Unassigned Devices - Managing Disk Drives and Remote Shares Outside of The Unraid Array


Recommended Posts

I'm having a non-permissions related issue.

 

When I try to mount a remote SMB share, nothing happens. I put in the path, credentials, and share name. Save it. Click mount. Nothing happens. Check the log and it's empty. Any suggestions on how I might go about troubleshooting something like this?

 

The log can't be empty.  Be sure you are looking at the UD log and not the device log.  It's the icon in the upper right corner.

Link to comment

Toggling the security fixed the problem, but, here is my current UD share file for the affected device:

 

Can you post the UD log when this happened?

 

Here are the contents of the log:

 

Feb 05 07:43:52 Adding disk '/dev/sdi1'...
Feb 05 07:43:52 Mount drive command: /sbin/mount -t xfs -o rw,noatime,nodiratime,discard '/dev/sdi1' '/mnt/disks/Crucial SSD'
Feb 05 07:43:52 Successfully mounted '/dev/sdi1' on '/mnt/disks/Crucial SSD'.
Feb 05 07:43:52 Partition 'Crucial CT480M500SSD1 1307092A4C45' is not set as sharable and will not be shared...
Feb 05 07:43:52 Device '/dev/sdi1' script file not found. 'ADD' script not executed.
Feb 07 09:52:12 Error: No valid smb users defined. Share '/mnt/disks/Crucial SSD' cannot be accessed.
Feb 07 09:52:12 Defining share 'Crucial SSD' on file '/etc/samba/unassigned-shares/Crucial_SSD.conf'
Feb 07 09:52:12 Adding share 'Crucial SSD' to '/boot/config/smb-extra.conf'
Feb 07 09:52:12 Reloading Samba configuration...
Feb 07 09:52:12 Directory '/mnt/disks/Crucial SSD' shared successfully.
Feb 08 11:28:31 Reloading shared dir '/mnt/disks/Crucial SSD'.
Feb 08 11:28:31 Removing old config...
Feb 08 11:28:31 Removing SMB share file '/etc/samba/unassigned-shares/Crucial_SSD.conf'
Feb 08 11:28:31 Removing SMB share definitions from '/boot/config/smb-extra.conf'
Feb 08 11:28:31 Reloading Samba configuration..
Feb 08 11:28:31 Successfully removed SMB share 'Crucial SSD'.
Feb 08 11:28:31 Adding new config...
Feb 08 11:28:31 Error: No valid smb users defined. Share '/mnt/disks/Crucial SSD' cannot be accessed.
Feb 08 11:28:31 Defining share 'Crucial SSD' on file '/etc/samba/unassigned-shares/Crucial_SSD.conf'
Feb 08 11:28:31 Adding share 'Crucial SSD' to '/boot/config/smb-extra.conf'
Feb 08 11:28:31 Reloading Samba configuration...
Feb 08 11:28:31 Directory '/mnt/disks/Crucial SSD' shared successfully.
Feb 08 11:28:41 Reloading shared dir '/mnt/disks/Crucial SSD'.
Feb 08 11:28:41 Removing old config...
Feb 08 11:28:41 Removing SMB share file '/etc/samba/unassigned-shares/Crucial_SSD.conf'
Feb 08 11:28:41 Removing SMB share definitions from '/boot/config/smb-extra.conf'
Feb 08 11:28:41 Reloading Samba configuration..
Feb 08 11:28:41 Successfully removed SMB share 'Crucial SSD'.
Feb 08 11:28:41 Adding new config...
Feb 08 11:28:41 Defining share 'Crucial SSD' on file '/etc/samba/unassigned-shares/Crucial_SSD.conf'
Feb 08 11:28:41 Adding share 'Crucial SSD' to '/boot/config/smb-extra.conf'
Feb 08 11:28:41 Reloading Samba configuration...
Feb 08 11:28:41 Directory '/mnt/disks/Crucial SSD' shared successfully.

 

Attached are the diagnostics.

 

medianas-diagnostics-20170209-1608.zip

Link to comment

I'm getting repeated errors in my logs for a drive I thought was previously cleanly unmounted.  I plugged the drive back in and mounted the file system and the errors stop.  Once mounted, it is difficult to unmount.  I usually have to click on the unmount button in the WebGUI 5-10 times before it finally unmounts.  Once it finally unmounts, however, it still shows to be mounted in the OS if I check via command line.

