June 12, 20188 yr Author 2 hours ago, zhulick said: What's my best option for cleaning this up ? In the history tab of the app, provided you haven't run any operation, you should see your scatter/move interrupted. Then a list of all the rsync commands that were executed, the stopped one and those that are pending to be run. You can either replay the operation, so it runs to completion or manually remove the files on the source disk (via mc or similar). Or did you have a single rsync command running ?
June 12, 20188 yr Author 3 hours ago, kizer said: No its not working for us two. Lol I misread you then. Although AnnabellaRenee87 did manage to get it working. Do you have a bookmark to the plugin ? If you do the same, change http to https, does it work ?
June 12, 20188 yr hey Juan - is it possible to run multiple instances of unBALANCE concurrently? my use case is a 12+ drive array with less than 50% storage used, moving data around to encrypt drives then move data back on. thank you for your work, first time using and very appreciated.
June 12, 20188 yr 4 hours ago, jbrodriguez said: I misread you then. Although AnnabellaRenee87 did manage to get it working. Do you have a bookmark to the plugin ? If you do the same, change http to https, does it work ? Weird. I changed it to https:// and Chrome threw up a bunch are you sure warnings, but it seems to work. IE basically said. Page not found. So weird. I had zero issues running this a couple of weeks ago. At least there is a work around for now, but this is kinda odd.
June 13, 20188 yr Author 13 hours ago, itsrainingben said: hey Juan - is it possible to run multiple instances of unBALANCE concurrently? my use case is a 12+ drive array with less than 50% storage used, moving data around to encrypt drives then move data back on. thank you for your work, first time using and very appreciated. Hi, currently not possible. This has been brought forward before and general consesus is that it wouldn't really speed transfers up, assuming you have parity on. Thanks for the kind comment !
June 13, 20188 yr Author 11 hours ago, kizer said: At least there is a work around for now, but this is kinda odd. I'd say you have SSL set to auto. If that's the case, what happens is: - unRAID creates a self-signed certificate to enable https access on the server - unRAID redirects http to https internally So you can access unRAID stock gui via http and have no issues. This may have changed in later releases, but I haven't had the time to fully check it yet. What happens on the plugin side is: - unBALANCE detects the SSL set to auto, and the presence of the self-signed certificate - unBALANCE listens on https instead of http Since you're now connecting to an https endpoint with a self-signed certificate, the browser raises the warnings.
June 13, 20188 yr 10 hours ago, jbrodriguez said: I'd say you have SSL set to auto. If that's the case, what happens is: - unRAID creates a self-signed certificate to enable https access on the server - unRAID redirects http to https internally So you can access unRAID stock gui via http and have no issues. This may have changed in later releases, but I haven't had the time to fully check it yet. What happens on the plugin side is: - unBALANCE detects the SSL set to auto, and the presence of the self-signed certificate - unBALANCE listens on https instead of http Since you're now connecting to an https endpoint with a self-signed certificate, the browser raises the warnings. Exactly what it was. Found the SSL="auto" in my ident.conf file. Set it to "no" and it works just fine.
June 14, 20188 yr 3 hours ago, jbrodriguez said: In the history tab of the app, provided you haven't run any operation, you should see your scatter/move interrupted. Then a list of all the rsync commands that were executed, the stopped one and those that are pending to be run. You can either replay the operation, so it runs to completion or manually remove the files on the source disk (via mc or similar). Or did you have a single rsync command running ? Replay worked. Took a while to get the job to complete, but it finished just fine, cleaned up after itself etc...
June 15, 20188 yr Author 18 hours ago, zhulick said: Replay worked. Took a while to get the job to complete, but it finished just fine, cleaned up after itself etc... Awesome ! The most important thing is not to 'disturb' the source or destination disks by moving/copying/etc files/folders, so that the replay works with the same initial conditions (rsync will skip over files that it has already copied)
June 15, 20188 yr Author Is it possible it is the other way around ? The plugin listening on ipv4 rather than ipv6 ? I haven't taken any measures to support ipv6, haven't checked if it will work out of the box.
