demon1 0 Posted November 7, 2018 Share Posted November 7, 2018 Hi, Not sure if this is the exact correct place for this question. I have delugevpn set up an working fine. However i have recently invested in a new router that has a greater funcionality over the one from the ISP. This one allows me to set a vpn at the router level, I just wanted to know those this have any effect on the delugevpn. Quote Link to post
Lien1454 2 Posted November 7, 2018 Share Posted November 7, 2018 17 hours ago, craigr said: binhex, thanks for this docker. I’ve been fighting trying to get DD-WRT, PIA, and ports open for two years on and off. Got it all done in less than a day with your docker. I love the way you pull the PIA open ports automatically. Fantastic, craigr Does AceVPN thats pre configured also open ports as well? Quote Link to post
zyurph 0 Posted November 7, 2018 Share Posted November 7, 2018 I have a familiar problem of webui stopped working. I have been using it for more than a year before this happened. I have removed the docker image and deleted the deluge vpn folder on unraid the reinstalled and still no dice. I have confirmed it works with out vpn enabled and it works. I have tried many different endpoints and with strict port forward disabled with no luck. Log attached. supervisord.log Quote Link to post
craigr 22 Posted November 8, 2018 Share Posted November 8, 2018 8 hours ago, demon1 said: Hi, Not sure if this is the exact correct place for this question. I have delugevpn set up an working fine. However i have recently invested in a new router that has a greater funcionality over the one from the ISP. This one allows me to set a vpn at the router level, I just wanted to know those this have any effect on the delugevpn. It depends how you setup the VPN on the router. You probably have an option for excluding or including specific IP addresses. Like with “policy based routing” any IP you put in will go through the router VPN and all others will not. craigr Quote Link to post
InVisibleGoD 0 Posted November 9, 2018 Share Posted November 9, 2018 Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2018-11-09 13:21:14.853540 [info] System information Linux 9233a1c1b634 4.18.17-unRAID #1 SMP Sun Nov 4 08:16:44 PST 2018 x86_64 GNU/Linux 2018-11-09 13:21:14.872285 [info] PUID defined as '99' 2018-11-09 13:21:14.919718 [info] PGID defined as '100' 2018-11-09 13:21:14.998615 [info] UMASK defined as '000' 2018-11-09 13:21:15.026538 [info] Permissions already set for volume mappings 2018-11-09 13:21:15.057911 [info] VPN_ENABLED defined as 'yes' 2018-11-09 13:21:15.082599 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/Sweden.ovpn dos2unix: converting file /config/openvpn/Sweden.ovpn to Unix format... 2018-11-09 13:21:15.106000 [info] VPN remote line defined as 'remote sweden.privateinternetaccess.com 1198' 2018-11-09 13:21:15.122283 [info] VPN_REMOTE defined as 'sweden.privateinternetaccess.com' 2018-11-09 13:21:15.139006 [info] VPN_PORT defined as '1198' 2018-11-09 13:21:15.156592 [info] VPN_PROTOCOL defined as 'udp' 2018-11-09 13:21:15.172644 [info] VPN_DEVICE_TYPE defined as 'tun0' 2018-11-09 13:21:15.188762 [info] VPN_PROV defined as 'pia' 2018-11-09 13:21:15.204683 [info] LAN_NETWORK defined as '192.168.1.0/24' 2018-11-09 13:21:15.220664 [info] NAME_SERVERS defined as '209.222.18.222,37.235.1.174,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4' 2018-11-09 13:21:15.236677 [info] VPN_USER defined as 'xxx' 2018-11-09 13:21:15.252713 [info] VPN_PASS defined as 'xxx' 2018-11-09 13:21:15.268746 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS) 2018-11-09 13:21:15.284767 [info] STRICT_PORT_FORWARD defined as 'yes' 2018-11-09 13:21:15.301028 [info] ENABLE_PRIVOXY defined as 'yes' 2018-11-09 13:21:15.318373 [info] Starting Supervisor... 2018-11-09 13:21:15,540 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing 2018-11-09 13:21:15,540 INFO Set uid to user 0 succeeded 2018-11-09 13:21:15,541 INFO supervisord started with pid 8 2018-11-09 13:21:16,544 INFO spawned: 'start-script' with pid 143 2018-11-09 13:21:16,547 INFO spawned: 'deluge-script' with pid 144 2018-11-09 13:21:16,551 INFO spawned: 'deluge-web-script' with pid 145 2018-11-09 13:21:16,555 INFO spawned: 'privoxy-script' with pid 146 2018-11-09 13:21:16,555 INFO reaped unknown pid 9 2018-11-09 13:21:16,557 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN [debug] Environment variables defined as follows BASH=/bin/bash BASHOPTS=cmdhist:complete_fullquote:extquote:force_fignore:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="0") BASH_SOURCE=([0]="/root/start.sh") BASH_VERSINFO=([0]="4" [1]="4" [2]="23" [3]="1" [4]="release" [5]="x86_64-unknown-linux-gnu") BASH_VERSION='4.4.23(1)-release' DEBUG=true DIRSTACK=() ENABLE_PRIVOXY=yes EUID=0 GROUPS=() HOME=/home/nobody HOSTNAME=9233a1c1b634 HOSTTYPE=x86_64 HOST_OS=Unraid IFS=$' \t\n' LANG=en_GB.UTF-8 LAN_NETWORK=192.168.1.0/24 MACHTYPE=x86_64-unknown-linux-gnu NAME_SERVERS=209.222.18.222,37.235.1.174,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4 OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin PGID=100 PIPESTATUS=([0]="0") PPID=8 PS4='+ ' PUID=99 PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:hashall:interactive-comments SHLVL=1 STRICT_PORT_FORWARD=yes SUPERVISOR_ENABLED=1 SUPERVISOR_GROUP_NAME=start-script SUPERVISOR_PROCESS_NAME=start-script TERM=xterm TZ=Europe/London UID=0 UMASK=000 VPN_CONFIG=/config/openvpn/Sweden.ovpn VPN_DEVICE_TYPE=tun0 VPN_ENABLED=yes VPN_OPTIONS= VPN_PASS=cDA7cpSdEw VPN_PORT=1198 VPN_PROTOCOL=udp VPN_PROV=pia