 

Here's the diagnostics file:  https://goo.gl/Bk8N63

 

Thanks in advance for any suggestions to correct this issue.

 

Feb 10 05:37:40 MegaPlex kernel: ata9: irq_stat 0x80000040, connection status changed

Feb 10 05:37:40 MegaPlex kernel: ata9: SError: { DevExch }

Feb 10 05:37:40 MegaPlex kernel: ata9: hard resetting link

Feb 10 05:37:40 MegaPlex kernel: ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Feb 10 05:37:40 MegaPlex kernel: ata9.00: ATA-8: Hitachi HTS545050B9A302, 110217PBL400M7JBEGLV, PB4AC60Y, max UDMA/133

Feb 10 05:37:40 MegaPlex kernel: ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA

Feb 10 05:37:40 MegaPlex kernel: ata9.00: configured for UDMA/133

Feb 10 05:37:40 MegaPlex kernel: ata9: EH complete

Feb 10 05:37:40 MegaPlex kernel: scsi 11:0:0:0: Direct-Access ATA Hitachi HTS54505 C60Y PQ: 0 ANSI: 5

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] 976773168 512-byte logical blocks: (500 GB/466 GiB)

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: Attached scsi generic sg17 type 0

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Write Protect is off

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Mode Sense: 00 3a 00 00

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Feb 10 05:37:40 MegaPlex kernel: sds: sds1

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Attached SCSI disk

Feb 10 05:37:44 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:37:44 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:37:44 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:37:53 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:37:53 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:37:53 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:00 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:00 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:00 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:06 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:06 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:06 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:13 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:13 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:13 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:20 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:20 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:20 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:25 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:25 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:25 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:29 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:29 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:29 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:32 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:32 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:32 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:35 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:35 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:35 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:36 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:36 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:36 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:38 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:38 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:38 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Version 2015.3.14 integrated FUSE 27

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Mounted /dev/sds1 (Read-Write, label "", NTFS 3.1)

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,umask=000

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Mount options: rw,nodiratime,nodev,nosuid,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sds1,blkdev,blksize=4096

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Global ownership and permissions enforced, configuration type 1

Feb 10 05:41:08 MegaPlex ntfs-3g[8757]: Unmounting /dev/sds1 ()

Feb 10 05:41:08 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:08 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:08 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:10 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:10 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:10 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:13 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:13 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:13 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:18 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:18 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:18 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:23 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:23 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:23 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:29 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:29 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:29 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:36 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:36 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:36 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:45 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:45 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:45 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:54 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:54 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:54 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Version 2015.3.14 integrated FUSE 27

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Mounted /dev/sds1 (Read-Write, label "", NTFS 3.1)

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,umask=000

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Mount options: rw,nodiratime,nodev,nosuid,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sds1,blkdev,blksize=4096

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Global ownership and permissions enforced, configuration type 1

Link to comment

I'm getting repeated errors in my logs for a drive I thought was previously cleanly unmounted.  I plugged the drive back in and mounted the file system and the errors stop.  Once mounted, it is difficult to unmount.  I usually have to click on the unmount button in the WebGUI 5-10 times before it finally unmounts.  Once it finally unmounts, however, it still shows to be mounted in the OS if I check via command line.

 

Here's the diagnostics file:  https://goo.gl/Bk8N63

 

Thanks in advance for any suggestions to correct this issue.

 

Feb 10 05:37:40 MegaPlex kernel: ata9: irq_stat 0x80000040, connection status changed

Feb 10 05:37:40 MegaPlex kernel: ata9: SError: { DevExch }

Feb 10 05:37:40 MegaPlex kernel: ata9: hard resetting link

Feb 10 05:37:40 MegaPlex kernel: ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Feb 10 05:37:40 MegaPlex kernel: ata9.00: ATA-8: Hitachi HTS545050B9A302, 110217PBL400M7JBEGLV, PB4AC60Y, max UDMA/133

Feb 10 05:37:40 MegaPlex kernel: ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA

