Jump to content
binhex

[Support] binhex - General

120 posts in this topic Last Reply

Recommended Posts

On 1/28/2016 at 9:00 AM, binhex said:

Further help

 

OK so you've read all the FAQ's above right and you're still stuck, in that case you will need to perform the following, remember without logs there is little chance of resolving your issue:-

 

1. Delete any existing supervisord.log file located in /config/

2. Stop the container and delete it (or if you're an unraid user skip this step).

3. Set the env var key "DEBUG" to a value of "true".

4. Start the container and wait 5 mins for it to completely finish initialising.

5. Post the ENTIRE /config/supervisord.log file in the correct support thread for the container you're running.

 

IMPORTANT - Make sure to remove any reference to your username and password from the supervisord.log BEFORE posting it.

Hi @binhex. I'm having trouble getting my binhex-delugevpn container to show the WebUI. I am able to see the WebUI in bridge mode and when I assign binhex-delugevpn its own IP address, I am able to see the WebUI if the VPN is off. My VPN connects successfully, I can run curl in the container to ip4.me and it gives me a valid IP address saying I am in the Netherlands (as shows in my supervisord.log). I am also authenticating with the "auth-user-pass credentials.conf" setting in my .ovpn OpenVPN config file.

 

Any suggestions would be appreciated. Thanks!

manifest3r_supervisord.log

Edited by manifest3r

Share this post


Link to post
3 hours ago, manifest3r said:

Hi @binhex. I'm having trouble getting my binhex-delugevpn container to show the WebUI.

 

From the very first sentence in the very first post in this thread:

Quote

Important - This thread is NOT for support of Docker images, please use the separate support threads shown in the "Docker Images" section shown further below.

 

You can always get to the correct support thread for any docker from its listing in Community Applications, or by clicking on that docker's icon in the webUI and selecting Support.

Share this post


Link to post

I have been running Needo's MariaDB docker for some years but, according to Fix Common Problems, its use is deprecated.  FCP advises me to use MariaDB from the linuxserver or Binhex repository instead.  My problem is that I cannot find binhex-mariadb - does it exist?

 

Having encountered difficulties with a linuxserver offering in the past, I'm a little hesitant to adopt that one.  If there's no Binhex build, I'll stick with the Needo version which is not giving me any problems at the moment.

Share this post


Link to post
2 hours ago, PeterB said:

My problem is that I cannot find binhex-mariadb - does it exist?

it doesnt exist, not sure if @Squid just assumed it did exist and hard coded that text into FCP perhaps?.

Share this post


Link to post
2 hours ago, binhex said:

it doesnt exist, not sure if @Squid just assumed it did exist and hard coded that text into FCP perhaps?.

Perhaps this is the hint that it should exist!

Share this post


Link to post
1 hour ago, PeterB said:

Perhaps this is the hint that it should exist!

lol, yeah i will get my team on it 🙂

Share this post


Link to post
On 10/11/2018 at 3:56 AM, death.hilarious said:

Oh, that sounds pretty handy. +1 

For those of you familiar with Plex and the plugin Sub-Zero. The creator of Sub-Zero is combining forces with Bazarr, witch is the reason I hope for a Binhex container :)

 

See below

https://www.reddit.com/r/PleX/comments/9n9qjl/subzero_the_future/

 

Edited by thostr
forgot link

Share this post


Link to post

may i ask for a privoxy/vpn docker only (without sonarr or deluge), my user case is vpn proxy only ... i dont use any torrents etc ...

 

currently i use your deluge vpn container and its working perfectly, just thought about overacting for proxy usage only ;)

Share this post


Link to post
On 11/18/2018 at 8:05 AM, alturismo said:

may i ask for a privoxy/vpn docker only (without sonarr or deluge), my user case is vpn proxy only ... i dont use any torrents etc ...

 

currently i use your deluge vpn container and its working perfectly, just thought about overacting for proxy usage only ;)

 

 

I was actually coming here to ask for the same thing!

 

1. Would it be possible to get a Privoxy/OpenVPN container without any associated app? 

 

2. Is it possible to run a privoxy container on a static IP (Custom: br:0)?

Anytime I try and set a static IP for a Privoxy/OpenVPN container the proxy fails when connected from my Win10 laptop.

