[Plugin] unbalanced


Recommended Posts

Sorry mate - here is the correct one  ;)

 

From the logs, I can see that unbalance copied folders to disk4, disk10 and disk11, at least.

 

I don't understand why you say that it only copies to one disk.

 

But the main issue is that the rsync operations are being stopped due to errors 13 and 23.

 

That's why it doesn't complete the move.

 

In the next release, I will make rsync flags customizable, so that, for example, it can be run without copying extended attributes, as mentioned a couple posts above by redbeard.

Link to comment

Does this program follow share rules? AKA if My movie share has a split of "0" will it ensure that all folder structures get put on the same drives? Is there a way to stop it from transferring?

 

I've been transferring 100TB of data for weeks now, slowly converting to XFS at roughly ~60-90MB/s (limited by my local network). I get about 120+ MB/s by bypassing my network with this plugin, and no longer have to leave my desktop computer on during transfers. Been looking for this plugin for ages, wish I knew it existed sooner.

Link to comment

I just wanted to say thank you to jbrodriguez for this great plug-in. I just completed the migration of almost 160 TB's of data across my 2 UNRAID servers while completing the upgrade to the XFS file system.  Over 2 months of data movement and it all went along without a snag. Thanks again!

Link to comment

I just wanted to say thank you to jbrodriguez for this great plug-in. I just completed the migration of almost 160 TB's of data across my 2 UNRAID servers while completing the upgrade to the XFS file system.  Over 2 months of data movement and it all went along without a snag. Thanks again!

 

Agreed, I also run 2 servers that are pretty dang close to yours.

 

I have a bunch of 3/4TB reds too, and just made the switch to Seagate Archive drives. Haven't got them yet, still a bit worried about overall performance of them.

Link to comment

I just wanted to say thank you to jbrodriguez for this great plug-in. I just completed the migration of almost 160 TB's of data across my 2 UNRAID servers while completing the upgrade to the XFS file system.  Over 2 months of data movement and it all went along without a snag. Thanks again!

 

Agreed, I also run 2 servers that are pretty dang close to yours.

 

I have a bunch of 3/4TB reds too, and just made the switch to Seagate Archive drives. Haven't got them yet, still a bit worried about overall performance of them.

 

No issues here with the 8TB Archive drives. Half of them have been in service for 6 months.  They perform just as well as the Red's (with writes being just a tad slower).  I use my servers for media storage so the slower write speeds are not an issue.  I do wonder about longevity, but only time will tell.  I figure, by the time these guys start degrading, I will have upgraded to bigger/faster drives. In fact, I am looking forward to getting my hands on a Seagate ST8000VN0002 once they drop down to a more reasonable price.

Link to comment

I actually have an issue now. The plugin is refusing to calculate, it just sits there forever processing. Tried restarting the entire server 2 times to make sure it wasn't some hanged process.

 

EDIT: Restart the plugin a bunch of time, checking same boxes from disk 4 to disk 14, pressing calculate, etc. Then it randomly worked on the ~5th try of doing the exact same process. *shrug*

Link to comment

I just wanted to say thank you to jbrodriguez for this great plug-in. I just completed the migration of almost 160 TB's of data across my 2 UNRAID servers while completing the upgrade to the XFS file system.  Over 2 months of data movement and it all went along without a snag. Thanks again!

 

Thank you for the comments Drift King !

 

That's a lot of data movement :)

Link to comment

Does this program follow share rules? AKA if My movie share has a split of "0" will it ensure that all folder structures get put on the same drives? Is there a way to stop it from transferring?

 

I've been transferring 100TB of data for weeks now, slowly converting to XFS at roughly ~60-90MB/s (limited by my local network). I get about 120+ MB/s by bypassing my network with this plugin, and no longer have to leave my desktop computer on during transfers. Been looking for this plugin for ages, wish I knew it existed sooner.

 

Thanks for the comments tyrindor !

 

It doesn't follow share rules, since it writes directly to disks ("/mnt/disk1/films") rather than shares ("/mnt/user/films").

