Jump to content
binhex

[Support] binhex - DelugeVPN

3923 posts in this topic Last Reply

Recommended Posts

51 minutes ago, nodeadlykittens said:
1 hour ago, binhex said:

have you set the folders correctly to reference /data in the deluge web ui?

I have not, I wanted to keep it neat and keep it under my "download" folder.

I take that to mean you removed the default mapping of /data, and added one for /download on the "app" side of the docker template volume mappings?

Share this post


Link to post
1 hour ago, jonathanm said:

I take that to mean you removed the default mapping of /data, and added one for /download on the "app" side of the docker template volume mappings?

 

Exactly, I substituted "/mnt/cache/appdata/data" with a download share and changed the corresponding values in Deluge webgui. However much as I like my idea of neat, I prefer working which is what it is doing after restoring things to default.

Share this post


Link to post
9 hours ago, binhex said:

 

the tun module is a kernel module that you need to have loaded in order for this container to create the virtual tun device used to connect to the vpn tunnel, im assuming you've tried whats suggested in the log right?:-


insmod /lib/modules/tun.ko

what os is your host running? im assuming its not unraid, as this module is already present on unraid.

 

edit - you need to work on your google-fu :-) https://en.wikipedia.org/wiki/TUN/TAP

 

I'm running an "Unraid Server Basic" (funny because I've purchased a licence, I'd expect it not to be basic now.)

I've not tried that command before as it was pre-fixed with [synology users] - I've tried it now, but


>insmod /lib/modules/tun.ko
>insmod: ERROR: could not load module /lib/modules/tun.ko: No such file or directory

 

I'll have a looksie at the wiki you've posted, I hope I'll be able to figure out something.  Thanks!

Share this post


Link to post
On 3/14/2017 at 5:06 AM, mr-hexen said:

 

You need the .crt file too, which you can only obtain from their website..

I use airVPN and have never used a .crt file only the ovpn file you download.

 

I found I had to copy the file in terminal so it would actually copy the ovpn file.

Share this post


Link to post
7 hours ago, ysu said:

 

I'm running an "Unraid Server Basic" (funny because I've purchased a licence, I'd expect it not to be basic now.)

I've not tried that command before as it was pre-fixed with [synology users] - I've tried it now, but


>insmod /lib/modules/tun.ko
>insmod: ERROR: could not load module /lib/modules/tun.ko: No such file or directory

 

I'll have a looksie at the wiki you've posted, I hope I'll be able to figure out something.  Thanks!

 

Hm...I've looked, and I'm lost.  If you have some insight on this one, please help.

Share this post


Link to post

@drkelly@bellsouth.net I think I may also have a similar issue to you. The VPN connects fine and the Web UI launches but none of my torrents connect, when I get in the container I'm not able to ping anywhere outbound but when I connect to the same VPN on my Mac it works fine.

 

 

Share this post


Link to post

One more issue and then I'm set. It's been running just fine, but suddenly I can't get past the login screen. If I switch the VPN to off, I can log in just fine. But when I turn it back on, I either get a super slow load or I'm unable to get past the login screen. 

 

 

Share this post


Link to post

Hello, when  connect to my server remotely through openvp (using peter_sm's openvpn TUN server plugin), I can't access the webui of this DelugeVPN. Is it possible to both be using the openvpn server hosted on my machine and access DelugeVPN?.

Share this post


Link to post
1 hour ago, naturalcarr said:

Hello, when  connect to my server remotely through openvp (using peter_sm's openvpn TUN server plugin), I can't access the webui of this DelugeVPN. Is it possible to both be using the openvpn server hosted on my machine and access DelugeVPN?.

 

I don't use the plugin, but I use the OpenVPN docker.  And if I am outside my network and connect via VPN to the server, I have no issues accessing the DelugeVPN webgui.

 

Share this post


Link to post

Anyone know of a fix for the webui loading but not letting me past the login screen? AirVPN shows that I'm connected and my trackers are showing that I'm seeding. It's just locked me out of of the webui, even after entering the correct password. Works without a hitch if I disable the VPN. 