 

Thanks a million for all your hard work binhex!

Share this post


Link to post
4 minutes ago, Capt.Insano said:

 

 

I was actually coming here to ask for the same thing!

 

1. Would it be possible to get a Privoxy/OpenVPN container without any associated app? 

 

2. Is it possible to run a privoxy container on a static IP (Custom: br:0)?

Anytime I try and set a static IP for a Privoxy/OpenVPN container the proxy fails when connected from my Win10 laptop.

 

Thanks a million for all your hard work binhex!

may an alternative, i hope its not again the rule to post that here, just as hint for users like me wich dont want anything besides an vpn/privoxy

Alternative from Dockerhub, needs some modifications cause preconfigured for PIA only, i use hideme as vpn provider, no fire and forget like binhex´s one ;)

 

andymeful/privoxy-openvpn 10 mb in size ... instead the 1.9 gigs i had with deluge.

 

and as mentioned, deluge-vpn working out of the box (always super stable) and i really appreciated it, just as alternative ... for VPN proxy only.

Share this post


Link to post
On 2/13/2019 at 5:36 PM, alturismo said:

may an alternative, i hope its not again the rule to post that here, just as hint for users like me wich dont want anything besides an vpn/privoxy

Alternative from Dockerhub, needs some modifications cause preconfigured for PIA only, i use hideme as vpn provider, no fire and forget like binhex´s one ;)

 

andymeful/privoxy-openvpn 10 mb in size ... instead the 1.9 gigs i had with deluge.

 

and as mentioned, deluge-vpn working out of the box (always super stable) and i really appreciated it, just as alternative ... for VPN proxy only.

 

 

I had actually tried that container prior to posting but I could not get my .opvn file to be correctly seen by the container, I kept getting errors in the log about no configuration file found.

 

I do not want to be too off topic but, would you mind posting a picture of your configuration if you have it successfully working?

 

Otherwise: @binhex do you have ant interest in making such a container with unRAID based settings?

 

Share this post


Link to post
2 hours ago, Capt.Insano said:

Otherwise: @binhex do you have ant interest in making such a container with unRAID based settings?

i will take a look and see how much work it is, i got a lot going on at the mo so no promises of a quick turn around, that is unless its really simple 🙂

Share this post


Link to post
15 hours ago, binhex said:

i will take a look and see how much work it is, i got a lot going on at the mo so no promises of a quick turn around, that is unless its really simple 🙂

thats great news ;)

17 hours ago, Capt.Insano said:

 

 

I had actually tried that container prior to posting but I could not get my .opvn file to be correctly seen by the container, I kept getting errors in the log about no configuration file found.

 

I do not want to be too off topic but, would you mind posting a picture of your configuration if you have it successfully working?

 

Otherwise: @binhex do you have ant interest in making such a container with unRAID based settings?

 

sorry but i guess that would be a too much here in binhex´s gerneral topic ... if he says ok then of course and i also dont want to open a topic for "others" work, probably also not nice to see here ...

Share this post


Link to post
i will take a look and see how much work it is, i got a lot going on at the mo so no promises of a quick turn around, that is unless its really simple
Annnnd it's done, available on CA, have fun guys.

Sent from my EML-L29 using Tapatalk

Share this post


Link to post

thank you very much, even i hoped size shrinks more ;) working as expected as fire and forget, great as always ;)

Share this post


Link to post
On 2/15/2019 at 6:26 PM, binhex said:

Annnnd it's done, available on CA, have fun guys.

Sent from my EML-L29 using Tapatalk
 

Thanks a million @binhex.

 

I am away for the next week but will defo get on it once I am home!!

Share this post


Link to post

@binhex Can you do a FireFox/Chrome VNC docker, the current one by @Djoss is running old FireFox and they use a diff linux distro that isnt staying as current as Arch is.

Share this post


Link to post

I apologize @binhex for the direct message, as I did not see this thread... I am also wanting to get a status update/request in for a Firefox/Chrome docker with possible Privoxy support (though that could just be pointed through the browser to your other privoxy solution as well).

 

Sorry again and thank you for all you do!

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.