Jump to content
binhex

[Support] binhex - DelugeVPN

6101 posts in this topic Last Reply

Recommended Posts

6 minutes ago, SpaceInvaderOne said:

Can you check in deluge preferences/network that you dont have peer exchange or dht enabled

I did have them both checked and unchecking and restarting the docker fixed it! Why do you think those settings were blocking things?

 

Thanks!!

Share this post


Link to post
2 minutes ago, jvorn said:

I did have them both checked and unchecking and restarting the docker fixed it! Why do you think those settings were blocking things?

 

Thanks!!

Ah glad that worked :)

Alot of private trackers don't allow these features as it allows connecting to clients which are not registered with the tracker. 

Share this post


Link to post
3 minutes ago, SpaceInvaderOne said:

Ah glad that worked :)

Alot of private trackers don't allow these features as it allows connecting to clients which are not registered with the tracker. 

Makes sense! I would have never thought to change those, I thought for sure it was a docker config issue since Im new at this... turns out I should have trusted myself more!

Edited by jvorn

Share this post


Link to post

I saw someone else mention windscribe in the last page. Did anyone get it to work? I can download, and it's from my windscribe static ip, verified on a private tracker, but can't seed or upload a linuxiso or on a private tracker. I just set two static ports to forward (35821 & 35822) from windscribe, and set these and incoming and outgoing ranges in deluge, and forwarded in my router to 58946 & 58846. Does this sound correct?

 

I've tested Privoxy and that seems to work as well.

Quote

 


ErrorWarningSystemArrayLogin


Created by...
___. .__ .__
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > <
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2019-01-31 00:42:40.789254 [info] System information Linux cf01771614fa 4.19.17-Unraid #1 SMP Thu Jan 24 13:07:56 PST 2019 x86_64 GNU/Linux
2019-01-31 00:42:40.814859 [info] PUID defined as '99'
2019-01-31 00:42:40.893813 [info] PGID defined as '100'
2019-01-31 00:42:41.021603 [info] UMASK defined as '000'
2019-01-31 00:42:41.044252 [info] Permissions already set for volume mappings
2019-01-31 00:42:41.069867 [info] DELUGE_DAEMON_LOG_LEVEL defined as 'info'
2019-01-31 00:42:41.093260 [info] DELUGE_WEB_LOG_LEVEL defined as 'info'
2019-01-31 00:42:41.117594 [info] VPN_ENABLED defined as 'yes'
2019-01-31 00:42:41.146052 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/Windscribe-StaticIP.ovpn
dos2unix: converting file /config/openvpn/Windscribe-StaticIP.ovpn to Unix format...
2019-01-31 00:42:41.182681 [info] VPN remote line defined as 'remote STATICIPGOESHERE 443'
2019-01-31 00:42:41.206277 [info] VPN_REMOTE defined as '37.120.141.131'
2019-01-31 00:42:41.229520 [info] VPN_PORT defined as '443'
2019-01-31 00:42:41.255491 [info] VPN_PROTOCOL defined as 'udp'
2019-01-31 00:42:41.279158 [info] VPN_DEVICE_TYPE defined as 'tun0'
2019-01-31 00:42:41.300672 [info] VPN_PROV defined as 'custom'
2019-01-31 00:42:41.323298 [info] LAN_NETWORK defined as '192.168.1.0/24'
2019-01-31 00:42:41.346164 [info] NAME_SERVERS defined as '209.222.18.222,37.235.1.174,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4'
2019-01-31 00:42:41.369284 [info] VPN_USER defined as 'USERNAME'
2019-01-31 00:42:41.391785 [info] VPN_PASS defined as 'PASSWORD'
2019-01-31 00:42:41.414195 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2019-01-31 00:42:41.437094 [info] ENABLE_PRIVOXY defined as 'yes'
2019-01-31 00:42:41.461351 [info] Starting Supervisor...
2019-01-31 00:42:41,781 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing
2019-01-31 00:42:41,782 INFO Set uid to user 0 succeeded
2019-01-31 00:42:41,784 INFO supervisord started with pid 6
2019-01-31 00:42:42,786 INFO spawned: 'start-script' with pid 146
2019-01-31 00:42:42,787 INFO spawned: 'watchdog-script' with pid 147
2019-01-31 00:42:42,788 INFO spawned: 'privoxy-script' with pid 148
2019-01-31 00:42:42,788 INFO reaped unknown pid 7
2019-01-31 00:42:42,792 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2019-01-31 00:42:42,793 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-31 00:42:42,793 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-31 00:42:42,793 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-31 00:42:42,794 DEBG 'watchdog-script' stderr output:
dos2unix: converting file /config/core.conf to Unix format...

