MAM59 Posted August 3, 2023 Share Posted August 3, 2023 Nono, you got me wrong. The setting I have in mind forbids the spreading up to a certain level of subfolders. You have to turn it off allowing the plugin to spread any level below data. The default is to keep folders together. Quote Link to comment
JUST-Plex Posted August 3, 2023 Share Posted August 3, 2023 Hi there ! I've seen a few exchanges on this thread about support for "unassigned devices" disks. I'm a new unraid user, and I have about 8 TB of data to copy to my newly installed Unraid! I used Unbalance to move data from a "POC" disk to my unraid cluster, and this tool convinced me not to use the rsync scripts I had prepared... My question is simple, does Unbalance now support unassigned disks? When I connect my disk and go into unbalance, I unfortunately don't have the option of selecting it. If anyone would like, I can also share my copy scripts. Thanks ! Quote Link to comment
FlyingTexan Posted August 4, 2023 Share Posted August 4, 2023 (edited) 6 hours ago, MAM59 said: Nono, you got me wrong. The setting I have in mind forbids the spreading up to a certain level of subfolders. You have to turn it off allowing the plugin to spread any level below data. The default is to keep folders together. Oh, I see Where is this setting? I don't see anything in the plugin itself. Every directory it says is too big Edited August 4, 2023 by FlyingTexan Quote Link to comment
FlyingTexan Posted August 4, 2023 Share Posted August 4, 2023 Ok so I managed to get it to pass the PLAN phase without having any errors. I had to go down several directories. /data wouldn't work but /data/media/movies would. My guess is because of how it structures it. It could then take the file sizes of each movie and put it in the appropriate directories (I'm hoping). This seems a bit of an oversight but glad it's at least something that can still work. Quote Link to comment
MAM59 Posted August 4, 2023 Share Posted August 4, 2023 I just installed it again (could not look for the setting before). It seems I was wrong, there is no actual setting, seems to be a builtin feature. But you already found the "full control manual" solution, select only a subfolder that is acceptable for plan, do move and then create a new plan with different subfolders and different target drives. Those days I thought it was a bug that unbalance has split the folders among several targets (I had only selected ONE drive but the plan filled up TWO). I've ended up thinking the file list (actually the folder list) became too long for the script to be handled, so I copied fewer folders in several sessions. Quote Link to comment
wickedathletes Posted August 14, 2023 Share Posted August 14, 2023 (edited) Question on data moving, I am in the process of converting to ifs so I was hoping to use unbalance as my method. However, whenever I try moving data from Drive A to Drive B-H (for example) it complains I do not have enough space to do it. Drive A is 14TB and I have for example 15.5TB free on my server (started with around 20TB). I get the following "error" (yes its not an error): PLANNING: Planning started PLANNING: Scanning data/media on /mnt/disk5 PLANNING: Checking issues ... PLANNING: Getting items ... PLANNING: Found /mnt/disk5/data/media/tv (1.57 TB) PLANNING: Found /mnt/disk5/data/media/movies (5.77 TB) PLANNING: Found /mnt/disk5/data/media/movies-4k (6.00 B) PLANNING: Found /mnt/disk5/data/media/tv-kids (32.12 GB) PLANNING: Found /mnt/disk5/data/media/music (6.00 B) PLANNING: Trying to allocate items to disk12 ... PLANNING: Trying to allocate items to disk11 ... PLANNING: Trying to allocate items to disk2 ... PLANNING: Trying to allocate items to disk8 ... PLANNING: Trying to allocate items to disk3 ... PLANNING: Trying to allocate items to disk6 ... PLANNING: Trying to allocate items to disk4 ... PLANNING: Trying to allocate items to disk7 ... PLANNING: Trying to allocate items to disk14 ... PLANNING: Trying to allocate items to disk10 ... PLANNING: Trying to allocate items to disk9 ... PLANNING: Trying to allocate items to disk13 ... PLANNING: Trying to allocate items to disk1 ... PLANNING: Ended: Aug 14, 2023 11:51:22 PLANNING: Elapsed: 0s PLANNING: The following items will not be transferred, because there's not enough space in the target disks: PLANNING: data/media/movies PLANNING: data/media/tv PLANNING: Planning Finished Do I have something in my share or drive settings causing it not to allow my current drives to accept files, like a threshold of sorts? I did try adjusting the share minimum free space to no avail. Each drive has between 400GB and 2TB free. Also, the unbalance app limit is set to 512MB. Edited August 14, 2023 by wickedathletes Quote Link to comment