VPN_REMOTE=sweden.privateinternetaccess.com VPN_USER=p1657392 _='[debug] Environment variables defined as follows' 2018-11-09 13:21:16,557 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-09 13:21:16,557 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-09 13:21:16,557 INFO success: deluge-web-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-09 13:21:16,557 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-09 13:21:16,557 DEBG 'start-script' stdout output: [debug] Directory listing of files in /config/openvpn as follows 2018-11-09 13:21:16,558 DEBG 'deluge-script' stdout output: [info] Deluge config file already exists, skipping copy 2018-11-09 13:21:16,559 DEBG 'deluge-script' stdout output: [info] VPN is enabled, checking VPN tunnel local ip is valid 2018-11-09 13:21:16,559 DEBG 'privoxy-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2018-11-09 13:21:16,559 DEBG 'deluge-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2018-11-09 13:21:16,562 DEBG 'start-script' stdout output: total 16 drwxrwxr-x 1 nobody users 116 Nov 9 13:21 . drwxrwxr-x 1 nobody users 618 Nov 9 13:17 .. -rwxrwxr-x 1 nobody users 2025 Aug 13 20:06 ca.rsa.2048.crt -rwxrwxr-x 1 nobody users 20 Nov 9 13:17 credentials.conf -rwxrwxr-x 1 nobody users 869 Aug 13 20:06 crl.rsa.2048.pem -rwxrwxr-x 1 nobody users 3169 Nov 9 13:21 Sweden.ovpn 2018-11-09 13:21:16,580 DEBG 'start-script' stdout output: [debug] Contents of ovpn file /config/openvpn/Sweden.ovpn as follows... 2018-11-09 13:21:16,580 DEBG 'start-script' stdout output: remote sweden.privateinternetaccess.com 1198 client dev tun proto udp resolv-retry infinite nobind persist-key cipher aes-128-cbc auth sha1 tls-client remote-cert-tls server auth-user-pass credentials.conf compress verb 1 <crl-verify> -----BEGIN X509 CRL----- deleted -----END X509 CRL----- </crl-verify> <ca> -----BEGIN CERTIFICATE----- deleted -----END CERTIFICATE----- </ca> disable-occ 2018-11-09 13:21:16,586 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2018-11-09 13:21:16,588 DEBG 'start-script' stdout output: [info] Adding 209.222.18.222 to /etc/resolv.conf 2018-11-09 13:21:16,589 DEBG 'start-script' stdout output: [info] Adding 37.235.1.174 to /etc/resolv.conf 2018-11-09 13:21:16,591 DEBG 'start-script' stdout output: [info] Adding 1.1.1.1 to /etc/resolv.conf 2018-11-09 13:21:16,593 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2018-11-09 13:21:16,595 DEBG 'start-script' stdout output: [info] Adding 209.222.18.218 to /etc/resolv.conf 2018-11-09 13:21:16,597 DEBG 'start-script' stdout output: [info] Adding 37.235.1.177 to /etc/resolv.conf 2018-11-09 13:21:16,598 DEBG 'start-script' stdout output: [info] Adding 1.0.0.1 to /etc/resolv.conf 2018-11-09 13:21:16,600 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2018-11-09 13:23:16,713 DEBG 'start-script' stderr output: Error: error sending query: Could not send or receive, because of network error 2018-11-09 13:23:16,717 DEBG 'start-script' stdout output: [crit] sweden.privateinternetaccess.com cannot be resolved, possible DNS issues 2018-11-09 13:23:16,718 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22442314683384 for <Subprocess at 22442314683888 with name start-script in state RUNNING> (stdout)> 2018-11-09 13:23:16,718 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22442314685400 for <Subprocess at 22442314683888 with name start-script in state RUNNING> (stderr)> 2018-11-09 13:23:16,718 INFO exited: start-script (exit status 1; not expected) 2018-11-09 13:23:16,719 DEBG received SIGCLD indicating a child quit 2018-11-09 13:23:37,107 WARN received SIGTERM indicating exit request 2018-11-09 13:23:37,107 DEBG killing privoxy-script (pid 146) with signal SIGTERM 2018-11-09 13:23:37,107 INFO waiting for deluge-script, deluge-web-script, privoxy-script to die 2018-11-09 13:23:37,107 DEBG fd 26 closed, stopped monitoring <POutputDispatcher at 22442314667576 for <Subprocess at 22442314684320 with name privoxy-script in state STOPPING> (stderr)> 2018-11-09 13:23:37,107 DEBG fd 22 closed, stopped monitoring <POutputDispatcher at 22442314669952 for <Subprocess at 22442314684320 with name privoxy-script in state STOPPING> (stdout)> 2018-11-09 13:23:37,107 INFO stopped: privoxy-script (terminated by SIGTERM) 2018-11-09 13:23:37,107 DEBG received SIGCLD indicating a child quit 2018-11-09 13:23:37,107 DEBG killing deluge-web-script (pid 145) with signal SIGTERM 2018-11-09 13:23:37,107 DEBG fd 17 closed, stopped monitoring <POutputDispatcher at 22442314653136 for <Subprocess at 22442314685256 with name deluge-web-script in state STOPPING> (stdout)> 2018-11-09 13:23:37,108 DEBG fd 21 closed, stopped monitoring <POutputDispatcher at 22442314651984 for <Subprocess at 22442314685256 with name deluge-web-script in state STOPPING> (stderr)> 2018-11-09 13:23:37,108 INFO stopped: deluge-web-script (terminated by SIGTERM) 2018-11-09 13:23:37,108 DEBG received SIGCLD indicating a child quit 2018-11-09 13:23:37,108 DEBG killing deluge-script (pid 144) with signal SIGTERM 2018-11-09 13:23:37,108 DEBG fd 16 closed, stopped monitoring <POutputDispatcher at 22442314396520 for <Subprocess at 22442314683312 with name deluge-script in state STOPPING> (stderr)> 2018-11-09 13:23:37,108 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 22442314396448 for <Subprocess at 22442314683312 with name deluge-script in state STOPPING> (stdout)> 2018-11-09 13:23:37,108 INFO stopped: deluge-script (terminated by SIGTERM) 2018-11-09 13:23:37,108 DEBG received SIGCLD indicating a child quit I started having DNS issues a few weeks ago as shown in the log! I already re-created the container but didn't solve! Any ideas? Quote Link to post