2019-01-31 00:42:42,799 DEBG 'start-script' stdout output:
[warn] Username contains characters which could cause authentication issues, please consider changing this if possible

2019-01-31 00:42:42,845 DEBG 'start-script' stdout output:
[info] Default route for container is 172.17.0.1

2019-01-31 00:42:42,848 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.222 to /etc/resolv.conf

2019-01-31 00:42:42,852 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2019-01-31 00:42:42,854 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2019-01-31 00:42:42,857 DEBG 'start-script' stdout output:
[info] Adding 8.8.8.8 to /etc/resolv.conf

2019-01-31 00:42:42,860 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.218 to /etc/resolv.conf

2019-01-31 00:42:42,863 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2019-01-31 00:42:42,866 DEBG 'start-script' stdout output:
[info] Adding 1.0.0.1 to /etc/resolv.conf

2019-01-31 00:42:42,869 DEBG 'start-script' stdout output:
[info] Adding 8.8.4.4 to /etc/resolv.conf

2019-01-31 00:42:42,871 DEBG 'start-script' stdout output:
37.120.141.131

2019-01-31 00:42:42,892 DEBG 'start-script' stdout output:
[info] Docker network defined as 172.17.0.0/16

2019-01-31 00:42:42,895 DEBG 'start-script' stdout output:
[info] Adding 192.168.1.0/24 as route via docker eth0

2019-01-31 00:42:42,896 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2019-01-31 00:42:42,897 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.6
192.168.1.0/24 via 172.17.0.1 dev eth0

2019-01-31 00:42:42,897 DEBG 'start-script' stdout output:
--------------------

2019-01-31 00:42:42,899 DEBG 'start-script' stdout output:
iptable_mangle 16384 1
ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle

2019-01-31 00:42:42,900 DEBG 'start-script' stdout output:
[info] iptable_mangle support detected, adding fwmark for tables

2019-01-31 00:42:42,938 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2019-01-31 00:42:42,939 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD ACCEPT
-P OUTPUT DROP
-A INPUT -i tun0 -j ACCEPT
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 443 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A INPUT -s 192.168.1.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT
-A INPUT -s 192.168.1.0/24 -d 172.17.0.0/16 -i eth0 -p tcp -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 443 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A OUTPUT -d 192.168.1.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 192.168.1.0/24 -o eth0 -p tcp -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT

2019-01-31 00:42:42,940 DEBG 'start-script' stdout output:
--------------------

2019-01-31 00:42:42,940 DEBG 'start-script' stdout output:
[info] Starting OpenVPN...

2019-01-31 00:42:42,958 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:42 2019 WARNING: file 'credentials.conf' is group or others accessible

Thu Jan 31 00:42:42 2019 OpenVPN 2.4.6 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Apr 24 2018
Thu Jan 31 00:42:42 2019 library versions: OpenSSL 1.1.1a 20 Nov 2018, LZO 2.10

2019-01-31 00:42:42,959 DEBG 'start-script' stdout output:
[info] OpenVPN started

2019-01-31 00:42:42,959 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:42 2019 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2019-01-31 00:42:42,959 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:42 2019 Outgoing Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Thu Jan 31 00:42:42 2019 Incoming Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Thu Jan 31 00:42:42 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]37.120.141.131:443
Thu Jan 31 00:42:42 2019 UDP link local: (not bound)
Thu Jan 31 00:42:42 2019 UDP link remote: [AF_INET]37.120.141.131:443

2019-01-31 00:42:43,159 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:43 2019 VERIFY OK: depth=1, C=CA, ST=ON, L=Toronto, O=Windscribe Limited, OU=Operations, CN=Windscribe Node CA
Thu Jan 31 00:42:43 2019 VERIFY KU OK
Thu Jan 31 00:42:43 2019 Validating certificate extended key usage
Thu Jan 31 00:42:43 2019 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Thu Jan 31 00:42:43 2019 VERIFY EKU OK
Thu Jan 31 00:42:43 2019 VERIFY OK: depth=0, C=CA, ST=ON, O=Windscribe Limited, OU=Operations, CN=Windscribe Node Server 4096

2019-01-31 00:42:43,352 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:43 2019 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1602', remote='link-mtu 1550'

Thu Jan 31 00:42:43 2019 WARNING: 'cipher' is used inconsistently, local='cipher AES-256-CBC', remote='cipher AES-256-GCM'

Thu Jan 31 00:42:43 2019 WARNING: 'auth' is used inconsistently, local='auth SHA512', remote='auth [null-digest]'


2019-01-31 00:42:43,352 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:43 2019 Control Channel: TLSv1.2, cipher TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384, 4096 bit RSA
Thu Jan 31 00:42:43 2019 [Windscribe Node Server 4096] Peer Connection Initiated with [AF_INET]37.120.141.131:443

2019-01-31 00:42:49,937 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:49 2019 Data Channel: using negotiated cipher 'AES-256-GCM'
Thu Jan 31 00:42:49 2019 Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
Thu Jan 31 00:42:49 2019 Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key

2019-01-31 00:42:49,938 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:49 2019 TUN/TAP device tun0 opened
Thu Jan 31 00:42:49 2019 do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Thu Jan 31 00:42:49 2019 /usr/bin/ip link set dev tun0 up mtu 1500

2019-01-31 00:42:49,939 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:49 2019 /usr/bin/ip addr add dev tun0 10.117.206.3/23 broadcast 10.117.207.255

2019-01-31 00:42:49,940 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:49 2019 /root/openvpnup.sh tun0 1500 1553 10.117.206.3 255.255.254.0 init

2019-01-31 00:42:49,945 DEBG 'start-script' stdout output:
Thu Jan 31 00:42:49 2019 Initialization Sequence Completed

2019-01-31 00:42:49,998 DEBG 'privoxy-script' stdout output:
[info] Configuring Privoxy...

2019-01-31 00:42:49,998 DEBG 'watchdog-script' stdout output:
[info] Deluge listening interface IP 0.0.0.0 and VPN provider IP 10.117.206.3 different, marking for reconfigure

2019-01-31 00:42:50,001 DEBG 'watchdog-script' stdout output:
[info] Deluge not running

2019-01-31 00:42:50,004 DEBG 'watchdog-script' stdout output:
[info] Deluge Web UI not running

2019-01-31 00:42:50,011 DEBG 'privoxy-script' stdout output:
[info] All checks complete, starting Privoxy...

