[Support] binhex - DelugeVPN


Recommended Posts

1 hour ago, binhex said:

This is a known issue with Mac os creating crap on disk, I've pushed a change through that should fix it, please pull down the latest image just built and give it a whirl.

Sent from my SM-G935F using Tapatalk
 

@binhex thank you so much for this! I’ll update once I’m home:)

Link to comment
4 hours ago, harriedr said:

I updated my docker tonight, and for some reason, I can not access the web UI and also, it has taken down all my proxies for sonarr. Any ideas?

supervisord.log

 

i would suspect the vpn endpoint is down, try another one, you are currently pointing at:-

 

tor-c03.ipvanish.com

that looks very specific, you might want to go for a more generic endpoint if possible.

Link to comment

may i ask if theres a way to return to a previous version, since update today all i get in log is

 

i tries different VPN AP but always the same .. and it just worked before the update ;) now cannot resolve host ...

 

i use it only as privoxy vpn, no deluge at all, but also no webgui access anymore.

 

Edit, added the Could not determine IP ....

 

Tue Mar 6 23:06:13 2018 Outgoing Control Channel Authentication: Using 256 bit message hash 'SHA256' for HMAC authentication
Tue Mar 6 23:06:13 2018 Incoming Control Channel Authentication: Using 256 bit message hash 'SHA256' for HMAC authentication
Tue Mar 6 23:06:13 2018 RESOLVE: Cannot resolve host address: my.vpn.here.:4000 (Name or service not known)

2018-03-07 06:45:13,392 DEBG 'start-script' stdout output:
Wed Mar 7 06:45:13 2018 RESOLVE: Cannot resolve host address: montreal.hide.me.:4000 (Name or service not known)

2018-03-07 06:45:13,392 DEBG 'start-script' stdout output:
Wed Mar 7 06:45:13 2018 RESOLVE: Cannot resolve host address: my.vpn.here.:4000 (Name or service not known)
Wed Mar 7 06:45:13 2018 Could not determine IPv4/IPv6 protocol

Edited by alturismo
Link to comment
13 hours ago, alturismo said:

may i ask if theres a way to return to a previous version, since update today all i get in log is

 

i tries different VPN AP but always the same .. and it just worked before the update ;) now cannot resolve host ...

 

i use it only as privoxy vpn, no deluge at all, but also no webgui access anymore.

 

Edit, added the Could not determine IP ....

 

Tue Mar 6 23:06:13 2018 Outgoing Control Channel Authentication: Using 256 bit message hash 'SHA256' for HMAC authentication
Tue Mar 6 23:06:13 2018 Incoming Control Channel Authentication: Using 256 bit message hash 'SHA256' for HMAC authentication
Tue Mar 6 23:06:13 2018 RESOLVE: Cannot resolve host address: my.vpn.here.:4000 (Name or service not known)

2018-03-07 06:45:13,392 DEBG 'start-script' stdout output:
Wed Mar 7 06:45:13 2018 RESOLVE: Cannot resolve host address: montreal.hide.me.:4000 (Name or service not known)

2018-03-07 06:45:13,392 DEBG 'start-script' stdout output:
Wed Mar 7 06:45:13 2018 RESOLVE: Cannot resolve host address: my.vpn.here.:4000 (Name or service not known)
Wed Mar 7 06:45:13 2018 Could not determine IPv4/IPv6 protocol

 

i would like to see some more detailed logs for this, please do the following:-

 

 

Link to comment

Hello,

 

I am also having VPN issues since the update last night.  It was working great prior to the upgrade. I also tried my ovpn file on my phone and it connects just fine...

 


Wed Mar 7 08:20:52 2018 OpenVPN 2.4.4 x86_64-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Sep 26 2017
Wed Mar 7 08:20:52 2018 library versions: OpenSSL 1.1.0f 25 May 2017, LZO 2.10

2018-03-07 08:20:57,850 DEBG 'start-script' stdout output:
Wed Mar 7 08:20:57 2018 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2018-03-07 08:20:57,850 DEBG 'start-script' stdout output:
Wed Mar 7 08:20:57 2018 RESOLVE: Cannot resolve host address: gw1.den1.vitalng.com.:443 (Name or service not known)

2018-03-07 08:20:57,850 DEBG 'start-script' stdout output:
Wed Mar 7 08:20:57 2018 RESOLVE: Cannot resolve host address: gw1.den1.vitalng.com.:443 (Name or service not known)
Wed Mar 7 08:20:57 2018 Could not determine IPv4/IPv6 protocol
Wed Mar 7 08:20:57 2018 SIGHUP[soft,init_instance] received, process restarting

2018-03-07 08:20:57,851 DEBG 'start-script' stdout output:
Wed Mar 7 08:20:57 2018 WARNING: file 'credentials.conf' is group or others accessible

 

Link to comment
16 minutes ago, dr_jared88 said:

Hello,

 

I am also having VPN issues since the update last night.  It was working great prior to the upgrade. I also tried my ovpn file on my phone and it connects just fine...