Feb 10 05:37:40 MegaPlex kernel: ata9.00: configured for UDMA/133

Feb 10 05:37:40 MegaPlex kernel: ata9: EH complete

Feb 10 05:37:40 MegaPlex kernel: scsi 11:0:0:0: Direct-Access ATA Hitachi HTS54505 C60Y PQ: 0 ANSI: 5

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] 976773168 512-byte logical blocks: (500 GB/466 GiB)

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: Attached scsi generic sg17 type 0

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Write Protect is off

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Mode Sense: 00 3a 00 00

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Feb 10 05:37:40 MegaPlex kernel: sds: sds1

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Attached SCSI disk

Feb 10 05:37:44 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:37:44 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:37:44 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:37:53 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:37:53 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:37:53 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:00 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:00 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:00 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:06 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:06 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:06 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:13 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:13 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:13 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:20 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:20 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:20 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:25 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:25 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:25 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:29 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:29 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:29 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:32 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:32 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:32 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:35 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:35 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:35 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:36 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:36 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:36 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:38 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:38 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:38 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Version 2015.3.14 integrated FUSE 27

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Mounted /dev/sds1 (Read-Write, label "", NTFS 3.1)

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,umask=000

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Mount options: rw,nodiratime,nodev,nosuid,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sds1,blkdev,blksize=4096

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Global ownership and permissions enforced, configuration type 1

Feb 10 05:41:08 MegaPlex ntfs-3g[8757]: Unmounting /dev/sds1 ()

Feb 10 05:41:08 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:08 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:08 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:10 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:10 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:10 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:13 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:13 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:13 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:18 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:18 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:18 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:23 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:23 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:23 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:29 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:29 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:29 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:36 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:36 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:36 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:45 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:45 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:45 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:54 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:54 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:54 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Version 2015.3.14 integrated FUSE 27

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Mounted /dev/sds1 (Read-Write, label "", NTFS 3.1)

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,umask=000

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Mount options: rw,nodiratime,nodev,nosuid,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sds1,blkdev,blksize=4096

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Global ownership and permissions enforced, configuration type 1

I don't think there is anything for repairing an NTFS filesystem on unRAID. You will have to plug it into a Windows computer and let it checkdisk.
Link to comment

I'm getting repeated errors in my logs for a drive I thought was previously cleanly unmounted.  I plugged the drive back in and mounted the file system and the errors stop.  Once mounted, it is difficult to unmount.  I usually have to click on the unmount button in the WebGUI 5-10 times before it finally unmounts.  Once it finally unmounts, however, it still shows to be mounted in the OS if I check via command line.

 

Here's the diagnostics file:  https://goo.gl/Bk8N63

 

Thanks in advance for any suggestions to correct this issue.

 

Feb 10 05:37:40 MegaPlex kernel: ata9: irq_stat 0x80000040, connection status changed

Feb 10 05:37:40 MegaPlex kernel: ata9: SError: { DevExch }

Feb 10 05:37:40 MegaPlex kernel: ata9: hard resetting link

Feb 10 05:37:40 MegaPlex kernel: ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Feb 10 05:37:40 MegaPlex kernel: ata9.00: ATA-8: Hitachi HTS545050B9A302, 110217PBL400M7JBEGLV, PB4AC60Y, max UDMA/133

Feb 10 05:37:40 MegaPlex kernel: ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA

Feb 10 05:37:40 MegaPlex kernel: ata9.00: configured for UDMA/133

Feb 10 05:37:40 MegaPlex kernel: ata9: EH complete

Feb 10 05:37:40 MegaPlex kernel: scsi 11:0:0:0: Direct-Access ATA Hitachi HTS54505 C60Y PQ: 0 ANSI: 5

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] 976773168 512-byte logical blocks: (500 GB/466 GiB)

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: Attached scsi generic sg17 type 0

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Write Protect is off

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Mode Sense: 00 3a 00 00

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Feb 10 05:37:40 MegaPlex kernel: sds: sds1

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Attached SCSI disk

Feb 10 05:37:44 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:37:44 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:37:44 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:37:53 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:37:53 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:37:53 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:00 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:00 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:00 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:06 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:06 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:06 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:13 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:13 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:13 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:20 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:20 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:20 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:25 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:25 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:25 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:29 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:29 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:29 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:32 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:32 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:32 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:35 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:35 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:35 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:36 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:36 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:36 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:38 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:38 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:38 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Version 2015.3.14 integrated FUSE 27