Scythe 1 Posted November 12, 2018 Share Posted November 12, 2018 Been trying to use DelugeVPN for the first time on my Unraid box but I'm running into issues. Upon first trying to load the container I kept getting the error: Options error: --status fails with '/tmp/openvpn/openvpn-status.log': No such file or directory (errno=2) Options error: Please correct these errors. I resolved this by jumping in via terminal and manually creating the above log file. Now it appears like the launch sequence completes successfully but I can't seem to access the web UI. Here's my supervisor log for the launch after creating the openvpn-status.log file. Quote Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/https://hub.docker.com/u/binhex/ 2018-11-12 18:29:27.491456 [info] System information Linux 3706c4780663 4.18.17-unRAID #1 SMP Sun Nov 4 08:16:44 PST 2018 x86_64 GNU/Linux 2018-11-12 18:29:27.586065 [info] PUID defined as '99' 2018-11-12 18:29:27.685194 [info] PGID defined as '100' 2018-11-12 18:29:28.039564 [info] UMASK defined as '000' 2018-11-12 18:29:28.129988 [info] Permissions already set for volume mappings 2018-11-12 18:29:28.233343 [info] VPN_ENABLED defined as 'yes' 2018-11-12 18:29:28.345662 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/TGAU.ovpn dos2unix: converting file /config/openvpn/TGAU.ovpn to Unix format... 2018-11-12 18:29:28.511213 [info] VPN remote line defined as 'remote au.torguardvpnaccess.com 1912' 2018-11-12 18:29:28.613159 [info] VPN_REMOTE defined as 'au.torguardvpnaccess.com' 2018-11-12 18:29:28.720695 [info] VPN_PORT defined as '1912' 2018-11-12 18:29:28.844708 [info] VPN_PROTOCOL defined as 'udp' 2018-11-12 18:29:28.944403 [info] VPN_DEVICE_TYPE defined as 'tun0' 2018-11-12 18:29:29.039136 [info] VPN_PROV defined as 'custom' 2018-11-12 18:29:29.134877 [info] LAN_NETWORK defined as '10.1.1.0/24' 2018-11-12 18:29:29.228093 [info] NAME_SERVERS defined as '209.222.18.222,37.235.1.174,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4' 2018-11-12 18:29:29.322919 [info] VPN_USER defined as 'xxxxxxxxxxxxx' 2018-11-12 18:29:29.419933 [info] VPN_PASS defined as 'xxxxxxxxxxxxxx' 2018-11-12 18:29:29.538548 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS) 2018-11-12 18:29:29.636082 [info] ENABLE_PRIVOXY defined as 'yes' 2018-11-12 18:29:29.738927 [info] Starting Supervisor... 2018-11-12 18:29:30,214 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing 2018-11-12 18:29:30,214 INFO Set uid to user 0 succeeded 2018-11-12 18:29:30,223 INFO supervisord started with pid 8 2018-11-12 18:29:30,214 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing 2018-11-12 18:29:30,214 INFO Set uid to user 0 succeeded 2018-11-12 18:29:30,223 INFO supervisord started with pid 8 2018-11-12 18:29:31,227 INFO spawned: 'start-script' with pid 133 2018-11-12 18:29:31,231 INFO spawned: 'deluge-script' with pid 134 2018-11-12 18:29:31,239 INFO spawned: 'deluge-web-script' with pid 135 2018-11-12 18:29:31,250 INFO spawned: 'privoxy-script' with pid 136 2018-11-12 18:29:31,259 INFO reaped unknown pid 9 2018-11-12 18:29:31,261 DEBG 'deluge-script' stdout output: [info] Deluge config file already exists, skipping copy 2018-11-12 18:29:31,262 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-12 18:29:31,263 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-12 18:29:31,263 INFO success: deluge-web-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-12 18:29:31,264 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-12 18:29:31,278 DEBG 'deluge-script' stdout output: [info] VPN is enabled, checking VPN tunnel local ip is valid 2018-11-12 18:29:31,279 DEBG 'privoxy-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2018-11-12 18:29:31,281 DEBG 'deluge-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2018-11-12 18:29:31,286 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN 2018-11-12 18:29:31,288 DEBG 'start-script' stdout output: [debug] Environment variables defined as follows 2018-11-12 18:29:31,290 DEBG 'start-script' stdout output: BASH=/bin/bash 2018-11-12 18:29:31,292 DEBG 'start-script' stdout output: BASHOPTS=cmdhist:complete_fullquote:extquote:force_fignore:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="0") BASH_SOURCE=([0]="/root/start.sh") BASH_VERSINFO=([0]="4" [1]="4" [2]="23" [3]="1" [4]="release" [5]="x86_64-unknown-linux-gnu") BASH_VERSION='4.4.23(1)-release' DEBUG=true DIRSTACK=() ENABLE_PRIVOXY=yes EUID=0 ) HOME=/home/nobody HOSTNAME=3706c4780663 HOSTTYPE=x86_64 HOST_OS=Unraid IFS=$' \t\n' LANG=en_GB.UTF-8 LAN_NETWORK=10.1.1.0/24 MACHTYPE=x86_64-unknown-linux-gnu NAME_SERVERS=209.222.18.222,37.235.1.174,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4 OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin PGID=100 PIPESTATUS=([0]="0") PPID=8 PS4='+ ' PUID=99 PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:hashall:interactive-comments SHLVL=1 STRICT_PORT_FORWARD=yes SUPERVISOR_ENABLED=1 SUPERVISOR_GROUP_NAME=start-script SUPERVISOR_PROCESS_NAME=start-script TERM=xterm TZ=Australia/Perth UID=0 0 VPN_CONFIG=/config/openvpn/TGAU.ovpn VPN_DEVICE_TYPE=tun0 VPN_ENABLED=yes VPN_OPTIONS= VPN_PASS=xxxxxxxxxxxxx VPN_PORT=1912 VPN_PROTOCOL=udp VPN_PROV=custom VPN_REMOTE=au.torguardvpnaccess.com VPN_USER=xxxxxxxxxxxx _='[debug] Environment variables defined as follows' [debug] Directory listing of files in /config/openvpn as follows 2018-11-12 18:29:31,311 DEBG 'start-script' stdout output: total 8 drwxrwxr-x 1 nobody users 59 Nov 12 18:29 . drwxrwxr-x 1 nobody users 98 Nov 12 18:03 .. -rwxrwxr-x 1 nobody users 32 Nov 12 18:28 credentials.conf -rwxrwxr-x 1 nobody users 2658 Nov 12 18:29 TGAU.ovpn 2018-11-12 18:29:31,505 DEBG 'start-script' stdout output: [debug] Contents of ovpn file /config/openvpn/TGAU.ovpn as follows... 