2019-01-31 00:42:50,013 DEBG 'privoxy-script' stderr output:
2019-01-31 00:42:50.012 1483cdfb6100 Info: Privoxy version 3.0.26

2019-01-31 00:42:50.012 1483cdfb6100 Info: Program name: /usr/bin/privoxy

2019-01-31 00:42:50,397 DEBG 'start-script' stdout output:
[info] Successfully retrieved external IP address STATICIPGOESHERE

2019-01-31 00:42:50,409 DEBG 'watchdog-script' stdout output:
[info] Attempting to start Deluge...
[info] Removing deluge pid file (if it exists)...

2019-01-31 00:42:50,554 DEBG 'watchdog-script' stdout output:
[info] Deluge listening interface currently defined as 0.0.0.0
[info] Deluge listening interface will be changed to 0.0.0.0
[info] Saving changes to Deluge config file /config/core.conf...

2019-01-31 00:42:50,714 DEBG 'watchdog-script' stdout output:
[info] Deluge process started
[info] Waiting for Deluge process to start listening on port 58846...

2019-01-31 00:42:51,394 DEBG 'watchdog-script' stdout output:
[info] No torrents with state 'Error' found


2019-01-31 00:42:51,394 DEBG 'watchdog-script' stdout output:
[info] Starting Deluge Web UI...

2019-01-31 00:42:51,394 DEBG 'watchdog-script' stdout output:
[info] Deluge Web UI started

 

Edited by Tritech

Share this post


Link to post
8 hours ago, Tritech said:

two static ports to forward (35821 & 35822) from windscribe, and set these and incoming and outgoing ranges in deluge, and forwarded in my router to 58946 & 58846. Does this sound correct?

 

no, firstly you shouldn't be setting an outgoing port, just leave it as automatic, for incoming port just specify a single port, so either of the two, and thirdly do not port forward on your router is it will do absolutely nothing, the port forward is for the vpn NOT your isp connection.

Share this post


Link to post
23 hours ago, strike said:

To change the connection port you have to replace .ovpn file with a different one that uses the port you want. Search PIA's website for it, I think the link is in this thread also.  The default port is 1198 UDP. But they have a link with alternative ports. Have you confirmed that you get an incoming port from the server? check the logs

I got it working faster, 5MB down. So that's probably closer to the limit of PIA's connection with a different config file. I'm sure I'm not going to be getting much better than that with a VPN.

 

Thanks for the help!

Share this post


Link to post
On 1/29/2019 at 7:22 AM, binhex said:

as long as windscribe supports openvpn clients then yep it should work just fine, just download the openvpn config file(s) and certs, put them in /config/openvpn and then set the vpn username and password credentials via the env vars. as far as port forwarding goes, if windscribe allocate you a static port them you simply go to deluge and set the port through the deluge web ui and you are done.

@binhex I got my Port Forward at Windscribe.  It's a fixed port.  I got a new .ovpn file and copied that in the proper folder.  I'm just a bit confused, in Deluge, it's under "Incoming Port" that I need to uncheck the "Random" and specify the VPN Port I selected at Windscribe?   Windscribe allow me the port 15001 on a specific VPN server.   Except thru the Deluge GUI, Do I also need to edit the Docker and add a Port Variable ?  This docker run in "Bridge" mode.

 

I'm asking because the tracker I use most now show :  Partial for "Is Connectibale".  Prior to that, I had a "No" for "Is Connectible".

 

Thanks !

Edited by Pducharme

Share this post


Link to post

Hi,

 

I have succesfull installed this docker container on my Synology DS916+ NAS.

All is working fine even the port forwarding through the VPN works fine (Torguard).

But.. I have some questions:

 

- What is the use of Privoxy, do I need it? (otherwise I can disable it in the config)

- The use STRICT_PORT_FORWARD?

- For name servers, do I use the ones from my ISP or better Cloudflare or Google?

- If the VPN drops can it use my ISP connection so it leaks my real IP? (that was the reason the use docker instead running the VPN on the NAS itself)

 

Thx!

Share this post


Link to post
54 minutes ago, Kopernikus said:

What is the use of Privoxy, do I need it?

You can set Sonarr, Radarr, etc to use privoxy for private browsing that your ISP can’t track.

 

57 minutes ago, Kopernikus said:

For name servers, do I use the ones from my ISP or better Cloudflare or Google?

I just use google.

 

59 minutes ago, Kopernikus said:

If the VPN drops can it use my ISP connection so it leaks my real IP?

If the VPN drops the docker shuts down.

Share this post


Link to post
4 hours ago, wgstarks said:

You can set Sonarr, Radarr, etc to use privoxy for private browsing that your ISP can’t track.

 

I just use google.

 

If the VPN drops the docker shuts down.

Oh I see... if I wanted to use Sonarr/Radarr do you think it's best to just install directly on my NAS (availlable through SynoCommunity) or is it beter to let it run in a docker container?

Share this post


Link to post

I use the binhex dockers for both, but no experience with synology. No idea how well they work or if they even will.

Share this post


Link to post

Hello everyone!

 

Very new to dockers in general, installed DelugeVPN on my new Synology NAS yesterday and all is working fine. I've one question, sorry if this is not the right place to ask.