CryPt00n Posted August 27, 2023 Share Posted August 27, 2023 Hi, any update on the planned multi cache-pool feature? Quote Link to comment
stephenwithph Posted September 12, 2023 Share Posted September 12, 2023 First of all, thank you so much for this plugin. I recently found it and love using it to optimize my shares. Second, is it possible to stack or queue up different tasks? Quote Link to comment
PassTheSalt Posted September 12, 2023 Share Posted September 12, 2023 Trying to move data from one cache drive to another but I don't see the second cache pool in unbalance? the first one shows up fine. Quote Link to comment
Darren Cook Posted September 23, 2023 Share Posted September 23, 2023 Is this ever going to be updated for ZFS pools? as seems to not find ZFS pools these days? 1 Quote Link to comment
vw-kombi Posted October 23, 2023 Share Posted October 23, 2023 Just put unbalance on my new backup unraid server - I cant until the dry run - nothing happens. Tries on my live server and it is not tickable there either. Whats going on ? Quote Link to comment
vw-kombi Posted October 23, 2023 Share Posted October 23, 2023 18 minutes ago, vw-kombi said: Just put unbalance on my new backup unraid server - I cant until the dry run - nothing happens. Tries on my live server and it is not tickable there either. Whats going on ? Never mind - its working now...... Has to be at the right place - cant just tick it any old time! Quote Link to comment
Phorte Posted November 8, 2023 Share Posted November 8, 2023 Just wanted to say that I used unBALANCE in the last week to move all data off one disk at a time to (finally) upgrade my array from ResiserFS to XFS and it worked without a hitch. Thank you so much for an amazing plugin. 2 Quote Link to comment
schreibman Posted November 15, 2023 Share Posted November 15, 2023 I'm sure this is user error, but I select from: Disk 1 select 14 TB folder to: Disk 1-4 all with 18 TB free When I run it 'scatters' all to the first disk selected, even though multiple disks selected. I'm sure this is user error. Quote Link to comment
ConnerVT Posted November 15, 2023 Share Posted November 15, 2023 The title "Scatter" is a bit misleading. What you observed is unBALANCED normal behavior. I generally move smaller chunks of data when I want to spread things across multiple disks. Quote Link to comment
Alyred Posted December 11, 2023 Share Posted December 11, 2023 Hi there, new to UnBalance and trying to use it to clear an array disk to reformat it from XFS to ZFS. Unfortunately, when I click on the "plan" option with the "from" and "to" drives selected, everything else unselected, and a few shares to test selected, I get the "wait" animated icon in the top corner but I never see the planning log. The log page itself doesn't seem to display anything either. Once I hit "plan" with the "dry run" option still selected, it doesn't seem to be doing anything else after a good hour of waiting. Am I missing some option? I turned off the server for the time being through the plugin GUI interface. Anything else I need to do to make sure the Unbalance server is not still stuck in a loop or anything in the background? Quote Link to comment
LanceM26 Posted December 14, 2023 Share Posted December 14, 2023 Hello, I was using Gather to move stuff from an older 3TB (disk 4) drive onto my new 14TB (disk 1) drive. I did the dry run and had green checkmarks for all the files and folders. Once I did the actual run, I had yellow checkmarks for some items. When the run completed, I got this: So I went to go look at the files in "/mnt/disk 4" they aren't there anymore Where did the files go and what can I do to prevent this from happening again? Quote Link to comment