2018-11-12 18:29:31,506 DEBG 'start-script' stdout output: remote au.torguardvpnaccess.com 1912 client dev tun5 p remote-cert-tls server auth SHA256 key-direction 1 setenv CLIENT_CERT 0 <tls-auth> -----BEGIN OpenVPN Static key V1----- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -----END OpenVPN Static key V1----- </tls-auth> resolv-retry infinite nobind tls-version-min 1.2 cipher AES-256-GCM compress ncp-disable tun-mtu-extra 32 <ca> -----BEGIN CERTIFICATE----- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -----END CERTIFICATE----- </ca> auth-user-pass credentials.conf status /tmp/openvpn/openvpn-status.log 2018-11-12 18:29:31,549 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2018-11-12 18:29:31,575 DEBG 'start-script' stdout output: [info] Adding 209.222.18.222 to /etc/resolv.conf 2018-11-12 18:29:31,598 DEBG 'start-script' stdout output: [info] Adding 37.235.1.174 to /etc/resolv.conf 2018-11-12 18:29:31,612 DEBG 'start-script' stdout output: [info] Adding 1.1.1.1 to /etc/resolv.conf 2018-11-12 18:29:31,623 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2018-11-12 18:29:31,634 DEBG 'start-script' stdout output: [info] Adding 209.222.18.218 to /etc/resolv.conf 2018-11-12 18:29:31,646 DEBG 'start-script' stdout output: [info] Adding 37.235.1.177 to /etc/resolv.conf 2018-11-12 18:29:31,655 DEBG 'start-script' stdout output: [info] Adding 1.0.0.1 to /etc/resolv.conf 2018-11-12 18:29:31,668 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2018-11-12 18:29:31,744 DEBG 'start-script' stdout output: [info] Remote VPN endpoint resolves to the following A record(s)... 168.1.210.229 2018-11-12 18:29:31,772 DEBG 'start-script' stdout output: [debug] Show name servers defined for container 2018-11-12 18:29:31,774 DEBG 'start-script' stdout output: nameserver 209.222.18.222 nameserver 37.235.1.174 nameserver 1.1.1.1 nameserver 8.8.8.8 nameserver 209.222.18.218 nameserver 37.235.1.177 nameserver 1.0.0.1 nameserver 8.8.4.4 2018-11-12 18:29:31,775 DEBG 'start-script' stdout output: [debug] Show name resolution for VPN endpoint au.torguardvpnaccess.com 2018-11-12 18:29:32,181 DEBG 'start-script' stdout output: ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 31054 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; au.torguardvpnaccess.com. IN A ;; ANSWER SECTION: au.torguardvpnaccess.com. 30 IN A 168.1.24.85 ;; AUTHORITY SECTION: ;; ADDITIONAL SECTION: ;; Query time: 402 msec ;; SERVER: 37.235.1.174 ;; WHEN: Mon Nov 12 18:29:31 2018 ;; MSG SIZE rcvd: 58 2018-11-12 18:29:32,182 DEBG 'start-script' stdout output: [debug] Show contents of hosts file 2018-11-12 18:29:32,185 DEBG 'start-script' stdout output: 127.0.0.1 localhost ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters 172.17.0.8 3706c4780663 168.1.210.229 au.torguardvpnaccess.com 2018-11-12 18:29:32,201 DEBG 'start-script' stdout output: [info] Adding 10.1.1.0/24 as route via docker eth0 2018-11-12 18:29:32,205 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2018-11-12 18:29:32,209 DEBG 'start-script' stdout output: default via 172.17.0.1 dev eth0 10.1.1.0/24 via 172.17.0.1 dev eth0 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.8 2018-11-12 18:29:32,211 DEBG 'start-script' stdout output: -------------------- [debug] Modules currently loaded for kernel 2018-11-12 18:29:32,216 DEBG 'start-script' stdout output: Module Size Used by xt_nat 16384 16 veth 16384 0 xt_CHECKSUM 16384 1 iptable_mangle 16384 1 ipt_REJECT 16384 2 ebtable_filter 16384 0 ebtables 32768 1 ebtable_filter ip6table_filter 16384 0 ip6_tables 24576 1 ip6table_filter vhost_net 20480 0 vhost 32768 1 vhost_net tap 20480 1 vhost_net ipt_MASQUERADE 16384 20 iptable_nat 16384 1 nf_conntrack_ipv4 16384 39 nf_defrag_ipv4 16384 1 nf_conntrack_ipv4 nf_nat_ipv4 16384 2 ipt_MASQUERADE,iptable_nat iptable_filter 16384 1 ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle nf_nat 24576 2 nf_nat_ipv4,xt_nat xfs 663552 1 md_mod 49152 1 tun 36864 2 vhost_net nct6775 53248 0 hwmon_vid 16384 1 nct6775 bonding 110592 0 intel_powerclamp 16384 0 coretemp 16384 0 kvm_intel 196608 0 kvm 364544 1 kvm_intel crct10dif_pclmul 16384 0 crc32_pclmul 16384 0 crc32c_intel 24576 0 ghash_clmulni_intel 16384 0 pcbc 16384 0 aesni_intel 200704 0 aes_x86_64 20480 1 aesni_intel crypto_simd 16384 1 aesni_intel cryptd 20480 3 crypto_simd,ghash_clmulni_intel,aesni_intel r8169 69632 0 glue_helper 16384 1 aesni_intel mii 16384 1 r8169 iosf_mbi 16384 0 ahci 40960 2 intel_cstate 16384 0 libahci 28672 1 ahci i2c_i801 24576 0 i2c_core 40960 1 i2c_i801 video 40960 0 backlight 16384 1 video pcc_cpufreq 16384 0 acpi_pad 20480 0 button 16384 0 2018-11-12 18:29:32,224 DEBG 'start-script' stdout output: iptable_mangle 16384 1 ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle 2018-11-12 18:29:32,225 DEBG 'start-script' stdout output: [info] iptable_mangle support detected, adding fwmark for tables 2018-11-12 18:29:32,242 DEBG 'start-script' stdout output: [debug] Docker interface defined as eth0 2018-11-12 18:29:32,250 DEBG 'start-script' stdout output: [debug] Docker IP defined as 172.17.0.8 2018-11-12 18:29:32,259 DEBG 'start-script' stdout output: [debug] Docker netmask defined as 255.255.0.0 2018-11-12 18:29:32,291 DEBG 'start-script' stdout output: [info] Docker network defined as 172.17.0.0/16 2018-11-12 18:29:32,486 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2018-11-12 18:29:32,493 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i tun0 -j ACCEPT -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1912 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT -A INPUT -s 10.1.1.