 

With this docker active, can hard drives go into hibernation mode if there is no active torrents? I guess what I'm asking is there any background tasks which periodically access I/O on HDD's and if yes, perhaps there are some options I can disable?

 

Thanks in advance!

Share this post


Link to post
9 hours ago, karka said:

Hello everyone!

 

Very new to dockers in general, installed DelugeVPN on my new Synology NAS yesterday and all is working fine. I've one question, sorry if this is not the right place to ask.

 

With this docker active, can hard drives go into hibernation mode if there is no active torrents? I guess what I'm asking is there any background tasks which periodically access I/O on HDD's and if yes, perhaps there are some options I can disable?

 

Thanks in advance!

you are asking in the wrong forum :-), this is a forum for unraid users not synology, and as your question is 100% related to how synology works with spindown etc then your best bet is to ask in the synology forum.

Share this post


Link to post
1 hour ago, binhex said:

not actually correct, see faq q1 in the link below:- 

https://forums.unraid.net/topic/44108-support-binhex-general/?tab=comments#comment-433613

 

in short there is no shutdown as its not required, ip leakage is prevented at all times via iptables.

 

So adding VPN_OPTIONS Set to “–inactive 3600 –ping 10 –ping-exit 60” is not needed?

 

Btw in my supervidord.log I have folowwing error (but all seems te be working fine):

 

2019-02-04 12:40:09,764 DEBG 'start-script' stderr output:
RTNETLINK answers: Invalid argument

 

Any idea?

 

Thx!

Edited by Kopernikus

Share this post


Link to post
39 minutes ago, Kopernikus said:

So adding VPN_OPTIONS Set to “–inactive 3600 –ping 10 –ping-exit 60” is not needed?

correct

 

39 minutes ago, Kopernikus said:

Btw in my supervidord.log I have folowwing error (but all seems te be working fine):

that error is telling you that the additional options you have specified are not correct, as you dont need them its of no consequence, delete all values for VPN_OPTIONS and be happy :-).

Share this post


Link to post
3 minutes ago, binhex said:

correct

 

that error is telling you that the additional options you have specified are not correct, as you dont need them its of no consequence, delete all values for VPN_OPTIONS and be happy :-).

Thx

 

And the other error?

 

2019-02-04 12:40:09,764 DEBG 'start-script' stderr output:
RTNETLINK answers: Invalid argument

 

Btw thx for the great support!

 

Share this post


Link to post
5 minutes ago, Kopernikus said:

Thx

 

And the other error?

 

2019-02-04 12:40:09,764 DEBG 'start-script' stderr output:
RTNETLINK answers: Invalid argument

 

Btw thx for the great support!

 

no idea without some context around it, i need the full log, please follow the procedure linked below:-

 

https://forums.unraid.net/topic/44108-support-binhex-general/?do=findComment&amp;comment=435831

 

Share this post


Link to post
23 minutes ago, binhex said:

no idea without some context around it, i need the full log, please follow the procedure linked below:-

 

https://forums.unraid.net/topic/44108-support-binhex-general/?do=findComment&amp;comment=435831

 

My full log:

 

2019-02-04 13:48:16.431627 [info] System information Linux DelugeVPN 4.4.59+ #23824 SMP PREEMPT Tue Dec 25 18:27:56 CST 2018 x86_64 GNU/Linux
2019-02-04 13:48:16.495822 [info] PUID defined as '1026'
2019-02-04 13:48:16.563078 [info] PGID defined as '100'
2019-02-04 13:48:16.671075 [info] UMASK defined as '000'
2019-02-04 13:48:16.732681 [info] Permissions already set for volume mappings
2019-02-04 13:48:16.803557 [info] DELUGE_DAEMON_LOG_LEVEL defined as 'info'
2019-02-04 13:48:16.865694 [info] DELUGE_WEB_LOG_LEVEL defined as 'info'
2019-02-04 13:48:16.927967 [info] VPN_ENABLED defined as 'yes'
2019-02-04 13:48:16.998282 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/TorGuard.XXXXXXX.ovpn
dos2unix: converting file /config/openvpn/TorGuard.XXXXXXX.ovpn to Unix format...
2019-02-04 13:48:17.109678 [info] VPN remote line defined as 'remote XX.torguardvpnaccess.com 1215'
2019-02-04 13:48:17.172293 [info] VPN_REMOTE defined as 'XX.torguardvpnaccess.com'
2019-02-04 13:48:17.235517 [info] VPN_PORT defined as '1215'
2019-02-04 13:48:17.304122 [info] VPN_PROTOCOL defined as 'udp'
2019-02-04 13:48:17.367797 [info] VPN_DEVICE_TYPE defined as 'tun0'
2019-02-04 13:48:17.430205 [info] VPN_PROV defined as 'custom'
2019-02-04 13:48:17.492657 [info] LAN_NETWORK defined as '192.168.99.1/24'
2019-02-04 13:48:17.555232 [info] NAME_SERVERS defined as '1.1.1.1'
2019-02-04 13:48:17.618812 [info] VPN_USER defined as 'XXXXXXXXXXXXXXX'
2019-02-04 13:48:17.681976 [info] VPN_PASS defined as 'XXXXXXXXXXXXXXX'
2019-02-04 13:48:17.745569 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2019-02-04 13:48:17.808243 [info] ENABLE_PRIVOXY defined as 'yes'
2019-02-04 13:48:17.870369 [info] Starting Supervisor...
2019-02-04 13:48:18,228 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing
2019-02-04 13:48:18,228 INFO Set uid to user 0 succeeded
2019-02-04 13:48:18,235 INFO supervisord started with pid 7
2019-02-04 13:48:19,238 INFO spawned: 'start-script' with pid 142
2019-02-04 13:48:19,240 INFO spawned: 'watchdog-script' with pid 143
2019-02-04 13:48:19,242 INFO spawned: 'privoxy-script' with pid 144
2019-02-04 13:48:19,243 INFO reaped unknown pid 8
2019-02-04 13:48:19,259 DEBG 'privoxy-script' stdout output:
[debug] Waiting for valid IP address from tunnel...