 



Wed Mar 7 08:20:52 2018 OpenVPN 2.4.4 x86_64-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Sep 26 2017
Wed Mar 7 08:20:52 2018 library versions: OpenSSL 1.1.0f 25 May 2017, LZO 2.10

2018-03-07 08:20:57,850 DEBG 'start-script' stdout output:
Wed Mar 7 08:20:57 2018 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2018-03-07 08:20:57,850 DEBG 'start-script' stdout output:
Wed Mar 7 08:20:57 2018 RESOLVE: Cannot resolve host address: gw1.den1.vitalng.com.:443 (Name or service not known)

2018-03-07 08:20:57,850 DEBG 'start-script' stdout output:
Wed Mar 7 08:20:57 2018 RESOLVE: Cannot resolve host address: gw1.den1.vitalng.com.:443 (Name or service not known)
Wed Mar 7 08:20:57 2018 Could not determine IPv4/IPv6 protocol
Wed Mar 7 08:20:57 2018 SIGHUP[soft,init_instance] received, process restarting

2018-03-07 08:20:57,851 DEBG 'start-script' stdout output:
Wed Mar 7 08:20:57 2018 WARNING: file 'credentials.conf' is group or others accessible

 

 

same deal, i need to see the full log, please follow the procedure in my previous post.

Link to comment

hello everyone. got a little question here. i am having a little issue with this container.  i have noticed that recently when i update the container. it downloads the update then it deletes my container but it doesn't remove the appdata and configuration files. so i have to redownload the container from the app (store) tab. and point it at the locations again.  is this a known issue lately or what do you think is going wrong on my end.  any help would be great

Link to comment
6 hours ago, pe4nut1989 said:

hello everyone. got a little question here. i am having a little issue with this container.  i have noticed that recently when i update the container. it downloads the update then it deletes my container but it doesn't remove the appdata and configuration files. so i have to redownload the container from the app (store) tab. and point it at the locations again.  is this a known issue lately or what do you think is going wrong on my end.  any help would be great

Removing a container never removes the appdata, and nobody would want it to, since that would lose anything they had before when they reinstall.

 

And if you want to reinstall with the same settings, you should go to Community Applications - Previous Apps. That will bring it up with all the same settings as before and no need to point it at the locations again.

Link to comment
10 hours ago, pe4nut1989 said:

hello everyone. got a little question here. i am having a little issue with this container.  i have noticed that recently when i update the container. it downloads the update then it deletes my container but it doesn't remove the appdata and configuration files. so i have to redownload the container from the app (store) tab. and point it at the locations again.  is this a known issue lately or what do you think is going wrong on my end.  any help would be great

It sounds like you have the Advanced Buttons plugin installed.  Uninstall it.  Its incompatible with 6.4.1+

Link to comment
18 hours ago, Squid said:

It sounds like you have the Advanced Buttons plugin installed.  Uninstall it.  Its incompatible with 6.4.1+

 

yes that seems to be the issue . i remember seeing that issue in common fixes plugin and i thought i removed it apparently i didn't. so thank you that fixed my problem  never would have thought of that

Link to comment
22 hours ago, trurl said:

Removing a container never removes the appdata, and nobody would want it to, since that would lose anything they had before when they reinstall.

 

And if you want to reinstall with the same settings, you should go to Community Applications - Previous Apps. That will bring it up with all the same settings as before and no need to point it at the locations again.

yes i know what happens when the appdata is removed  i was just having trouble with why  when the container updated it would remove the install of the container but Squid got me set straight on that part. just a little oversite on my part there. but thank you i didn't know about/or clued into  the previous apps section of the community section  thank you for that could be helpful in the future

Link to comment

Hey,

I have been trying to google and solve my own problems before bugging anybody here as much as I can and i have gotten to the point where my container is 'working' but performance is complete trash, 25 KiB/s and i simply don't understand why.

I am running docker in windows, I have created the container in windows, and poked around at it in Kitematic.

what useful information can I share to try to figure out why my speeds are awful? sorry i don't even know where to start on this

Link to comment
1 minute ago, ozzyc said:

Hey,

I have been trying to google and solve my own problems before bugging anybody here as much as I can and i have gotten to the point where my container is 'working' but performance is complete trash, 25 KiB/s and i simply don't understand why.

I am running docker in windows, I have created the container in windows, and poked around at it in Kitematic.

what useful information can I share to try to figure out why my speeds are awful? sorry i don't even know where to start on this

Looks like google has led you to a forum where we don't run docker on Windows. This is the unRAID forum. I don't know if anyone here can help you or not.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.