Furby8704 Posted January 15, 2016 Share Posted January 15, 2016 last time i completed a parity check was when i converted my drives to xfs i havent complete a parity check since and its been about 2-3 months now. im trying to complete a parity now but i keep getting errors it will eventually fail and red ball a drive or half of my array for some reason i the run new config to put things back and everything goes back to valid i stopped trying to complete the parity check for a few days and my arrary was still valid mover still worked fine and no errors when transferring from cache to protected array so i tried parity check again and same thing happens again with errors and redballs parity check also goes at 5mb so i know then its going to fail i bought new breakout and sata cables in case that was the issue but nope system diag is attached EDIT: i also tried building a new parity drive but still goes at 5mb and then continue to fails media-diagnostics-20160115-0108.zip Link to comment
JorgeB Posted January 15, 2016 Share Posted January 15, 2016 Disks 5 and 6 have a very high UDMA_CRC_Error_Count Device Model: WDC WD20EARX-00PASB0 Serial Number: WD-WCAZAK742892 199 UDMA_CRC_Error_Count 0x0032 200 001 000 Old_age Always - 19277 Device Model: Hitachi HDS5C3020ALA632 Serial Number: ML0220F319JXRN 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1042 Start a new parity check and monitor this attribute, if it increases change sata cables. Link to comment
Furby8704 Posted January 15, 2016 Author Share Posted January 15, 2016 thanks for the reply. i went ahead and replaced the cables for those drives running a new parity right now and its at 65mb big improvemnt from the 5mb its been going will leave it overnight and ill check in the morning for results Link to comment
Furby8704 Posted January 16, 2016 Author Share Posted January 16, 2016 Disks 5 and 6 have a very high UDMA_CRC_Error_Count Device Model: WDC WD20EARX-00PASB0 Serial Number: WD-WCAZAK742892 199 UDMA_CRC_Error_Count 0x0032 200 001 000 Old_age Always - 19277 Device Model: Hitachi HDS5C3020ALA632 Serial Number: ML0220F319JXRN 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1042 Start a new parity check and monitor this attribute, if it increases change sata cables. Thats Gold! Jerry Gold! changed cables and parity completed this morning! running a 2nd parity check right now to make sure all is well thanks again for your input! Link to comment
Furby8704 Posted January 17, 2016 Author Share Posted January 17, 2016 2nd parity check clear with no errors. All is well now. Thanks for the help! Appreciate it very much! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.