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT -A INPUT -s 10.1.1.0/24 -d 172.17.0.0/16 -i eth0 -p tcp -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1912 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT -A OUTPUT -d 10.1.1.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 10.1.1.0/24 -o eth0 -p tcp -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT 2018-11-12 18:29:32,494 DEBG 'start-script' stdout output: -------------------- 2018-11-12 18:29:32,495 DEBG 'start-script' stdout output: [debug] OpenVPN command line:- /usr/bin/openvpn --daemon --reneg-sec 0 --mute-replay-warnings --auth-nocache --setenv VPN_PROV 'custom' --setenv DEBUG 'true' --setenv VPN_DEVICE_TYPE 'tun0' --setenv VPN_REMOTE 'au.torguardvpnaccess.com' --script-security 2 --up /root/openvpnup.sh --up-delay --up-restart --writepid /root/openvpn.pid --remap-usr1 SIGHUP --log-append /dev/stdout --pull-filter ignore 'up' --pull-filter ignore 'down' --pull-filter ignore 'route-ipv6' --pull-filter ignore 'ifconfig-ipv6' --pull-filter ignore 'tun-ipv6' --pull-filter ignore 'persist-tun' --pull-filter ignore 'reneg-sec' --remote 168.1.210.229 1912 udp --remote-random --keepalive 10 60 --auth-user-pass credentials.conf --cd /config/openvpn --config '/config/openvpn/TGAU.ovpn' [info] Starting OpenVPN... 2018-11-12 18:29:32,512 DEBG 'start-script' stdout output: Mon Nov 12 18:29:32 2018 WARNING: file 'credentials.conf' is group or others accessible Mon Nov 12 18:29:32 2018 OpenVPN 2.4.6 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Apr 24 2018 Mon Nov 12 18:29:32 2018 library versions: OpenSSL 1.1.0h 27 Mar 2018, LZO 2.10 2018-11-12 18:29:32,514 DEBG 'start-script' stdout output: Mon Nov 12 18:29:32 2018 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2018-11-12 18:29:32,515 DEBG 'start-script' stdout output: [info] OpenVPN started [debug] Waiting for valid IP address from tunnel... 2018-11-12 18:29:32,517 DEBG 'start-script' stdout output: Mon Nov 12 18:29:32 2018 TCP/UDP: Preserving recently used remote address: [AF_INET]168.1.210.229:1912 2018-11-12 18:29:32,518 DEBG 'start-script' stdout output: Mon Nov 12 18:29:32 2018 UDP link local: (not bound) Mon Nov 12 18:29:32 2018 UDP link remote: [AF_INET]168.1.210.229:1912 2018-11-12 18:29:33,361 DEBG 'start-script' stdout output: Mon Nov 12 18:29:33 2018 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1582', remote='link-mtu 1569' Mon Nov 12 18:29:33 2018 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1532', remote='tun-mtu 1500' Mon Nov 12 18:29:33 2018 WARNING: 'comp-lzo' is present in local config but missing in remote config, local='comp-lzo' Mon Nov 12 18:29:33 2018 WARNING: 'cipher' is used inconsistently, local='cipher AES-256-GCM', remote='cipher AES-128-CBC' Mon Nov 12 18:29:33 2018 WARNING: 'auth' is used inconsistently, local='auth [null-digest]', remote='auth SHA256' Mon Nov 12 18:29:33 2018 WARNING: 'keysize' is used inconsistently, local='keysize 256', remote='keysize 128' Mon Nov 12 18:29:33 2018 [TG-OVPN-CA] Peer Connection Initiated with [AF_INET]168.1.210.229:1912 2018-11-12 18:29:34,464 DEBG 'start-script' stdout output: Mon Nov 12 18:29:34 2018 TUN/TAP device tun5 opened 2018-11-12 18:29:34,466 DEBG 'start-script' stdout output: Mon Nov 12 18:29:34 2018 do_ifconfig, tt->did_ifconfig_ipv6_setup=0 Mon Nov 12 18:29:34 2018 /usr/bin/ip link set dev tun5 up mtu 1500 2018-11-12 18:29:34,479 DEBG 'start-script' stdout output: Mon Nov 12 18:29:34 2018 /usr/bin/ip addr add dev tun5 local 10.35.0.10 peer 10.35.0.9 2018-11-12 18:29:34,485 DEBG 'start-script' stdout output: Mon Nov 12 18:29:34 2018 /root/openvpnup.sh tun5 1500 1585 10.35.0.10 10.35.0.9 init 2018-11-12 18:29:34,495 DEBG 'start-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2018-11-12 18:29:34,498 DEBG 'start-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2018-11-12 18:29:34,517 DEBG 'start-script' stdout output: Mon Nov 12 18:29:34 2018 Initialization Sequence Completed 1 To confirm I'm trying to load the admin UI (10.1.1.142:8112) from a computer within the network (10.1.1.14) and I'm getting a connection refused error. Quote Link to post
zyurph 0 Posted November 12, 2018 Share Posted November 12, 2018 So I have two Unraid servers both running DelugeVPN and both with the same issue. as I mentioned before: On 11/7/2018 at 5:04 PM, zyurph said: I have a familiar problem of webui stopped working. I have been using it for more than a year before this happened. I have removed the docker image and deleted the deluge vpn folder on unraid the reinstalled and still no dice. I have confirmed it works with out vpn enabled and it works. I have tried many different endpoints and with strict port forward disabled with no luck. Log attached. supervisord.log The WebUI is not loading, the difference here is I haven't upgraded unraid and I am still running 6.4 supervisord.log: Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2018-11-12 14:55:12.217141 [info] Host is running unRAID 2018-11-12 14:55:12.247686 [info] System information Linux 61e0a63334e7 4.14.13-unRAID #1 SMP PREEMPT Wed Jan 10 10:27:09 PST 2018 x86_64 GNU/Linux 2018-11-12 14:55:12.289912 [info] PUID defined as '99' 2018-11-12 14:55:12.326920 [info] PGID defined as '100' 2018-11-12 14:55:12.397353 [info] UMASK defined as '000' 2018-11-12 14:55:12.432684 [info] Permissions already set for volume mappings 2018-11-12 14:55:12.472108 [info] VPN_ENABLED defined as 'yes' 2018-11-12 14:55:12.512886 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/CA Toronto.ovpn dos2unix: converting file /config/openvpn/CA Toronto.ovpn to Unix format... 