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Mounted /dev/sds1 (Read-Write, label "", NTFS 3.1)

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,umask=000

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Mount options: rw,nodiratime,nodev,nosuid,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sds1,blkdev,blksize=4096

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Global ownership and permissions enforced, configuration type 1

Feb 10 05:41:08 MegaPlex ntfs-3g[8757]: Unmounting /dev/sds1 ()

Feb 10 05:41:08 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:08 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:08 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:10 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:10 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:10 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:13 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:13 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:13 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:18 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:18 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:18 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:23 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:23 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:23 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:29 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:29 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:29 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:36 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:36 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:36 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:45 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:45 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:45 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:54 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:54 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:54 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Version 2015.3.14 integrated FUSE 27

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Mounted /dev/sds1 (Read-Write, label "", NTFS 3.1)

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,umask=000

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Mount options: rw,nodiratime,nodev,nosuid,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sds1,blkdev,blksize=4096

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Global ownership and permissions enforced, configuration type 1

I don't think there is anything for repairing an NTFS filesystem on unRAID. You will have to plug it into a Windows computer and let it checkdisk.

 

Would a corrupt NTFS filesystem prevent the disk from unmounting even though unassigned devices is reporting the drive to be unmounted?  I could plug it into windows to check the NTFS file system, but I really don't need to use this drive going forward.  I just plugged it back in to see if the repeated errors would stop.  Thanks for the prompt response!

Link to comment

I'm getting repeated errors in my logs for a drive I thought was previously cleanly unmounted.  I plugged the drive back in and mounted the file system and the errors stop.  Once mounted, it is difficult to unmount.  I usually have to click on the unmount button in the WebGUI 5-10 times before it finally unmounts.  Once it finally unmounts, however, it still shows to be mounted in the OS if I check via command line.

 

Here's the diagnostics file:  https://goo.gl/Bk8N63

 

Thanks in advance for any suggestions to correct this issue.

 

Feb 10 05:37:40 MegaPlex kernel: ata9: irq_stat 0x80000040, connection status changed

Feb 10 05:37:40 MegaPlex kernel: ata9: SError: { DevExch }

Feb 10 05:37:40 MegaPlex kernel: ata9: hard resetting link

Feb 10 05:37:40 MegaPlex kernel: ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Feb 10 05:37:40 MegaPlex kernel: ata9.00: ATA-8: Hitachi HTS545050B9A302, 110217PBL400M7JBEGLV, PB4AC60Y, max UDMA/133

Feb 10 05:37:40 MegaPlex kernel: ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA

Feb 10 05:37:40 MegaPlex kernel: ata9.00: configured for UDMA/133

Feb 10 05:37:40 MegaPlex kernel: ata9: EH complete

Feb 10 05:37:40 MegaPlex kernel: scsi 11:0:0:0: Direct-Access ATA Hitachi HTS54505 C60Y PQ: 0 ANSI: 5

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] 976773168 512-byte logical blocks: (500 GB/466 GiB)

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: Attached scsi generic sg17 type 0

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Write Protect is off

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Mode Sense: 00 3a 00 00

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Feb 10 05:37:40 MegaPlex kernel: sds: sds1

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Attached SCSI disk

Feb 10 05:37:44 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:37:44 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:37:44 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:37:53 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:37:53 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:37:53 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:00 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:00 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:00 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:06 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:06 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:06 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:13 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:13 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:13 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:20 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:20 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:20 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:25 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:25 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:25 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:29 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:29 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:29 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:32 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:32 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:32 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:35 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:35 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:35 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:36 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:36 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:36 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:38 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:38 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:38 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Version 2015.3.14 integrated FUSE 27

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Mounted /dev/sds1 (Read-Write, label "", NTFS 3.1)

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,umask=000

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Mount options: rw,nodiratime,nodev,nosuid,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sds1,blkdev,blksize=4096

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Global ownership and permissions enforced, configuration type 1

