment
nokdim Posted September 1, 2016 Share Posted September 1, 2016 I have this running. Unraid 6.1.9 with a local share for photos I have docker sedlund/acdcli which uses yadayada acd_cli I also use acdmount as described on the docker page for sedlund/acdcli I can run a command from the unraid host to kick off a backup job which will copy files from the unraid NAS to the cloud direct. I copied off about 100Gig so far of pictures for an initial sync. Quote Link to comment
Wob76 Posted September 30, 2016 Share Posted September 30, 2016 I didn't have much joy playing with acd_cli in a docker, I wanted to use the mount option, and a limitation with docker and exporting fuse mounts meant that the data was only available inside the docker. I have installed acd_cli on UNRAID, at it is working fine, I am still testing reliability, so still early days. You will need to have Python3.5 installed, there is a problem with the one in the NerdPack plugin, sqlite3 is not working in it, dmacias is looking to solve that, but you can manually install it with. upgradepkg --install-new http://slackonly.com/pub/packages/14.1-x86_64/python/python3/python3-3.5.1-x86_64-1_slack.txz After that is installed you can install acd_cli with. pip3 install --upgrade git+https://github.com/yadayada/acd_cli.git you may need to also install the following dependencies, i can't remember if they auto installed. pip3 install SQLAlchemy pip3 install dateutils I also installed the encfs for an encryption layer, you can try that my running upgradepkg --install-new of the following packages; http://download.salixos.org/x86_64/14.2/salix/ap/encfs-1.8.1-x86_64-1gv.txz http://slackware.cs.utah.edu/pub/slackware/slackware64-14.2/slackware64/l/boost-1.59.0-x86_64-1.txz http://ftp.slackware.org.uk/salix/x86_64/14.1/salix/l/rlog-1.4-x86_64-1pw.txz http://ftp.slackware.org.uk/slackware/slackware64-14.1/slackware64/a/slocate-3.1-x86_64-4.txz None of this will survive a reboot, and you need to do all the mounting and configuration after installing the above, If it proves reliable I might try and tackle a plugin later, but thought I would post this now if anyone wants to have a play. Wob Quote Link to comment
publicENEMY Posted October 10, 2016 Share Posted October 10, 2016 upgradepkg --install-new http://slackonly.com/pub/packages/14.1-x86_64/python/python3/python3-3.5.1-x86_64-1_slack.txz Tried that but get these error. Cannot install https://packages.slackonly.com/pub/packages/14.1-x86_64/python/python3/python3-3.5.1-x86_64-1_slack.txz: file not found Tried with upgradepkg --install-new https://packages.slackonly.com/pub/packages/14.1-x86_64/python/python3/python3-3.5.1-x86_64-1_slack.txz same error. Check the file if it exist, and it exist. Im on unraid 5. How do I fix this? Edit: I just noticed this is on Unraid 6. Before I go through the hassle of upgrading a perfectly working setup, I would like to ask, Does acd_cli and encfs works on Unraid 6? Does it works outside Docker image? Quote Link to comment
RobJ Posted October 10, 2016 Share Posted October 10, 2016 upgradepkg --install-new http://slackonly.com/pub/packages/14.1-x86_64/python/python3/python3-3.5.1-x86_64-1_slack.txz Tried that but get these error. Cannot install https://packages.slackonly.com/pub/packages/14.1-x86_64/python/python3/python3-3.5.1-x86_64-1_slack.txz: file not found Tried with upgradepkg --install-new https://packages.slackonly.com/pub/packages/14.1-x86_64/python/python3/python3-3.5.1-x86_64-1_slack.txz same error. Check the file if it exist, and it exist. Im on unraid 5. How do I fix this? Upgrade to UnRAID v6 ? You are trying to use a 64 bit package from Slackware 14.1, but if you are still on unRAID v5, you need a 32 bit package from Slackware 13.* . Quote Link to comment
Wob76 Posted October 11, 2016 Share Posted October 11, 2016 Before I go through the hassle of upgrading a perfectly working setup, I would like to ask, Does acd_cli and encfs works on Unraid 6? Does it works outside Docker image? Yes, i have it working on Unraid 6.2.1 outside of docker. I have posted my current working script in this thread (https://lime-technology.com/forum/index.php?topic=50516.0) I have it loading via the /boot/config/go. I have only had it working for a couple of weeks, so reliability is not yet really tested and there are some limitation (read the above thread). It would be nice if this was all in a plugin, but that is a little beyond my skill set, so the script will do me for now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.