2018-11-12 14:55:12.573468 [info] VPN remote line defined as 'remote ca-toronto.privateinternetaccess.com 1198' 2018-11-12 14:55:12.607314 [info] VPN_REMOTE defined as 'ca-toronto.privateinternetaccess.com' 2018-11-12 14:55:12.641545 [info] VPN_PORT defined as '1198' 2018-11-12 14:55:12.681615 [info] VPN_PROTOCOL defined as 'udp' 2018-11-12 14:55:12.715259 [info] VPN_DEVICE_TYPE defined as 'tun0' 2018-11-12 14:55:12.748385 [info] VPN_PROV defined as 'pia' 2018-11-12 14:55:12.781612 [info] LAN_NETWORK defined as '10.1.1.0/24' 2018-11-12 14:55:12.815185 [info] NAME_SERVERS defined as '209.222.18.222,37.235.1.174,8.8.8.8,209.222.18.218,37.235.1.177,8.8.4.4' 2018-11-12 14:55:12.848619 [info] VPN_USER defined as '******************' 2018-11-12 14:55:12.883130 [info] VPN_PASS defined as '*******************************' 2018-11-12 14:55:12.917235 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS) 2018-11-12 14:55:12.952129 [info] STRICT_PORT_FORWARD defined as 'yes' 2018-11-12 14:55:12.986867 [info] ENABLE_PRIVOXY defined as 'yes' 2018-11-12 14:55:13.020477 [info] Starting Supervisor... 2018-11-12 14:55:13,181 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing 2018-11-12 14:55:13,181 INFO Set uid to user 0 succeeded 2018-11-12 14:55:13,184 INFO supervisord started with pid 7 2018-11-12 14:55:14,186 INFO spawned: 'start-script' with pid 139 2018-11-12 14:55:14,188 INFO spawned: 'deluge-script' with pid 140 2018-11-12 14:55:14,189 INFO spawned: 'deluge-web-script' with pid 141 2018-11-12 14:55:14,191 INFO spawned: 'privoxy-script' with pid 142 2018-11-12 14:55:14,191 INFO reaped unknown pid 8 2018-11-12 14:55:14,194 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN 2018-11-12 14:55:14,194 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-12 14:55:14,195 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-12 14:55:14,195 INFO success: deluge-web-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-12 14:55:14,195 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2018-11-12 14:55:14,195 DEBG 'deluge-script' stdout output: [info] Deluge config file already exists, skipping copy 2018-11-12 14:55:14,197 DEBG 'deluge-script' stdout output: [info] VPN is enabled, checking VPN tunnel local ip is valid 2018-11-12 14:55:14,273 DEBG 'start-script' stdout output: [info] Default route for container is 10.1.1.254 2018-11-12 14:55:14,280 DEBG 'start-script' stdout output: [info] Adding 209.222.18.222 to /etc/resolv.conf 2018-11-12 14:55:14,286 DEBG 'start-script' stdout output: [info] Adding 37.235.1.174 to /etc/resolv.conf 2018-11-12 14:55:14,292 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2018-11-12 14:55:14,296 DEBG 'start-script' stdout output: [info] Adding 209.222.18.218 to /etc/resolv.conf 2018-11-12 14:55:14,300 DEBG 'start-script' stdout output: [info] Adding 37.235.1.177 to /etc/resolv.conf 2018-11-12 14:55:14,304 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2018-11-12 14:55:14,520 DEBG 'start-script' stdout output: [info] Adding 10.1.1.0/24 as route via docker eth0 2018-11-12 14:55:14,521 DEBG 'start-script' stderr output: RTNETLINK answers: File exists 2018-11-12 14:55:14,522 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2018-11-12 14:55:14,522 DEBG 'start-script' stdout output: default via 10.1.1.254 dev eth0 10.1.1.0/24 dev eth0 proto kernel scope link src 10.1.1.14 2018-11-12 14:55:14,523 DEBG 'start-script' stdout output: -------------------- 2018-11-12 14:55:14,526 DEBG 'start-script' stdout output: iptable_mangle 16384 1 ip_tables 24576 3 iptable_mangle,iptable_filter,iptable_nat 2018-11-12 14:55:14,526 DEBG 'start-script' stdout output: [info] iptable_mangle support detected, adding fwmark for tables 2018-11-12 14:55:14,549 DEBG 'start-script' stdout output: [info] Docker network defined as 10.1.1.0/24 2018-11-12 14:55:14,689 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2018-11-12 14:55:14,691 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i tun0 -j ACCEPT -A INPUT -s 10.1.1.0/24 -d 10.1.1.0/24 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT -A INPUT -s 10.1.1.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT -A INPUT -s 10.1.1.0/24 -d 10.1.1.0/24 -i eth0 -p tcp -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT -A OUTPUT -s 10.1.1.0/24 -d 10.1.1.0/24 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT -A OUTPUT -d 10.1.1.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT -A OUTPUT -s 10.1.1.0/24 -d 10.1.1.0/24 -o eth0 -p tcp -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT 2018-11-12 14:55:14,691 DEBG 'start-script' stdout output: -------------------- 2018-11-12 14:55:14,693 DEBG 'start-script' stdout output: [info] Starting OpenVPN... 