2019-02-04 13:48:19,259 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-02-04 13:48:19,259 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-02-04 13:48:19,259 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-02-04 13:48:19,261 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN
[debug] Environment variables defined as follows

2019-02-04 13:48:19,261 DEBG 'start-script' stdout output:
BASH=/bin/bash
BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath
BASH_ALIASES=()
BASH_ARGC=()
BASH_ARGV=()
BASH_CMDS=()
BASH_LINENO=([0]="0")
BASH_SOURCE=([0]="/root/start.sh")
BASH_VERSINFO=([0]="5" [1]="0" [2]="0" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu")
BASH_VERSION='5.0.0(1)-release'
DEBUG=true
DELUGE_DAEMON_LOG_LEVEL=info
DELUGE_WEB_LOG_LEVEL=info
DIRSTACK=()
ENABLE_PRIVOXY=yes
EUID=0
GROUPS=()
HOME=/home/nobody
HOSTNAME=DelugeVPN
HOSTTYPE=x86_64
IFS=$' \t\n'
LANG=en_GB.UTF-8
LAN_NETWORK=192.168.99.1/24
MACHTYPE=x86_64-pc-linux-gnu
NAME_SERVERS=1.1.1.1
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PGID=100
PIPESTATUS=([0]="0")
PPID=7
PS4='+ '
PUID=1026
PWD=/
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments
SHLVL=1
SUPERVISOR_ENABLED=1
SUPERVISOR_GROUP_NAME=start-script
SUPERVISOR_PROCESS_NAME=start-script
TERM=xterm
TZ=Europe/Brussels
UID=0
UMASK=000
VPN_CONFIG=/config/openvpn/TorGuard.XXXXXXX.ovpn
VPN_DEVICE_TYPE=tun0
VPN_ENABLED=yes
VPN_OPTIONS=
VPN_PASS=XXXXXXX
VPN_PORT=1215
VPN_PROTOCOL=udp
VPN_PROV=custom
VPN_REMOTE=XX.torguardvpnaccess.com
VPN_USER=XXXXXXXXXXXXXXX
_='[debug] Environment variables defined as follows'
[debug] Directory listing of files in /config/openvpn as follows

2019-02-04 13:48:19,267 DEBG 'watchdog-script' stderr output:
dos2unix: converting file /config/core.conf to Unix format...

2019-02-04 13:48:19,268 DEBG 'watchdog-script' stdout output:
[debug] Waiting for valid IP address from tunnel...

2019-02-04 13:48:19,301 DEBG 'start-script' stdout output:
total 12
drwxrwxr-x 1 nobody users   86 Feb  4 13:48 .
drwxrwxr-x 1 nobody users  338 Feb  4 13:48 ..
-rwxrwxr-x 1 nobody users 3042 Sep 24  2014 ca.crt
-rwxrwxr-x 1 nobody users   32 Feb  4 13:38 credentials.conf
-rwxrwxr-x 1 nobody users 2595 Feb  4 13:48 TorGuard.XXXXXXX.ovpn

2019-02-04 13:48:19,374 DEBG 'start-script' stdout output:
[debug] Contents of ovpn file /config/openvpn/TorGuard.XXXXXXX.ovpn as follows...

2019-02-04 13:48:19,375 DEBG 'start-script' stdout output:
remote XX.torguardvpnaccess.com 1215
client
dev tun
proto udp
remote-cert-tls server
auth SHA512
key-direction 1
setenv CLIENT_CERT 0
<tls-auth>
-----BEGIN OpenVPN Static key V1-----
XkeyX
-----END OpenVPN Static key V1-----
</tls-auth>
resolv-retry infinite
nobind
cipher AES-256-GCM
auth-user-pass credentials.conf
compress
ncp-disable
tun-mtu-extra 32
<ca>
-----BEGIN CERTIFICATE-----
XkeyX
-----END CERTIFICATE-----
</ca>
2019-02-04 13:48:19,401 DEBG 'start-script' stdout output:
[info] Default route for container is 172.17.0.1

2019-02-04 13:48:19,408 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2019-02-04 13:48:19,444 DEBG 'start-script' stdout output:
[info] Remote VPN endpoint resolves to the following A record(s)...
XX.XXX.XX.XX

2019-02-04 13:48:19,467 DEBG 'start-script' stdout output:
[debug] Show name servers defined for container

2019-02-04 13:48:19,468 DEBG 'start-script' stdout output:
nameserver 1.1.1.1

2019-02-04 13:48:19,469 DEBG 'start-script' stdout output:
[debug] Show name resolution for VPN endpoint XX.torguardvpnaccess.com