jbrodriguez Posted December 15, 2023 Author Share Posted December 15, 2023 On 12/11/2023 at 4:29 AM, Alyred said: Hi there, new to UnBalance and trying to use it to clear an array disk to reformat it from XFS to ZFS. Unfortunately, when I click on the "plan" option with the "from" and "to" drives selected, everything else unselected, and a few shares to test selected, I get the "wait" animated icon in the top corner but I never see the planning log. The log page itself doesn't seem to display anything either. Once I hit "plan" with the "dry run" option still selected, it doesn't seem to be doing anything else after a good hour of waiting. Am I missing some option? I turned off the server for the time being through the plugin GUI interface. Anything else I need to do to make sure the Unbalance server is not still stuck in a loop or anything in the background? hi, it probably got stuck or crashed, try the following killall unbalance /usr/local/emhttp/plugins/unbalance/unbalance -port 6237 then monitor the output in the command line to get a clue Quote Link to comment
jbrodriguez Posted December 15, 2023 Author Share Posted December 15, 2023 19 hours ago, LanceM26 said: Hello, I was using Gather to move stuff from an older 3TB (disk 4) drive onto my new 14TB (disk 1) drive. I did the dry run and had green checkmarks for all the files and folders. Once I did the actual run, I had yellow checkmarks for some items. When the run completed, I got this: So I went to go look at the files in "/mnt/disk 4" they aren't there anymore Where did the files go and what can I do to prevent this from happening again? yes, that's strange, when you get that warning unbalance specifically didn't remove source files/folder. did you run back to back operations ? do the logs show anything unusual ? Quote Link to comment
jbrodriguez Posted December 24, 2023 Author Share Posted December 24, 2023 there's something in the works with unbalance(d), i thought i could be done by now, turns out that's not the case 😀 happy holidays to all !! teaser pic: 5 1 Quote Link to comment
Vetteman Posted December 28, 2023 Share Posted December 28, 2023 (edited) Thank you very much for developing this plugin. I've used Unbalace a few times and truly appreciate your effort for the the wonderful app you have given us. Happy Holidays and have a fantastic New Year... Edited December 29, 2023 by Vetteman correct grammar 1 Quote Link to comment
2Cents Posted December 30, 2023 Share Posted December 30, 2023 Question on unbalance. I recently installed the unbalance plug in and used successfully. Then later added a couple new cache drives. Now I'm not seeing the new drives in unbalance. Is there something I have to do to refresh it? Quote Link to comment
jbrodriguez Posted December 30, 2023 Author Share Posted December 30, 2023 48 minutes ago, 2Cents said: Question on unbalance. I recently installed the unbalance plug in and used successfully. Then later added a couple new cache drives. Now I'm not seeing the new drives in unbalance. Is there something I have to do to refresh it? hi, cache pools are currently not properly detected, the last time i checked there wasn't a way to know which disks were part of a pool, so unbalance just plays it "safe" (reports the 1st disk) not sure if there have been changes recently, but i'll be looking into it now that i'm making some changes to the app 3 Quote Link to comment
Daxter Posted January 7 Share Posted January 7 Hi, I have an unBALANACE question that I saw a vague answer of somewhere else and wanted to get more details. Can I keep Plex running while using the Gather function to move 4.8TB of data from 2 drives to 1? It's all video files, and I want to move them from my disk1 & disk2 to disk3, but when I tried it unBALANCE said it would take 20 hours. I have several friends and family who use my Plex daily and I would prefer not to take it offline for that long. Thanks in advance Quote Link to comment
jbrodriguez Posted January 7 Author Share Posted January 7 2 hours ago, Daxter said: Hi, I have an unBALANACE question that I saw a vague answer of somewhere else and wanted to get more details. Can I keep Plex running while using the Gather function to move 4.8TB of data from 2 drives to 1? It's all video files, and I want to move them from my disk1 & disk2 to disk3, but when I tried it unBALANCE said it would take 20 hours. I have several friends and family who use my Plex daily and I would prefer not to take it offline for that long. Thanks in advance hi, the main issue for asking to run unbalance without other plugins/dockers running is a matter of space: if unbalance calculated drive1 had enough free space to gather all files, but then some new data is stored on that drive, reducing the free space, the operation may fail (it may not, if there's enough space). so, to answer the question, if you're just streaming from plex (reading data), you should be ok, the operation may be slower perhaps. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.