2018-11-12 14:55:14,702 DEBG 'start-script' stdout output: Mon Nov 12 14:55:14 2018 WARNING: file 'credentials.conf' is group or others accessible Mon Nov 12 14:55:14 2018 OpenVPN 2.4.6 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Apr 24 2018 Mon Nov 12 14:55:14 2018 library versions: OpenSSL 1.1.0h 27 Mar 2018, LZO 2.10 2018-11-12 14:55:14,703 DEBG 'start-script' stdout output: [info] OpenVPN started 2018-11-12 14:55:14,703 DEBG 'start-script' stdout output: Mon Nov 12 14:55:14 2018 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2018-11-12 14:55:14,703 DEBG 'start-script' stdout output: Mon Nov 12 14:55:14 2018 TCP/UDP: Preserving recently used remote address: [AF_INET]172.98.67.59:1198 Mon Nov 12 14:55:14 2018 UDP link local: (not bound) Mon Nov 12 14:55:14 2018 UDP link remote: [AF_INET]172.98.67.59:1198 2018-11-12 14:55:15,309 DEBG 'start-script' stdout output: Mon Nov 12 14:55:15 2018 [68a030da2d6504d0f8ecfa90e2d37ef9] Peer Connection Initiated with [AF_INET]172.98.67.59:1198 2018-11-12 14:55:16,748 DEBG 'start-script' stdout output: Mon Nov 12 14:55:16 2018 auth-token received, disabling auth-nocache for the authentication token 2018-11-12 14:55:16,748 DEBG 'start-script' stdout output: Mon Nov 12 14:55:16 2018 TUN/TAP device tun0 opened 2018-11-12 14:55:16,748 DEBG 'start-script' stdout output: Mon Nov 12 14:55:16 2018 do_ifconfig, tt->did_ifconfig_ipv6_setup=0 Mon Nov 12 14:55:16 2018 /usr/bin/ip link set dev tun0 up mtu 1500 2018-11-12 14:55:16,750 DEBG 'start-script' stdout output: Mon Nov 12 14:55:16 2018 /usr/bin/ip addr add dev tun0 local 10.41.10.6 peer 10.41.10.5 2018-11-12 14:55:16,751 DEBG 'start-script' stdout output: Mon Nov 12 14:55:16 2018 /root/openvpnup.sh tun0 1500 1558 10.41.10.6 10.41.10.5 init 2018-11-12 14:55:16,758 DEBG 'start-script' stdout output: Mon Nov 12 14:55:16 2018 Initialization Sequence Completed 2018-11-12 14:55:16,778 DEBG 'privoxy-script' stdout output: [info] Configuring Privoxy... 2018-11-12 14:55:16,781 DEBG 'deluge-script' stdout output: [info] Deluge not running 2018-11-12 14:55:16,781 DEBG 'deluge-script' stdout output: [info] Deluge listening interface IP 0.0.0.0 and VPN provider IP 10.41.10.6 different, marking for reconfigure 2018-11-12 14:55:16,873 DEBG 'start-script' stdout output: [info] Attempting to curl http://209.222.18.222:2000/?client_id=682e86652ac00990c16b49ba2c92702c148703c477183c67e5cc19207b46af28... 2018-11-12 14:55:17,056 DEBG 'privoxy-script' stdout output: [info] All checks complete, starting Privoxy... 2018-11-12 14:55:17,057 DEBG 'privoxy-script' stderr output: 2018-11-12 14:55:17.057 1460d90e70c0 Info: Privoxy version 3.0.26 2018-11-12 14:55:17.057 1460d90e70c0 Info: Program name: /usr/bin/privoxy 2018-11-12 14:55:17,695 DEBG 'start-script' stdout output: [info] Successfully retrieved external IP address 173.239.230.58 2018-11-12 14:55:18,063 DEBG 'start-script' stdout output: [info] Curl successful for http://209.222.18.222:2000/?client_id=682e86652ac00990c16b49ba2c92702c148703c477183c67e5cc19207b46af28, response code 200 2018-11-12 14:55:18,783 DEBG 'deluge-script' stdout output: [info] Attempting to start Deluge... 2018-11-12 14:55:19,228 DEBG 'deluge-script' stdout output: [info] Deluge listening interface currently defined as 10.12.10.6 [info] Deluge listening interface will be changed to 10.41.10.6 [info] Saving changes to Deluge config file /config/core.conf... 2018-11-12 14:55:19,825 DEBG 'deluge-web-script' stdout output: [info] Starting Deluge webui... 2018-11-12 14:55:20,312 DEBG 'deluge-script' stdout output: Setting random_port to False.. Configuration value successfully updated. 2018-11-12 14:55:20,830 DEBG 'deluge-script' stdout output: Setting listen_ports to (43018, 43018).. Configuration value successfully updated. 2018-11-12 14:55:20,857 DEBG 'deluge-script' stdout output: [info] Deluge started Thoughts anyone? Quote Link to post
scubieman 15 Posted November 12, 2018 Share Posted November 12, 2018 DelugeVPN keeps removing my plugin "simply extractor" and reverting back to "extractor" Quote Link to post
aterfax 9 Posted November 13, 2018 Share Posted November 13, 2018 Binhex, did you change the default /data mount to /media ? I only just noticed this as all my downloads started failing! Quote Link to post
binhex 771 Posted November 13, 2018 Author Share Posted November 13, 2018 2 minutes ago, aterfax said: Binhex, did you change the default /data mount to /media ? I only just noticed this as all my downloads started failing! nope, the template hasn't changed in 7 months (even if it had it wouldnt change your template), and i dont set defaults for any deluge configuration. Quote Link to post
aterfax 9 Posted November 13, 2018 Share Posted November 13, 2018 How odd. I fixed it anyway now. I think I must have customised it and it got re-installed then. Quote Link to post
scubieman 15 Posted November 13, 2018 Share Posted November 13, 2018 DelugeVPN keeps removing my plugin "simply extractor" and reverting back to "extractor"Binflex we're you able to look at this? Sent from my Pixel 2 XL using Tapatalk Quote Link to post
trurl 1516 Posted November 13, 2018 Share Posted November 13, 2018 18 hours ago, scubieman said: DelugeVPN keeps removing my plugin "simply extractor" and reverting back to "extractor" I don't use this docker and haven't use the application either. How is this plugin installed? Typically the only things that persist in a docker is things in appdata since container updates are basically a reinstall. Quote Link to post
scubieman 15 Posted November 13, 2018 Share Posted November 13, 2018 4 minutes ago, trurl said: I don't use this docker and haven't use the application either. How is this plugin installed? Typically the only things that persist in a docker is things in appdata since container updates are basically a reinstall. I had appdata set to cache yes, I switched that to Only. Hope that this helps. Thought something between the drives once getting now transfered right or something Quote Link to post
