January 16, 201610 yr Pickup only - shipping most of this stuff will be fairly costly. Edit - more stuff found.. Edit - even more stuff found.. Edit - all gone.. All gear is free - I was going to sell them but got lazy. Donations of pizza and beer money accepted! Gear worked as of the point I stopped using them Items will get crossed off as they're claimed I won't reserve anything for more than a week for anyone The freebies: Available: All gone! Reserved: [squid | 2016-01-16] 2 x 3U SGI Rackable 16+2 bay hot swap chassis w/ 550W redundant PSU [squid | 2016-01-16] 1 x Foundry EdgeIron 24G 24-port gigabit switch [squid | 2016-01-16] 2 x Chenbro 12803 28-port SAS Expander [Whaler_99 | 2016-01-16] 1 x 3U SGI Rackable 16+2 bay hot swap chassis w/ 550W redundant PSU [Whaler_99 | 2016-01-16] 1 x IBM BladeCentre Chassis + HS21 Server blades + PDU - Blades have Xeon E5xxx CPUs, memory, disks [Whaler_99 | 2016-01-17] 1 x Foundry EdgeIron 24G 24-port gigabit switch [Whaler_99 | 2016-01-17] 1 x Intel S5000PSL Server Board with 2 x Xeon E5335 CPUs and 8GB DDR2 ECC FBDIMMs (with heatsinks if I can find them) [Whaler_99 | 2016-01-17] 2 x Brocade Silkworm 3800 16-port 2Gb fibre-channel switch [Whaler_99 | 2016-01-17] 2 x 2Gb fibre-channel adapters (PCI-X) [Whaler_99 | 2016-01-17] 2 x 2Gb Infiniband adapters (PCI-X) [Whaler_99 | 2016-01-17] 1 x IBM ServeRAID BR10i (LSI 1068, PCI-E) 8 x SAS adapter (note: 2TB drive support limit), with breakout cables [Whaler_99 | 2016-01-17] 1 x HP SAS3042-EL (LSI 1064, PCI-E) 4 x SAS adapter (note: 2TB drive support), with breakout cables [Whaler_99 | 2016-01-17] 6 x 4GB DDR3 Registered ECC VLP LR-DIMMs
January 16, 201610 yr Pickup only - shipping most of this stuff will be fairly costly. All gear is free - I was going to sell them but got lazy. Donations of pizza and beer money accepted! Gear worked as of the point I stopped using them Items will get crossed off as they're claimed I won't reserve anything for more than a week for anyone The freebies: 3 x 3U SGI Rackable 16+2 bay hot swap chassis w/ 550W redundant PSU 2 x Chenbro 12803 28-port SAS Expander 2 x Foundry EdgeIron 24G 24-port gigabit switch 2 x Brocade Silkworm 3800 16-port 2Gb fibre-channel switch Also available: 3 x 2Gb fibre-channel adapters (PCI-X) 3 x 2Gb Infiniband adapters (PCI-X) 1 x IBM ServeRAID BR10i 8 x SAS adapter (note: 2TB drive support limit), maybe with cables if I can find them 1 x IBM something or the 4 x SAS adapter (note: 2TB drive support), maybe with cables if i can find them 1 x IBM BladeCentre Chassis + HS21 Server blades Pictures of some of the gear below: 3 x SGI Rackable Chassis - Front, 16-bay hot swap, no ears or rails 3 x SGI Rackable Chassis - Inside, holds up to E-ATX, fans included + whatever else is inside.. 3 x SGI Rackable Chassis - Rear, 2-bay hot swap 2 x Chenbro 12803 SAS Expanders - will provide 1 x SFF8087-SFF8087 cable with each if I can find them 2 x Foundry EdgeIron 24G gigabit switches, ears included 2 x Brocade Silkworm 3800 fibre-channel switches, no ears or rails I will gladly pick up a 24 port switch, both SAS expanders, and 2 of the chassis today if you want
January 17, 201610 yr Is this the Trini from RFD? Would take a 24 port switch if you'd ship to Montreal. I'll pay shipping and more, of course. Joe
January 18, 201610 yr Nada, all claimed - unless Squid changes his mind this week Not going to change my mind
January 28, 201610 yr Author Wow not surprised this stuff went quick! Do you have extra hardware often? Probably every 6 months, but not as much as this round - that was an accumulation after a full home system replacement. I'll have a couple more cases and gigabit switches to get rid of over summer, but need to upgrade all my drives/ NICs first. I'll open another thread later in the year.
Archived
This topic is now archived and is closed to further replies.