Feb 10 05:41:08 MegaPlex ntfs-3g[8757]: Unmounting /dev/sds1 ()

Feb 10 05:41:08 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:08 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:08 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:10 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:10 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:10 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:13 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:13 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:13 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:18 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:18 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:18 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:23 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:23 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:23 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:29 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:29 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:29 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:36 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:36 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:36 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:45 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:45 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:45 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:54 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:54 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:54 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Version 2015.3.14 integrated FUSE 27

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Mounted /dev/sds1 (Read-Write, label "", NTFS 3.1)

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,umask=000

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Mount options: rw,nodiratime,nodev,nosuid,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sds1,blkdev,blksize=4096

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Global ownership and permissions enforced, configuration type 1

I don't think there is anything for repairing an NTFS filesystem on unRAID. You will have to plug it into a Windows computer and let it checkdisk.

 

Would a corrupt NTFS filesystem prevent the disk from unmounting even though unassigned devices is reporting the drive to be unmounted?  I could plug it into windows to check the NTFS file system, but I really don't need to use this drive going forward.  I just plugged it back in to see if the repeated errors would stop.  Thanks for the prompt response!

 

I plugged the drive back into a windows machine and ran a checkdisk.  It did not detect any errors so I reformatted the drive just to be sure.  Stuck it back into Unraid, and it mounts and unmounts cleanly now. But....... the server still thinks the drive is mounted (old mount point) and I am getting repeated errors I can't stop now.  Any other suggestions?

Link to comment

I'm getting repeated errors in my logs for a drive I thought was previously cleanly unmounted.  I plugged the drive back in and mounted the file system and the errors stop.  Once mounted, it is difficult to unmount.  I usually have to click on the unmount button in the WebGUI 5-10 times before it finally unmounts.  Once it finally unmounts, however, it still shows to be mounted in the OS if I check via command line.

 

Here's the diagnostics file:  https://goo.gl/Bk8N63

 

Thanks in advance for any suggestions to correct this issue.

 

Feb 10 05:37:40 MegaPlex kernel: ata9: irq_stat 0x80000040, connection status changed

Feb 10 05:37:40 MegaPlex kernel: ata9: SError: { DevExch }

Feb 10 05:37:40 MegaPlex kernel: ata9: hard resetting link

Feb 10 05:37:40 MegaPlex kernel: ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

Feb 10 05:37:40 MegaPlex kernel: ata9.00: ATA-8: Hitachi HTS545050B9A302, 110217PBL400M7JBEGLV, PB4AC60Y, max UDMA/133

Feb 10 05:37:40 MegaPlex kernel: ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA

Feb 10 05:37:40 MegaPlex kernel: ata9.00: configured for UDMA/133

Feb 10 05:37:40 MegaPlex kernel: ata9: EH complete

Feb 10 05:37:40 MegaPlex kernel: scsi 11:0:0:0: Direct-Access ATA Hitachi HTS54505 C60Y PQ: 0 ANSI: 5

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] 976773168 512-byte logical blocks: (500 GB/466 GiB)

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: Attached scsi generic sg17 type 0

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Write Protect is off

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Mode Sense: 00 3a 00 00

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Feb 10 05:37:40 MegaPlex kernel: sds: sds1

Feb 10 05:37:40 MegaPlex kernel: sd 11:0:0:0: [sds] Attached SCSI disk

Feb 10 05:37:44 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:37:44 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:37:44 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:37:53 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:37:53 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:37:53 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:00 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:00 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:00 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:06 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:06 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:06 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:13 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:13 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:13 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:20 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:20 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:20 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:25 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:25 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:25 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:29 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:29 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:29 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:32 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:32 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:32 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:35 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:35 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:35 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:36 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:36 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:36 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:38 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:38:38 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:38:38 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Version 2015.3.14 integrated FUSE 27

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Mounted /dev/sds1 (Read-Write, label "", NTFS 3.1)

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,umask=000

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Mount options: rw,nodiratime,nodev,nosuid,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sds1,blkdev,blksize=4096

Feb 10 05:38:38 MegaPlex ntfs-3g[8757]: Global ownership and permissions enforced, configuration type 1

Feb 10 05:41:08 MegaPlex ntfs-3g[8757]: Unmounting /dev/sds1 ()