2019-02-04 13:48:19,491 DEBG 'start-script' stdout output:
;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 23040
;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;; XX.torguardvpnaccess.com.    IN    A

;; ANSWER SECTION:
XX.torguardvpnaccess.com.    30    IN    A    XX.XXX.XX.XXX

;; AUTHORITY SECTION:

;; ADDITIONAL SECTION:

;; Query time: 16 msec
;; SERVER: 1.1.1.1
;; WHEN: Mon Feb  4 13:48:19 2019
;; MSG SIZE  rcvd: 58

2019-02-04 13:48:19,491 DEBG 'start-script' stdout output:
[debug] Show contents of hosts file

2019-02-04 13:48:19,492 DEBG 'start-script' stdout output:
127.0.0.1    localhost
::1    localhost ip6-localhost ip6-loopback
fe00::0    ip6-localnet
ff00::0    ip6-mcastprefix
ff02::1    ip6-allnodes
ff02::2    ip6-allrouters
172.17.0.2    DelugeVPN
XX.XXX.XX.XX    XX.torguardvpnaccess.com

2019-02-04 13:48:19,502 DEBG 'start-script' stdout output:
[debug] Docker interface defined as eth0

2019-02-04 13:48:19,509 DEBG 'start-script' stdout output:
[debug] Docker IP defined as 172.17.0.2

2019-02-04 13:48:19,518 DEBG 'start-script' stdout output:
[debug] Docker netmask defined as 255.255.0.0

2019-02-04 13:48:19,533 DEBG 'start-script' stdout output:
[info] Docker network defined as    172.17.0.0/16

2019-02-04 13:48:19,540 DEBG 'start-script' stdout output:
[info] Adding 192.168.99.1/24 as route via docker eth0

2019-02-04 13:48:19,542 DEBG 'start-script' stderr output:
RTNETLINK answers: Invalid argument

2019-02-04 13:48:19,542 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2019-02-04 13:48:19,544 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.2

2019-02-04 13:48:19,544 DEBG 'start-script' stdout output:
--------------------

2019-02-04 13:48:19,544 DEBG 'start-script' stdout output:
[debug] Modules currently loaded for kernel

2019-02-04 13:48:19,549 DEBG 'start-script' stdout output:
Module                  Size  Used by
xt_ipvs                 2202  0
ip_vs_rr                1447  0
ip_vs                 127371  3 ip_vs_rr,xt_ipvs
xt_mark                 1317  0
br_netfilter           13589  0
bridge                 55340  1 br_netfilter
stp                     1693  1 bridge
aufs                  194031  0
macvlan                13776  0
veth                    5094  0
xt_conntrack            3401  1
xt_addrtype             2893  1
ipt_MASQUERADE          1213  6
xt_REDIRECT             1486  0
nf_nat_masquerade_ipv4     1929  1 ipt_MASQUERADE
xt_nat                  1977  5
iptable_nat             1959  1
nf_nat_ipv4             4903  1 iptable_nat
nf_nat_redirect         1395  1 xt_REDIRECT
nf_nat                 10925  4 nf_nat_redirect,nf_nat_ipv4,xt_nat,nf_nat_masquerade_ipv4
iptable_mangle          1656  0
tun                    19295  0
cifs                  372446  0
udf                    80034  0
isofs                  31339  0
loop                   19749  0
tcm_loop               12940  1
syno_hddmon             1880  0
iscsi_target_mod      232570  1
target_core_ep         46505  2
target_core_multi_file    26446  1
hid_generic             1321  0
target_core_file       39992  1
target_core_iblock     19769  1
usbhid                 25951  0
hid                    94408  2 hid_generic,usbhid
target_core_mod       924399  18 target_core_iblock,target_core_multi_file,iscsi_target_mod,target_core_ep,target_core_file,tcm_loop
usblp                  10618  0
syno_extent_pool     1295704  0
rodsp_ep               77251  3 target_core_multi_file,syno_extent_pool,target_core_file
usb_storage            49426  1
uhci_hcd               22683  0
ehci_pci                3935  0
ehci_hcd               42414  1 ehci_pci
nf_conntrack_ipv6       6563  0
nf_defrag_ipv6         23062  1 nf_conntrack_ipv6
ip6table_filter         1532  1
ip6_tables             14730  1 ip6table_filter
xt_recent               8550  0
xt_iprange              1648  0
xt_limit                1985  5
xt_state                1367  0
xt_tcpudp               2543  18
xt_multiport            1830  0
xt_LOG                  1423  0
nf_conntrack_ipv4      11616  2
nf_defrag_ipv4          1475  1 nf_conntrack_ipv4
nf_conntrack           62480  8 ip_vs,nf_nat,xt_state,nf_nat_ipv4,xt_conntrack,nf_nat_masquerade_ipv4,nf_conntrack_ipv4,nf_conntrack_ipv6
iptable_filter          1592  1
ip_tables              14092  3 iptable_filter,iptable_mangle,iptable_nat
x_tables               16302  19 ip6table_filter,xt_ipvs,xt_iprange,xt_mark,xt_recent,ip_tables,xt_tcpudp,ipt_MASQUERADE,xt_limit,xt_state,xt_conntrack,xt_LOG,xt_nat,xt_multiport,iptable_filter,xt_REDIRECT,iptable_mangle,ip6_tables,xt_addrtype
bonding               108314  0
apollolake_synobios    58086  0
leds_lp3943             4500  0
exfat                 117259  0
btrfs                 935232  1
i915                 1150577  0
drm_kms_helper        105637  1 i915
syscopyarea             3262  1 drm_kms_helper
sysfillrect             3754  1 drm_kms_helper
sysimgblt               2239  1 drm_kms_helper
fb_sys_fops             1314  1 drm_kms_helper
cfbfillrect             3818  1 drm_kms_helper
cfbcopyarea             3326  1 drm_kms_helper
cfbimgblt               2303  1 drm_kms_helper
drm                   269184  3 i915,drm_kms_helper
fb                     34811  2 i915,drm_kms_helper
fbdev                    966  1 fb
intel_agp              10712  0
intel_gtt              12326  2 i915,intel_agp
agpgart                25941  3 drm,intel_agp,intel_gtt
video                  25321  1 i915
backlight               6096  2 i915,video
button                  4756  1 i915
synoacl_vfs            15727  2
hfsplus                92310  0
md4                     4337  0
hmac                    2961  0
r8168                 522110  0
igb                   173319  0
i2c_algo_bit            5328  1 i915
e1000e                168269  0
vxlan                  32753  0
ip6_udp_tunnel          1903  1 vxlan
udp_tunnel              2355  1 vxlan
fuse                   85035  0
vfat             
2019-02-04 13:48:19,550 DEBG 'start-script' stdout output:
      10287  0
fat                    53276  1 vfat
crc32c_intel           12913  1
aesni_intel           157811  0
glue_helper             3893  1 aesni_intel
lrw                     3541  1 aesni_intel
gf128mul                5546  1 lrw
ablk_helper             1948  1 aesni_intel
arc4                    2040  0
cryptd                  7882  2 aesni_intel,ablk_helper
ecryptfs               77944  1 btrfs
sha256_generic         11993  0
ecb                     2113  0
aes_x86_64              7503  1 aesni_intel
authenc                 4076  0
des_generic            16861  0
ansi_cprng              3940  0
cts                     4136  0
md5                     2833  0
cbc                     2712  0
cpufreq_powersave       1126  0
cpufreq_performance     1130  4
acpi_cpufreq            6495  0
processor              23262  1 acpi_cpufreq
cpufreq_stats           2742  0
dm_snapshot            28359  0
dm_bufio               14214  1 dm_snapshot
crc_itu_t               1467  1 udf
crc_ccitt               1467  0
quota_v2                4047  0
quota_tree              7850  1 quota_v2
psnap                   1917  0
p8022                   1179  0
llc                     3569  4 stp,p8022,psnap,bridge
sit                    15812  0
tunnel4                 2261  1 sit
ip_tunnel              13200  1 sit
ipv6                  336006  90 sit,ip_vs,nf_defrag_ipv6,nf_conntrack_ipv6
zram                   19042  4
sg                     25851  0
etxhci_hcd             86266  0
xhci_pci                4650  0
xhci_hcd              105019  1 xhci_pci
usbcore               198008  10 etxhci_hcd,usblp,uhci_hcd,usb_storage,ehci_hcd,ehci_pci,usbhid,xhci_hcd,xhci_pci
usb_common              2222  1 usbcore