It's not possible to stop it right now, other than killing it from the command line (kill unbalance and rsync processes).

Including an option to stop it wouldn't be that difficult, but it wouldn't be _too_ different than killing it.

Link to comment

Had to go back to transferring over the network. :(

 

The above problem where it just sits there forever "calculating" came back and it just wouldn't stop. Restarted the server 3 times, restarted the plugin even more times, no idea why it happens or how it fixes itself. No one else has this happen?

 

Here's the last part of my log, everything after the last successful transfer.

log.zip

Link to comment

Had to go back to transferring over the network. :(

 

The above problem where it just sits there forever "calculating" came back and it just wouldn't stop. Restarted the server 3 times, restarted the plugin even more times, no idea why it happens or how it fixes itself. No one else has this happen?

 

Here's the last part of my log, everything after the last successful transfer.

 

Sorry to hear that tyrindor.

 

I'll take a look at your log and check for anything unusual.

 

EDIT: Took a look, but I don't see any invocation of the Calculate command. Unless you have trimmed the log, there should be a line similar to this

 

I: 2016/02/27 12:02:49 core.go:299: Running calculate operation ...

I: 2016/02/27 12:02:49 core.go:332: calculateBestFit:Begin:srcDisk(/mnt/disk19); dstDisks(18)

 

 

Link to comment

Had to go back to transferring over the network. :(

 

The above problem where it just sits there forever "calculating" came back and it just wouldn't stop. Restarted the server 3 times, restarted the plugin even more times, no idea why it happens or how it fixes itself. No one else has this happen?

 

Here's the last part of my log, everything after the last successful transfer.

 

Sorry to hear that tyrindor.

 

I'll take a look at your log and check for anything unusual.

 

EDIT: Took a look, but I don't see any invocation of the Calculate command. Unless you have trimmed the log, there should be a line similar to this

 

I: 2016/02/27 12:02:49 core.go:299: Running calculate operation ...

I: 2016/02/27 12:02:49 core.go:332: calculateBestFit:Begin:srcDisk(/mnt/disk19); dstDisks(18)

 

Wonder if the plugin isn't receiving the command when I click the button?

 

I deleted the log, restarted the plugin again, and it started working again. I have no idea why that would fix it, may be unrelated. Though, the last time I had this happen I did the same thing and I'm pretty sure it fixed it then too. Really strange, wonder if it's caused by the log getting too big.

Link to comment

Doing it again. :(

 

Stopped plugin, deleted log, started plugin, added share, then clicked calculate. It's sitting there doing the calculating animation, the cmdline box doesn't pop up at all. The plugin does not acknowledge I hit the calculate button according to the log. I can't seem to fix it again, even after a complete server restart. The only way to fix it seems to wait a random amount of time.

 

What I am doing is checking 1 "from" disk, and unchecking all but 1 "to" disk. Not sure if this is the cause, because the plugin insists on rechecking all the "to" disks whenever I change the "from" disk. When it starts working again, i'll leave all the "to" disks checked and see if it still happens.

 

