taichou Posted October 25, 2009 Share Posted October 25, 2009 I am a novice and I just built a Unraid set up using some spare parts. I am using GA-K8U-939 motherboard with 2 GB RAM. Everything boots up fine but for some reason onboard NIC doesn't seem to work. It's supposed to be using Realtek 8100C Ethernet 10/100Mb LAN controller. Before I moved the board to new box, I tested in old box and it worked fine. I was able to pull up //tower homepage. Now that I moved the board to new box, it's not pulling any IP address. How do I know that the NIC is working correctly and maybe it's something else (I don't have a link light for NIC). Thanks!!! Link to comment
Joe L. Posted October 25, 2009 Share Posted October 25, 2009 I am a novice and I just built a Unraid set up using some spare parts. I am using GA-K8U-939 motherboard with 2 GB RAM. Everything boots up fine but for some reason onboard NIC doesn't seem to work. It's supposed to be using Realtek 8100C Ethernet 10/100Mb LAN controller. Before I moved the board to new box, I tested in old box and it worked fine. I was able to pull up //tower homepage. Now that I moved the board to new box, it's not pulling any IP address. How do I know that the NIC is working correctly and maybe it's something else (I don't have a link light for NIC). Thanks!!! It could be the LAN cable, or the built-in NIC might be disabled in the BIOS. Until you can see the "light" on the LAN connector you will not get too far. Post a copy of your syslog and we can see if anything else stands out. Joe L. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.