2019-02-04 13:48:19,558 DEBG 'start-script' stdout output:
iptable_mangle          1656  0
ip_tables              14092  3 iptable_filter,iptable_mangle,iptable_nat
x_tables               16302  19 ip6table_filter,xt_ipvs,xt_iprange,xt_mark,xt_recent,ip_tables,xt_tcpudp,ipt_MASQUERADE,xt_limit,xt_state,xt_conntrack,xt_LOG,xt_nat,xt_multiport,iptable_filter,xt_REDIRECT,iptable_mangle,ip6_tables,xt_addrtype

2019-02-04 13:48:19,560 DEBG 'start-script' stdout output:
[info] iptable_mangle support detected, adding fwmark for tables

2019-02-04 13:48:19,625 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2019-02-04 13:48:19,627 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD ACCEPT
-P OUTPUT DROP
-A INPUT -i tun0 -j ACCEPT
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 1215 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A INPUT -s 192.168.99.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT
-A INPUT -s 192.168.99.0/24 -d 172.17.0.0/16 -i eth0 -p tcp -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 1215 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A OUTPUT -d 192.168.99.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 192.168.99.0/24 -o eth0 -p tcp -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT

2019-02-04 13:48:19,629 DEBG 'start-script' stdout output:
--------------------
[debug] OpenVPN command line:- /usr/bin/openvpn --daemon --reneg-sec 0 --mute-replay-warnings --auth-nocache --setenv VPN_PROV 'custom' --setenv DEBUG 'true' --setenv VPN_DEVICE_TYPE 'tun0' --setenv VPN_REMOTE 'XX.torguardvpnaccess.com' --script-security 2 --up /root/openvpnup.sh --up-delay --up-restart --writepid /root/openvpn.pid --remap-usr1 SIGHUP --log-append /dev/stdout --pull-filter ignore 'up' --pull-filter ignore 'down' --pull-filter ignore 'route-ipv6' --pull-filter ignore 'ifconfig-ipv6' --pull-filter ignore 'tun-ipv6' --pull-filter ignore 'persist-tun' --pull-filter ignore 'reneg-sec' --remote XX.XXX.XX.XX 1215 udp --remote-random --keepalive 10 60 --auth-user-pass credentials.conf --cd /config/openvpn --config '/config/openvpn/TorGuard.XXXXXXX.ovpn'
[info] Starting OpenVPN...