I: 2016/04/28 08:23:17 unbalance.go:28: unBALANCE v1.4.0-513.d128a6b starting up ...
I: 2016/04/28 08:23:17 unbalance.go:38: Using config file /boot/config/plugins/unbalance/unbalance.conf ...
I: 2016/04/28 08:23:17 server.go:45: Starting service Server ...
I: 2016/04/28 08:23:17 server.go:62: Serving files from /usr/local/emhttp/plugins/unbalance
I: 2016/04/28 08:23:17 server.go:93: Server started listening on :6237
I: 2016/04/28 08:23:17 core.go:75: starting service Core ...
I: 2016/04/28 08:23:17 unbalance.go:48: Press Ctrl+C to stop ...
I: 2016/04/28 08:23:19 core.go:131: Sending config
I: 2016/04/28 08:23:19 unraid.go:373: Unraid Box Condition: &{NumDisks:23 NumProtected:24 Synced:1969-12-31 18:00:00 -0600 CST SyncErrs:0 Resync:0 ResyncPos:0 State:STARTED Size:93006521708544 Free:45696479588352 NewFree:45696479588352}
I: 2016/04/28 08:23:19 unraid.go:374: Unraid Box SourceDiskName: 
I: 2016/04/28 08:23:19 unraid.go:375: Unraid Box BytesToMove: 0
I: 2016/04/28 08:23:19 unraid.go:386: Id(1); Name(disk1); Path(/mnt/disk1); Device(sdw); Type(Data); FsType(reiserfs); Free(706.9G); NewFree(706.9G); Size(2.7T); Serial(WDC_WD30EZRS-00J99B0_WD-WCAWZ0794407); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(2); Name(disk2); Path(/mnt/disk2); Device(sdx); Type(Data); FsType(reiserfs); Free(698.4G); NewFree(698.4G); Size(2.7T); Serial(WDC_WD30EZRS-00J99B0_WD-WCAWZ0787306); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(3); Name(disk3); Path(/mnt/disk3); Device(sdc); Type(Data); FsType(reiserfs); Free(575.9G); NewFree(575.9G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ1441285); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(4); Name(disk4); Path(/mnt/disk4); Device(sdd); Type(Data); FsType(reiserfs); Free(302.3G); NewFree(302.3G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ1112721); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(5); Name(disk5); Path(/mnt/disk5); Device(sde); Type(Data); FsType(reiserfs); Free(780.4G); NewFree(780.4G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ1112024); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(6); Name(disk6); Path(/mnt/disk6); Device(sdz); Type(Data); FsType(reiserfs); Free(432.7G); NewFree(432.7G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ1280638); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(7); Name(disk7); Path(/mnt/disk7); Device(sdy); Type(Data); FsType(reiserfs); Free(375.3G); NewFree(375.3G); Size(2.7T); Serial(WDC_WD30EZRS-00J99B0_WD-WCAWZ0621891); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(; Name(disk8); Path(/mnt/disk8); Device(sdq); Type(Data); FsType(reiserfs); Free(385.6G); NewFree(385.6G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ1537981); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(9); Name(disk9); Path(/mnt/disk9); Device(sdp); Type(Data); FsType(reiserfs); Free(413.2G); NewFree(413.2G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ2396436); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(10); Name(disk10); Path(/mnt/disk10); Device(sdk); Type(Data); FsType(reiserfs); Free(474.1G); NewFree(474.1G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ1234582); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(11); Name(disk11); Path(/mnt/disk11); Device(sdl); Type(Data); FsType(reiserfs); Free(317.7G); NewFree(317.7G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ2361646); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(12); Name(disk12); Path(/mnt/disk12); Device(sdm); Type(Data); FsType(reiserfs); Free(547.1G); NewFree(547.1G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ2367485); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(13); Name(disk13); Path(/mnt/disk13); Device(sdn); Type(Data); FsType(reiserfs); Free(596G); NewFree(596G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ2377366); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(14); Name(disk14); Path(/mnt/disk14); Device(sdo); Type(Data); FsType(reiserfs); Free(497.5G); NewFree(497.5G); Size(2.7T); Serial(WDC_WD30EZRX-00MMMB0_WD-WCAWZ2204686); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(15); Name(disk15); Path(/mnt/disk15); Device(sds); Type(Data); FsType(reiserfs); Free(985.1G); NewFree(985.1G); Size(3.6T); Serial(WDC_WD40EFRX-68WT0N0_WD-WCC4E0323564); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(16); Name(disk16); Path(/mnt/disk16); Device(sdt); Type(Data); FsType(reiserfs); Free(955.3G); NewFree(955.3G); Size(3.6T); Serial(WDC_WD40EFRX-68WT0N0_WD-WCC4E0320243); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(17); Name(disk17); Path(/mnt/disk17); Device(sdu); Type(Data); FsType(reiserfs); Free(892.3G); NewFree(892.3G); Size(3.6T); Serial(WDC_WD40EFRX-68WT0N0_WD-WCC4E0323083); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(18); Name(disk18); Path(/mnt/disk18); Device(sdj); Type(Data); FsType(reiserfs); Free(3.6T); NewFree(3.6T); Size(3.6T); Serial(WDC_WD40EFRX-68WT0N0_WD-WCC4E0323101); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(19); Name(disk19); Path(/mnt/disk19); Device(sdr); Type(Data); FsType(xfs); Free(1001.3G); NewFree(1001.3G); Size(1.8T); Serial(WDC_WD2002FAEX-007BA0_WD-WMAY05129495); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(20); Name(disk20); Path(/mnt/disk20); Device(sdg); Type(Data); FsType(xfs); Free(4.6T); NewFree(4.6T); Size(7.3T); Serial(ST8000AS0002-1NA17Z_Z840GJB8); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(21); Name(disk21); Path(/mnt/disk21); Device(sdv); Type(Data); FsType(xfs); Free(7.3T); NewFree(7.3T); Size(7.3T); Serial(ST8000AS0002-1NA17Z_Z840GJ42); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(22); Name(disk22); Path(/mnt/disk22); Device(sdh); Type(Data); FsType(xfs); Free(7.3T); NewFree(7.3T); Size(7.3T); Serial(ST8000AS0002-1NA17Z_Z840EJLT); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(23); Name(disk23); Path(/mnt/disk23); Device(sdi); Type(Data); FsType(xfs); Free(7.3T); NewFree(7.3T); Size(7.3T); Serial(ST8000AS0002-1NA17Z_Z840G77J); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:19 unraid.go:386: Id(24); Name(cache); Path(/mnt/cache); Device(sdb); Type(Cache); FsType(xfs); Free(800.1G); NewFree(800.1G); Size(931.1G); Serial(Samsung_SSD_840_EVO_1TB_S1D9NSAF214743E); Status(DISK_OK); Bin(<nil>)
I: 2016/04/28 08:23:21 core.go:200: Adding folder (/TV Shows)