Feb 10 05:41:08 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:08 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:08 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:10 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:10 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:10 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:13 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:13 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:13 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:18 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:18 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:18 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:23 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:23 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:23 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:29 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:29 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:29 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:36 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:36 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:36 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:45 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:45 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:45 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:41:54 MegaPlex ntfs-3g[11697]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error

Feb 10 05:41:54 MegaPlex ntfs-3g[11697]: Failed to read index block: Input/output error

Feb 10 05:41:54 MegaPlex kernel: Buffer I/O error on dev sdc1, logical block 15262053, async page read

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Version 2015.3.14 integrated FUSE 27

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Mounted /dev/sds1 (Read-Write, label "", NTFS 3.1)

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,umask=000

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Mount options: rw,nodiratime,nodev,nosuid,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sds1,blkdev,blksize=4096

Feb 10 05:42:03 MegaPlex ntfs-3g[23250]: Global ownership and permissions enforced, configuration type 1

I don't think there is anything for repairing an NTFS filesystem on unRAID. You will have to plug it into a Windows computer and let it checkdisk.

 

UD can check the NTFS file system.  Click on the + next to the mount point when the disk is not mounted and you can click on the graphic to check the file system.  You are given an opportunity to do a repair if needed.  Hover your mouse over the active items and you'll see a tool tip describing what the action will be if the active item is clicked.

Link to comment

UD can check the NTFS file system.  Click on the + next to the mount point when the disk is not mounted and you can click on the graphic to check the file system.  You are given an opportunity to do a repair if needed.  Hover your mouse over the active items and you'll see a tool tip describing what the action will be if the active item is clicked.

Thanks, good to know since I only use NTFS disks with Unassigned Devices.
Link to comment

Reboot.

 

Once the current jobs I'm running are completed on my VM's, I'll reboot.  Was trying to avoid the reboot if possible, but seems like it will be unavoidable.  Thanks again!

 

Reboot worked.  Thanks for responses, and thanks for pointing out how to do an NTFS checkdisk.  I was not aware of that functionality.

Link to comment

Reboot.

 

Once the current jobs I'm running are completed on my VM's, I'll reboot.  Was trying to avoid the reboot if possible, but seems like it will be unavoidable.  Thanks again!

 

Reboot worked.  Thanks for responses, and thanks for pointing out how to do an NTFS checkdisk.  I was not aware of that functionality.

 

Is there a chance you removed the device while it was still mounted?

 

All of the different file systems on UD devices can be checked in the same way.

Link to comment

Reboot.

 

Once the current jobs I'm running are completed on my VM's, I'll reboot.  Was trying to avoid the reboot if possible, but seems like it will be unavoidable.  Thanks again!

 

Reboot worked.  Thanks for responses, and thanks for pointing out how to do an NTFS checkdisk.  I was not aware of that functionality.

 

Is there a chance you removed the device while it was still mounted?

 

All of the different file systems on UD devices can be checked in the same way.

 

Yes, it's possible I removed it without unmounting, but...  I am 99% positive I rebooted a few times since.  Thanks again!

Link to comment

Hello everyone. I'm looking for a way to mount a ssd that is not in my array directly to a virtual machine as a physical disk. The first two posts here allude to that being possible with this plugin, but I cant seem to find where in the interface to accomplish this. Do I still need to modify my XML for my VM to pass through the SSD to the VM?

Link to comment

Hello everyone. I'm looking for a way to mount a ssd that is not in my array directly to a virtual machine as a physical disk. The first two posts here allude to that being possible with this plugin, but I cant seem to find where in the interface to accomplish this. Do I still need to modify my XML for my VM to pass through the SSD to the VM?

 

You have to add the disk directly into your XML.

 

1) Open an SSH/Telnet session to your server and run

 

find /dev/disk/by-id  ! \( -iname "*-part*" -o -iname "wwn-*" \)

 

You must save the entry for your SSD, e.g. /dev/disk/by-id/ata-Samsung_SSD_840_EVO_250GB_XXXXXXXXXX.