 

 

Share this post


Link to post

Everything was peachy with my delugevpn and then I tried to change the port from 8112 to 8113 and ended up messing up WebGUI access. Upon changing the port the docker immediately disappeared from my docker containers page. I tried a couple things then hit advanced and removed the orphaned docker. I tried to reinstall using the "my-delugevpn" template. I tried going to the WebGUI and it wouldn't load. I just immediately goes to a "This page can't be reached". I tried removing and reinstalling, this time using the "binhex-delugevpn" template. Same problem. I tried changing the port and accessing using that port. No luck. I tried killing and removing all docker containers from the command line and then re-added each. ALL work after being re-added except delugevpn. It seems that the 8112 is lockedup or something from the original installation? Oh this could be 100% unrelated but I considered switching to rtorrentvpn since I couldn't get deluge working. I tried installing and accessing the WebGUI. Wouldn't work. Again though, all 5 of my other dockers' WebGUI's are loading no problem. Please help. Thanks!

Share this post


Link to post
On 16/03/2017 at 5:35 AM, ysu said:

 

Hm...I've looked, and I'm lost.  If you have some insight on this one, please help.

 

ok can you please attach the full /config/supervisord.log file here, make sure to remove any username's and passwords.

Share this post


Link to post
On 17/03/2017 at 0:13 AM, drogg said:

One more issue and then I'm set. It's been running just fine, but suddenly I can't get past the login screen. If I switch the VPN to off, I can log in just fine. But when I turn it back on, I either get a super slow load or I'm unable to get past the login screen. 

 

 

 

im afraid im at a loss as to what is going on here!, are you saying the password changes for the webui based on whether the vpn is enabled or not? or do you mean you cant access the webui at all when the vpn is enabled (as in 404 when you attempt to access the webui)?.

Share this post


Link to post
On 16/03/2017 at 8:47 PM, FRiZZLEuK said:

@drkelly@bellsouth.net I think I may also have a similar issue to you. The VPN connects fine and the Web UI launches but none of my torrents connect, when I get in the container I'm not able to ping anywhere outbound but when I connect to the same VPN on my Mac it works fine.

 

 

 

what vpn provider are you with?, if its not PIA then you will need to setup a port forward manually, if it is PIA then you need to ensure the endpoint your connected to allows port forwarding, also check the paths are correctly defined in the deluge webui, you should be pointing at /data for incomplete/completed

Share this post


Link to post
On 18/03/2017 at 0:54 PM, mysteriouscrag said:

Everything was peachy with my delugevpn and then I tried to change the port from 8112 to 8113 and ended up messing up WebGUI access. Upon changing the port the docker immediately disappeared from my docker containers page. I tried a couple things then hit advanced and removed the orphaned docker. I tried to reinstall using the "my-delugevpn" template. I tried going to the WebGUI and it wouldn't load. I just immediately goes to a "This page can't be reached". I tried removing and reinstalling, this time using the "binhex-delugevpn" template. Same problem. I tried changing the port and accessing using that port. No luck. I tried killing and removing all docker containers from the command line and then re-added each. ALL work after being re-added except delugevpn. It seems that the 8112 is lockedup or something from the original installation? Oh this could be 100% unrelated but I considered switching to rtorrentvpn since I couldn't get deluge working. I tried installing and accessing the WebGUI. Wouldn't work. Again though, all 5 of my other dockers' WebGUI's are loading no problem. Please help. Thanks!

 

OK let's start with the log, please post the log found in /config/supervisord.log make sure to remove all ref to username and password.

Share this post


Link to post
2 hours ago, binhex said:

 

OK let's start with the log, please post the log found in /config/supervisord.log make sure to remove all ref to username and password.

 

Okay, I figured it out. I noticed that I could get to the WebUI if I turned off "Enable VPN" in the container settings. That finally gave me the idea to compare it to my SabnzbdVPN settings and I noticed that my PIA username in SabnzbdVPN was different than the one in DelugeVPN. I had the wrong PIA username/password pair. So stupid. Thanks for your help and thanks for the dockers!

Share this post


Link to post
3 hours ago, binhex said:

 

ok can you please attach the full /config/supervisord.log file here, make sure to remove any username's and passwords.