Link to comment

Hi...Very nice Plugin. But sorry to say I come here looking for help.

 

I did one test move of a TV show and all went wonderfully.  So I then said, ok, lets so some more and selected a number of shows I needed to move from DISK 1 as it was getting full. (Using High-water Mark so no idea why UnRaid is putting new shows on DISK 1 when it is 87% full compared to all other disks at 75%.)

 

Any way...I seem to get a permissions error.

 

I: 2016/04/29 08:38:22 core.go:249: Toggling dryRun from (true)
I: 2016/04/29 08:38:27 core.go:708: Running move operation ...
I: 2016/04/29 08:38:27 core.go:744: cmd(rsync -avX --partial "/mnt/disk1/TV/Quantico/Season 01" "/mnt/disk2/TV/Quantico")
I: 2016/04/29 08:38:27 core.go:753: sending incremental file list
I: 2016/04/29 08:38:27 core.go:753: created directory /mnt/disk2/TV/Quantico
I: 2016/04/29 08:38:27 core.go:753: Season 01/
W: 2016/04/29 08:38:27 shell.go:46: moveProgress:: rsync: send_files failed to open "/mnt/disk1/TV/Quantico/Season 01/Quantico - S01E06 - God-thumb.jpg": Permission denied (13)
I: 2016/04/29 08:38:27 core.go:753: Season 01/Quantico - S01E06 - God.nfo
W: 2016/04/29 08:38:27 shell.go:92: moveProgress::waitError:Status(13):Err(exit status 13):ExitErr(exit status 13)
W: 2016/04/29 08:38:27 core.go:763: Move command (rsync -avX --partial "/mnt/disk1/TV/Quantico/Season 01" "/mnt/disk2/TV/Quantico") was interrupted: exit status 13
I: 2016/04/29 08:38:27 unraid.go:373: Unraid Box Condition: &{NumDisks:6 NumProtected:6 Synced:2016-04-01 11:01:35 -0400 EDT SyncErrs:5 Resync:0 ResyncPos:0 State:STARTED Size:19123191214080 Free:4357804195840 NewFree:4357804195840}
I: 2016/04/29 08:38:27 unraid.go:374: Unraid Box SourceDiskName: 
I: 2016/04/29 08:38:27 unraid.go:375: Unraid Box BytesToMove: 0
I: 2016/04/29 08:38:27 unraid.go:386: Id(1); Name(disk1); Path(/mnt/disk1); Device(sdb); Type(Data); FsType(reiserfs); Free(500.8G); NewFree(500.8G); Size(3.6T); Serial(ST4000VN000-1H4168_Z300M7BZ); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 unraid.go:386: Id(2); Name(disk2); Path(/mnt/disk2); Device(sdc); Type(Data); FsType(reiserfs); Free(926G); NewFree(926G); Size(3.6T); Serial(ST4000VN000-1H4168_Z300MWV3); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 unraid.go:386: Id(3); Name(disk3); Path(/mnt/disk3); Device(sdd); Type(Data); FsType(reiserfs); Free(924.7G); NewFree(924.7G); Size(3.6T); Serial(ST4000VN000-1H4168_Z300MWVJ); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 unraid.go:386: Id(4); Name(disk4); Path(/mnt/disk4); Device(sde); Type(Data); FsType(reiserfs); Free(924.5G); NewFree(924.5G); Size(3.6T); Serial(ST4000VN000-1H4168_Z300MXL5); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 unraid.go:386: Id(5); Name(disk5); Path(/mnt/disk5); Device(sdf); Type(Data); FsType(reiserfs); Free(691.8G); NewFree(691.8G); Size(2.7T); Serial(WDC_WD30EZRX-00DC0B0_WD-WMC1T2418891); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 unraid.go:386: Id(24); Name(cache); Path(/mnt/cache); Device(sdg); Type(Cache); FsType(reiserfs); Free(90.7G); NewFree(90.7G); Size(111.8G); Serial(KINGSTON_SV300S37A120G_50026B726203EAE6); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 core.go:1015: unBALANCE - MOVE operation INTERRUPTED

 

Which totally makes no sense to me to have such an error.

 

Thanks

 

David

Link to comment

...

Your right, it actually is caused by using firefox it seems.

 

I thought it could be something like that. I'll look into it.

 

Hmm, it's still happening on Chrome.. but it's different. When I click "calculate" nothing happens at all now (no calculating animation icon, nothing). After that, the whole WebUI does not work, all the buttons do nothing. Restarting the WebUI fixes it, but hitting calculate once again just makes it all stop working again. Tried reinstalling the plugin, same thing.

 

EDIT: I believe it is caused by NOD32 anti-virus. Will test further. I also noticed some leftover processes that (may or may not) be related to this plugin. I killed them all and it didn't fix the issue, then I tried disabling my A/V, then it was working again. It could have been a delay until the processes were fully terminated, if I figure out the direct cause i'll post again.

a.png.a1f53d093856ea451145c0d52abf5358.png

Link to comment

Hi...Very nice Plugin. But sorry to say I come here looking for help.

 

I did one test move of a TV show and all went wonderfully.  So I then said, ok, lets so some more and selected a number of shows I needed to move from DISK 1 as it was getting full. (Using High-water Mark so no idea why UnRaid is putting new shows on DISK 1 when it is 87% full compared to all other disks at 75%.)

 

Any way...I seem to get a permissions error.