 

2) Edit your VM XML file, changing it accordingly:

 

<disk type="block" device="disk">

  <driver name="qemu" type="raw"/>

  <source dev="/dev/disk/by-id/ata-Samsung_SSD_840_EVO_250GB_XXXXXXXXXX"/>

  <target dev="vdd" bus="virtio"/>

  <address type="pci" domain="0x0000" bus="0x00" slot="0x09" function="0x0"/>

</disk>

Link to comment

I followed your comments and found that the ID is "/dev/disk/by-id/ata-MKNSSDCR480GB-DX7_MK130912AS1103089" so the xml should read

<disk type="block" device="disk">

  <driver name="qemu" type="raw"/>

  <source dev="/dev/disk/by-id/ata-MKNSSDCR480GB-DX7_MK130912AS1103089"/>

  <target dev="vdd" bus="virtio"/>

  <address type="pci" domain="0x0000" bus="0x00" slot="0x09" function="0x0"/>

</disk>

However, I get an error

VM creation error

 

XML error: Attempted double use of PCI slot 0000:00:09.0 (may need "multifunction='on'" for device on function 0)

I don't know too much about PCI addresses, but in the full XML at the end of this post you might see that its already referenced in

<memballoon model='virtio'>

  <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>

</memballoon>

According to System Devices the following is true

[0:0:0:0]    disk    SanDisk  Ultra Fit        1.00  /dev/sda  30.7GB

[1:0:1:0]    disk    ATA      MKNSSDCR480GB-DX BBF0  /dev/sdb    480GB

[3:0:0:0]    disk    ATA      WDC WD3200AAJS-2 3E01  /dev/sdc    320GB

[5:0:0:0]    disk    ATA      Hitachi HDS72101 A3MA  /dev/sdd  1.00TB

[6:0:0:0]    disk    ATA      WDC WD10EZEX-08W 1A01  /dev/sde  1.00TB

I have the device unmounted in Unassigned Devices, which is how I have attached physical drives to vm's in other hosts so I don't think that's it. Anyway, i appreciate your help and if you want to point me towards the proper place to ask this question if its unrelated to UD then please suggest the proper forum. Thanks again, and heres the full XML