Attached.  Thanks for looking at it!

supervisord.log

Share this post


Link to post
4 minutes ago, ysu said:

Attached.  Thanks for looking at it!

supervisord.log

ok first issue is your lan_network value, is wrong, taken from the log:-

LAN_NETWORK defined as '10.0.0.10/24'

click on the link in my sig to vpn faq, there is a question in there with examples as to how to identify this correctly.

 

Share this post


Link to post

After an automatic update, I lost everything in my Deluge docker. It looks like a fresh install now. Can I recover it somehow? Also how would I make backups?

 

This is how /config looks like:

3bc185ac232fc6c073cc6876b2ceacc3.png

My torrents, openvpn profile and plugins are still there, so I guess it's possible to recover it somehow?

I looked inside core.conf and core.conf~ and neither has my settings.

 

Thanks

Edited by vmunich

Share this post


Link to post
8 hours ago, binhex said:

ok first issue is your lan_network value, is wrong, taken from the log:-


LAN_NETWORK defined as '10.0.0.10/24'

click on the link in my sig to vpn faq, there is a question in there with examples as to how to identify this correctly.

 

Thanks. 

 

My netmask is 255.255.255.0, so now the lan_network is 10.0.0.0/24.

However, I still can't connect to deluge on the server after restarting it.

 

Here is the current supervisord.log attached, please have a look if you can find any other stupid mistakes.  I went through it but to my untrained eye it looks ok.

 

Edit: hm...in my ifconfig this is what I'm getting.  Is this normal / correct?  (i.e. the docker seems to be on a different network)

 

ifconfig
docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 0.0.0.0
        ....

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.0.10  netmask 255.255.255.0  broadcast 0.0.0.0

...

 

 

 

supervisord.log

Edited by ysu

Share this post


Link to post
11 hours ago, binhex said:

 

im afraid im at a loss as to what is going on here!, are you saying the password changes for the webui based on whether the vpn is enabled or not? or do you mean you cant access the webui at all when the vpn is enabled (as in 404 when you attempt to access the webui)?.

 

The latter. The webui just completely fails to load when the VPN is enabled. Things are still downloading/seeding just fine and AirVPN shows me as connected but I can't access the webui unless I disable the VPN. 

Share this post


Link to post
12 hours ago, ysu said:

Thanks. 

 

My netmask is 255.255.255.0, so now the lan_network is 10.0.0.0/24.

However, I still can't connect to deluge on the server after restarting it.

 

Here is the current supervisord.log attached, please have a look if you can find any other stupid mistakes.  I went through it but to my untrained eye it looks ok.

 

Edit: hm...in my ifconfig this is what I'm getting.  Is this normal / correct?  (i.e. the docker seems to be on a different network)

 

ifconfig
docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 0.0.0.0
        ....

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.0.10  netmask 255.255.255.0  broadcast 0.0.0.0

...

 

 

 

supervisord.log

 

the above for docker0 and eth0 is absolutely normal, ok lets turn up the logging, can you please set env var DEBUG value to "true", and then repost the log.

Share this post


Link to post
12 hours ago, drogg said:

 

The latter. The webui just completely fails to load when the VPN is enabled. Things are still downloading/seeding just fine and AirVPN shows me as connected but I can't access the webui unless I disable the VPN. 

 

Are you attempting to connect to the webui from inside of your LAN or outside? i.e. over the internet, please also post your supervisord.log file

Share this post


Link to post
On 3/21/2017 at 6:34 AM, binhex said:

 

Are you attempting to connect to the webui from inside of your LAN or outside? i.e. over the internet, please also post your supervisord.log file

 

Inside the LAN currently. Supervisord.log attached (I assume you want the whole thing?)

 

 

 

Edited by drogg

Share this post


Link to post
22 minutes ago, drogg said:

 

Inside the LAN currently. Supervisord.log attached (I assume you want the whole thing?)

 

 

supervisord.log

 

ok so just to be sure, your attempting to connect to the web ui using an internal ip though right?, not attempting to access the web ui using your external static ip from inside your lan?.

 

also just to confirm your lan network is 192.168.1.x right?

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now