 

I: 2016/04/29 08:38:22 core.go:249: Toggling dryRun from (true)
I: 2016/04/29 08:38:27 core.go:708: Running move operation ...
I: 2016/04/29 08:38:27 core.go:744: cmd(rsync -avX --partial "/mnt/disk1/TV/Quantico/Season 01" "/mnt/disk2/TV/Quantico")
I: 2016/04/29 08:38:27 core.go:753: sending incremental file list
I: 2016/04/29 08:38:27 core.go:753: created directory /mnt/disk2/TV/Quantico
I: 2016/04/29 08:38:27 core.go:753: Season 01/
W: 2016/04/29 08:38:27 shell.go:46: moveProgress:: rsync: send_files failed to open "/mnt/disk1/TV/Quantico/Season 01/Quantico - S01E06 - God-thumb.jpg": Permission denied (13)
I: 2016/04/29 08:38:27 core.go:753: Season 01/Quantico - S01E06 - God.nfo
W: 2016/04/29 08:38:27 shell.go:92: moveProgress::waitError:Status(13):Err(exit status 13):ExitErr(exit status 13)
W: 2016/04/29 08:38:27 core.go:763: Move command (rsync -avX --partial "/mnt/disk1/TV/Quantico/Season 01" "/mnt/disk2/TV/Quantico") was interrupted: exit status 13
I: 2016/04/29 08:38:27 unraid.go:373: Unraid Box Condition: &{NumDisks:6 NumProtected:6 Synced:2016-04-01 11:01:35 -0400 EDT SyncErrs:5 Resync:0 ResyncPos:0 State:STARTED Size:19123191214080 Free:4357804195840 NewFree:4357804195840}
I: 2016/04/29 08:38:27 unraid.go:374: Unraid Box SourceDiskName: 
I: 2016/04/29 08:38:27 unraid.go:375: Unraid Box BytesToMove: 0
I: 2016/04/29 08:38:27 unraid.go:386: Id(1); Name(disk1); Path(/mnt/disk1); Device(sdb); Type(Data); FsType(reiserfs); Free(500.8G); NewFree(500.8G); Size(3.6T); Serial(ST4000VN000-1H4168_Z300M7BZ); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 unraid.go:386: Id(2); Name(disk2); Path(/mnt/disk2); Device(sdc); Type(Data); FsType(reiserfs); Free(926G); NewFree(926G); Size(3.6T); Serial(ST4000VN000-1H4168_Z300MWV3); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 unraid.go:386: Id(3); Name(disk3); Path(/mnt/disk3); Device(sdd); Type(Data); FsType(reiserfs); Free(924.7G); NewFree(924.7G); Size(3.6T); Serial(ST4000VN000-1H4168_Z300MWVJ); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 unraid.go:386: Id(4); Name(disk4); Path(/mnt/disk4); Device(sde); Type(Data); FsType(reiserfs); Free(924.5G); NewFree(924.5G); Size(3.6T); Serial(ST4000VN000-1H4168_Z300MXL5); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 unraid.go:386: Id(5); Name(disk5); Path(/mnt/disk5); Device(sdf); Type(Data); FsType(reiserfs); Free(691.8G); NewFree(691.8G); Size(2.7T); Serial(WDC_WD30EZRX-00DC0B0_WD-WMC1T2418891); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 unraid.go:386: Id(24); Name(cache); Path(/mnt/cache); Device(sdg); Type(Cache); FsType(reiserfs); Free(90.7G); NewFree(90.7G); Size(111.8G); Serial(KINGSTON_SV300S37A120G_50026B726203EAE6); Status(DISK_OK); Bin(<nil>)
I: 2016/04/29 08:38:27 core.go:1015: unBALANCE - MOVE operation INTERRUPTED

 

Which totally makes no sense to me to have such an error.

 

Thanks

 

David

 

Hi David, in the log, before the lines that you posted, there are the calculate lines which show linux permissions.

 

Can you post them here or send a pm if you like ?

Link to comment

... if I figure out the direct cause i'll post again.

 

I mentioned browsers because the app is using some features that require browser support.

 

I've mostly baked support directly into the app, but it seems some browsers are more finicky about it :)

 

Generally, Chrome has been the most compliant, that's why I suggested to use it.

 

But, if it's still not working for you, can you try Chrome, open the dev tools and see what, if any, errors are showing up in the console ?

Link to comment
  • jbrodriguez changed the title to [Plugin] unbalanced

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.