<domain type='kvm'>

  <name>david</name>

  <uuid>6cfb64c7-e9a0-ef59-2fa9-71e58b5a0f96</uuid>

  <metadata>

    <vmtemplate xmlns="unraid" name="Windows 7" icon="windows7.png" os="windows7"/>

  </metadata>

  <memory unit='KiB'>14155776</memory>

  <currentMemory unit='KiB'>14155776</currentMemory>

  <memoryBacking>

    <nosharepages/>

  </memoryBacking>

  <vcpu placement='static'>6</vcpu>

  <cputune>

    <vcpupin vcpu='0' cpuset='0'/>

    <vcpupin vcpu='1' cpuset='1'/>

    <vcpupin vcpu='2' cpuset='2'/>

    <vcpupin vcpu='3' cpuset='3'/>

    <vcpupin vcpu='4' cpuset='4'/>

    <vcpupin vcpu='5' cpuset='5'/>

  </cputune>

  <os>

    <type arch='x86_64' machine='pc-i440fx-2.7'>hvm</type>

  </os>

  <features>

    <acpi/>

    <apic/>

  </features>

  <cpu mode='host-passthrough'>

    <topology sockets='1' cores='6' threads='1'/>

  </cpu>

  <clock offset='localtime'>

    <timer name='rtc' tickpolicy='catchup'/>

    <timer name='pit' tickpolicy='delay'/>

    <timer name='hpet' present='no'/>

  </clock>

  <on_poweroff>destroy</on_poweroff>

  <on_reboot>restart</on_reboot>

  <on_crash>restart</on_crash>

  <devices>

    <emulator>/usr/local/sbin/qemu</emulator>

    <disk type="block" device="disk">

      <driver name="qemu" type="raw"/>

      <source dev="/dev/disk/by-id/ata-MKNSSDCR480GB-DX7_MK130912AS1103089"/>

      <target dev="vdd" bus="virtio"/>

      <address type="pci" domain="0x0000" bus="0x00" slot="0x09" function="0x0"/>

    </disk>

    <disk type='file' device='cdrom'>

      <driver name='qemu' type='raw'/>

      <source file='/mnt/user/isos/Windows 7 SP1 Ultimate (64 Bit).iso'/>

      <target dev='hda' bus='ide'/>

      <readonly/>

      <boot order='2'/>

      <address type='drive' controller='0' bus='0' target='0' unit='0'/>

    </disk>

    <disk type='file' device='cdrom'>

      <driver name='qemu' type='raw'/>

      <source file='/mnt/user/isos/virtio-win-0.1.126-2.iso'/>

      <target dev='hdb' bus='ide'/>

      <readonly/>

      <address type='drive' controller='0' bus='0' target='0' unit='1'/>

    </disk>

    <controller type='usb' index='0' model='ich9-ehci1'>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>

    </controller>

    <controller type='usb' index='0' model='ich9-uhci1'>

      <master startport='0'/>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>

    </controller>

    <controller type='usb' index='0' model='ich9-uhci2'>

      <master startport='2'/>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>

    </controller>

    <controller type='usb' index='0' model='ich9-uhci3'>

      <master startport='4'/>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>

    </controller>

    <controller type='pci' index='0' model='pci-root'/>

    <controller type='ide' index='0'>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>

    </controller>

    <controller type='virtio-serial' index='0'>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>

    </controller>

    <controller type='sata' index='0'>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>

    </controller>

    <controller type='sata' index='1'>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>

    </controller>

    <interface type='bridge'>

      <mac address='52:54:00:ee:ed:3a'/>

      <source bridge='br0'/>

      <model type='virtio'/>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>

    </interface>

    <serial type='pty'>

      <target port='0'/>

    </serial>

    <console type='pty'>

      <target type='serial' port='0'/>

    </console>

    <channel type='unix'>

      <target type='virtio' name='org.qemu.guest_agent.0'/>

      <address type='virtio-serial' controller='0' bus='0' port='1'/>

    </channel>

    <input type='mouse' bus='ps2'/>

    <input type='keyboard' bus='ps2'/>

    <hostdev mode='subsystem' type='pci' managed='yes' xvga='yes'>

      <driver name='vfio'/>

      <source>

        <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>

      </source>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>

    </hostdev>

    <hostdev mode='subsystem' type='pci' managed='yes'>

      <driver name='vfio'/>

      <source>

        <address domain='0x0000' bus='0x01' slot='0x00' function='0x1'/>

      </source>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>

    </hostdev>

    <hostdev mode='subsystem' type='pci' managed='yes'>

      <driver name='vfio'/>

      <source>

        <address domain='0x0000' bus='0x00' slot='0x14' function='0x2'/>

      </source>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>

    </hostdev>

    <hostdev mode='subsystem' type='usb' managed='no'>

      <source>

        <vendor id='0x046d'/>

        <product id='0x082d'/>

      </source>

      <address type='usb' bus='0' port='1'/>

    </hostdev>

    <hostdev mode='subsystem' type='usb' managed='no'>

      <source>

        <vendor id='0x046d'/>

        <product id='0xc31c'/>

      </source>

      <address type='usb' bus='0' port='2'/>

    </hostdev>

    <hostdev mode='subsystem' type='usb' managed='no'>

      <source>

        <vendor id='0x1e7d'/>

        <product id='0x2e22'/>

      </source>

      <address type='usb' bus='0' port='3'/>

    </hostdev>

    <memballoon model='virtio'>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>

    </memballoon>

  </devices>

</domain>

Link to comment

Shoot, I hate when this happens. I went to Outback with the wife, came back and put her to bed and now its working without me changing anything. Somehow it decided to change the XML accordingly

    <disk type='block' device='disk'>

      <driver name='qemu' type='raw'/>

      <source dev='/dev/disk/by-id/ata-MKNSSDCR480GB-DX7_MK130912AS1103089'/>

      <backingStore/>

      <target dev='hdd' bus='virtio'/>

      <alias name='virtio-disk3'/>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>

    </disk>

Which caused the machine to boot to my windows installer, and the unraid driver detected the SSD I passed through with no problem and I'm now installing Windows. The problem is I don't know what to learn from this? Why did it create the alias name  and backingStore lines?, and how am I supposed to determine the address type in the future so I can understand why it worked?

Link to comment
  • trurl pinned this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.