zyurph 0 Posted November 13, 2018 Share Posted November 13, 2018 If I need to provide more information, please let me know. I have been trying to determine what changed for over a week and I'm unable to figure it out. From my point of view, nothing has changed. Quote Link to post
trurl 1516 Posted November 13, 2018 Share Posted November 13, 2018 1 hour ago, scubieman said: I had appdata set to cache yes, I switched that to Only. Hope that this helps. Thought something between the drives once getting now transfered right or something This doesn't really tell me how you install a deluge plugin. As I said, I don't use it. Also, you should set appdata to cache-prefer not cache-only. See here for more details on how the cache settings work and ask if you need more explanation: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?page=2#comment-537383 Quote Link to post
scubieman 15 Posted November 13, 2018 Share Posted November 13, 2018 17 minutes ago, trurl said: This doesn't really tell me how you install a deluge plugin. As I said, I don't use it. Also, you should set appdata to cache-prefer not cache-only. See here for more details on how the cache settings work and ask if you need more explanation: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?page=2#comment-537383 I switched to cache-prefer since I see its better than cache-only. Here is image of my setup. Quote Link to post
zyurph 0 Posted November 13, 2018 Share Posted November 13, 2018 I went ahead and updated unraid to 6.6.5 which purged all my docker containers and their respective folders in appdata. So I added binhex-delugevpn again and tried all vpn points listed here: https://www.privateinternetaccess.com/helpdesk/kb/articles/how-do-i-enable-port-forwarding-on-my-vpn and none of them allowed me to enter the webui. Quote Link to post
scubieman 15 Posted November 13, 2018 Share Posted November 13, 2018 (edited) 5 minutes ago, zyurph said: I went ahead and updated unraid to 6.6.5 which purged all my docker containers and their respective folders in appdata. So I added binhex-delugevpn again and tried all vpn points listed here: https://www.privateinternetaccess.com/helpdesk/kb/articles/how-do-i-enable-port-forwarding-on-my-vpn and none of them allowed me to enter the webui. Did you enter the PIA configs? Follow this video... Edited November 13, 2018 by scubieman Quote Link to post
zyurph 0 Posted November 13, 2018 Share Posted November 13, 2018 My apologies my more recent reply was a continuation of my previous messages note I have been running binhex-delugevpn for over a year without an issue until recently I have updated to the latest version of both unraid and the binhex-delugevpn docker and no webui. So I now have the same issue on two different unraid servers. Oh and yes I have my PIA creds entered. Attached is my latest supervisord log. supervisord.log Quote Link to post
trurl 1516 Posted November 14, 2018 Share Posted November 14, 2018 21 hours ago, scubieman said: I switched to cache-prefer since I see its better than cache-only. Here is image of my setup. What I was trying to get at earlier about how a deluge plugin is installed. I don't know, am not inclined to research it since I don't use it, and you haven't told me. A docker container is a little OS designed to hold a single application. The question is whether or not the installed plugin resides in Unraid storage (appdata) or resides somewhere else in that little OS. If it isn't in appdata it won't persist since updating the container replaces that little OS. Maybe someone who uses this will be able to help you. Quote Link to post
wgstarks 211 Posted November 14, 2018 Share Posted November 14, 2018 34 minutes ago, trurl said: Maybe someone who uses this will be able to help you. Plugins should be installed in appdata/binhex-delugevpn/plugins/. In the past I’ve had issues with plugin settings reverting to defaults (I believe this is/was a Deluge issue) but never had plugins completely disappear. @scubieman What method did you use to install the plugin? Quote Link to post
scubieman 15 Posted November 14, 2018 Share Posted November 14, 2018 31 minutes ago, wgstarks said: Plugins should be installed in appdata/binhex-delugevpn/plugins/. In the past I’ve had issues with plugin settings reverting to defaults (I believe this is/was a Deluge issue) but never had plugins completely disappear. @scubieman What method did you use to install the plugin? I use the install button then select the plug-in egg. The plugin stays installed. Just goes unchecked and extractor plug-in goes checked. Quote Link to post
wgstarks 211 Posted November 14, 2018 Share Posted November 14, 2018 I’ve seen a few similar complaints in the Deluge forum. Might try starting a thread there. In my case, using the GTK to configure the plugins seems to have helped. I haven’t had any recent problems with plugin settings getting corrupted. Quote Link to post
binhex 771 Posted November 14, 2018 Author Share Posted November 14, 2018 19 minutes ago, scubieman said: I use the install button then select the plug-in egg. The plugin stays installed. Just goes unchecked and extractor plug-in goes checked. ive also seen this issue, i believe its a deluge bug thats been around for quite some time, as i cannot see any permissions related problems with the image and the plugin does install, its just deluge unticks the option, weirdly if you then re-tick it you can end up with multiple installs of the same plugin!. Quote Link to post
7919 posts in this topic Last Reply
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.