June 23, 20188 yr Hi, I've just installed unbalance plugin, but it only binds to IPv6 port 6237, is there an option to make it bind to IPv4 as well ? Thank you. George
June 24, 20188 yr Author Hi georgez, So far, I haven't found a way to bind to both and I'm guessing it prefers ipv6 to ipv4. I think I found a solution so that it binds to ipv4, but it requires a fix from a third-party library, so ETA for resolution is unknown. I'm curious ... does it not work at all with ipv6 ?
June 25, 20188 yr I hope someone have a easy fix for me. I've took the plunge and started to encrypt my unraid from an existing system. I've watched spaceinvader one so i got good understanding. I decided to just do as he did and keep my parity drive attached but I had to add a drive so I actually started with a clean drive that was reformatted and encrypted. I did everything as he did even ran the safe new permission before starting. Every thing went great I moved 100%. Then I did exactly as he did new config. I created my encrypted drive on the one I just empty. Last all I needed to do is move my last drive. And that's where the permissions in unbalance started to mess with me. But its only in my appdata folder. I can check everything on the drive but appdata and move just fine. So Anyone have a clue? I decided to just add my parity drive back and do a party sync. I don't know if this is will help but I thought i would try it. I looked at my unbalance.log and I see this come up i hope this will help fix my problem with the sync don't Quote planner.go:374: issues:owner(0):group(0):folder(0):file(0)
June 25, 20188 yr Author Hi, I'm not sure what you're reporting. I looked at the log you pm'd me, saw you did a scatter/move (successful), then you replayed it (?, not sure why), but it didn't have any overall effect (source files were already removed, dest files were already in place). The log line you sent is ok, it means there were no issues with owner/group/folder/file permissions (thus the 0). What do you mean about your appdata folder ?
June 25, 20188 yr On 6/24/2018 at 6:12 PM, jbrodriguez said: I'm curious ... does it not work at all with ipv6 ? To be honest, I have no idea how to setup my Mac and router to work with IPv6, hence it never worked for me. The link 'Open Web UI' points to an IPv4 URL http://10.0.1.21:6237, but it's listening on and IPv6 port, this is weird. George
June 25, 20188 yr Author 3 hours ago, intoran said: Any way to use this in conjunction with unassigned devices? I haven't considered it until now. I'll eventually look into it.
June 25, 20188 yr Author 3 hours ago, georgez said: http://10.0.1.21:6237, but it's listening on and IPv6 port, this is weird I'll do some checks on my test system, maybe ipv6 has been selected as priority ? I'll take a look.
June 26, 20188 yr 54 minutes ago, M4ST3R-OWNER said: this is what happens when i try to move my appdata folder? Yeah, don't do that. Much better to use @Squid's
June 26, 20188 yr 4 minutes ago, jonathanm said: Yeah, don't do that. Much better to use @Squid's so i just need do a back up and after i move the other files i should do restore? only thing i already moved half the data from another drive im working on the second drive. This does make more sense Im only have issues moving appdata over at this point nothing else.
June 26, 20188 yr 18 minutes ago, M4ST3R-OWNER said: so i just need do a back up and after i move the other files i should do restore? only thing i already moved half the data from another drive im working on the second drive. This does make more sense Im only have issues moving appdata over at this point nothing else. Appdata has different permission requirements than regular data - you don't want to change them with new permissions. And it's normally stored on the cache drive (I assume you're not running a cache?)
June 26, 20188 yr 5 minutes ago, Cessquill said: Appdata has different permission requirements than regular data - you don't want to change them with new permissions. And it's normally stored on the cache drive (I assume you're not running a cache?) no cache my thing is im getting "issues" when i try to copy/move my appdata. why couldn't i know about this before. o well i dont have that many apps installed so worse thing i just have to reinstall and setup my plugins? i think i can work around that if that is the case.
June 26, 20188 yr 3 minutes ago, M4ST3R-OWNER said: no cache my thing is im getting "issues" when i try to copy/move my appdata. why couldn't i know about this before. o well i dont have that many apps installed so worse thing i just have to reinstall and setup my plugins? i think i can work around that if that is the case. You could back up, remove files, make sure Appdata share is set up on new drive then restore? Like a lot of users on here I'm from when unRaid was just a NAS. Then came cache, then came dockers, and I upgraded as i went. Downside, there are pockets of scenarios now that might not be logical or documented as you'd expect. Upside, there is lots of help.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.