2019-02-04 13:48:19,641 DEBG 'start-script' stdout output:
Mon Feb  4 13:48:19 2019 WARNING: file 'credentials.conf' is group or others accessible
Mon Feb  4 13:48:19 2019 OpenVPN 2.4.6 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Apr 24 2018
Mon Feb  4 13:48:19 2019 library versions: OpenSSL 1.1.1a  20 Nov 2018, LZO 2.10

2019-02-04 13:48:19,642 DEBG 'start-script' stdout output:
[info] OpenVPN started

2019-02-04 13:48:19,643 DEBG 'start-script' stdout output:
[debug] Waiting for valid IP address from tunnel...

2019-02-04 13:48:19,644 DEBG 'start-script' stdout output:
Mon Feb  4 13:48:19 2019 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2019-02-04 13:48:19,648 DEBG 'start-script' stdout output:
Mon Feb  4 13:48:19 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]XX.XXX.XX.XX:1215
Mon Feb  4 13:48:19 2019 UDP link local: (not bound)
Mon Feb  4 13:48:19 2019 UDP link remote: [AF_INET]XX.XXX.XX.XX:1215

2019-02-04 13:48:20,025 DEBG 'start-script' stdout output:
Mon Feb  4 13:48:20 2019 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1582', remote='link-mtu 1601'
Mon Feb  4 13:48:20 2019 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1532', remote='tun-mtu 1500'
Mon Feb  4 13:48:20 2019 WARNING: 'comp-lzo' is present in local config but missing in remote config, local='comp-lzo'
Mon Feb  4 13:48:20 2019 WARNING: 'cipher' is used inconsistently, local='cipher AES-256-GCM', remote='cipher AES-128-CBC'
Mon Feb  4 13:48:20 2019 WARNING: 'auth' is used inconsistently, local='auth [null-digest]', remote='auth SHA512'
Mon Feb  4 13:48:20 2019 WARNING: 'keysize' is used inconsistently, local='keysize 256', remote='keysize 128'
Mon Feb  4 13:48:20 2019 [TG-OVPN-CA] Peer Connection Initiated with [AF_INET]XX.XXX.XX.XXX:1215

2019-02-04 13:48:21,286 DEBG 'start-script' stdout output:
Mon Feb  4 13:48:21 2019 TUN/TAP device tun0 opened
Mon Feb  4 13:48:21 2019 do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Mon Feb  4 13:48:21 2019 /usr/bin/ip link set dev tun0 up mtu 1500

2019-02-04 13:48:21,288 DEBG 'start-script' stdout output:
Mon Feb  4 13:48:21 2019 /usr/bin/ip addr add dev tun0 local XX.XX.X.X peer 10.37.0.5

2019-02-04 13:48:21,291 DEBG 'start-script' stdout output:
Mon Feb  4 13:48:21 2019 /root/openvpnup.sh tun0 1500 1585 XX.XX.X.X 10.37.0.5 init

2019-02-04 13:48:21,299 DEBG 'start-script' stdout output:
[debug] Waiting for valid IP address from tunnel...

2019-02-04 13:48:21,299 DEBG 'start-script' stdout output:
[debug] Waiting for valid IP address from tunnel...

2019-02-04 13:48:21,304 DEBG 'start-script' stdout output:
Mon Feb  4 13:48:21 2019 Initialization Sequence Completed

2019-02-04 13:48:21,374 DEBG 'privoxy-script' stdout output:
[debug] Valid IP address from tunnel acquired 'XX.XX.X.X'
[info] Configuring Privoxy...

2019-02-04 13:48:21,392 DEBG 'watchdog-script' stdout output:
[debug] Valid IP address from tunnel acquired 'XX.XX.X.X'
[info] Deluge listening interface IP 0.0.0.0 and VPN provider IP XX.XX.X.X different, marking for reconfigure

2019-02-04 13:48:21,399 DEBG 'start-script' stdout output:
[debug] Valid IP address from tunnel acquired 'XX.XX.X.X'

2019-02-04 13:48:21,400 DEBG 'watchdog-script' stdout output:
[info] Deluge not running

2019-02-04 13:48:21,400 DEBG 'privoxy-script' stdout output:
[info] All checks complete, starting Privoxy...

2019-02-04 13:48:21,402 DEBG 'privoxy-script' stderr output:
2019-02-04 13:48:21.401 7fe0cc6db100 Info: Privoxy version 3.0.26
2019-02-04 13:48:21.402 7fe0cc6db100 Info: Program name: /usr/bin/privoxy

2019-02-04 13:48:21,413 DEBG 'watchdog-script' stdout output:
[info] Deluge Web UI not running

2019-02-04 13:48:21,421 DEBG 'start-script' stdout output:
[debug] Valid IP address from tunnel acquired 'XX.XX.X.X'

2019-02-04 13:48:21,422 DEBG 'start-script' stdout output:
[debug] Attempting to get external IP using Name Server 'ns1.google.com'...

2019-02-04 13:48:21,424 DEBG 'start-script' stdout output:
[debug] Valid IP address from tunnel acquired 'XX.XX.X.X'

2019-02-04 13:48:21,425 DEBG 'start-script' stdout output:
[debug] VPN provider custom is != pia, skipping incoming port detection

2019-02-04 13:48:21,518 DEBG 'start-script' stdout output:
[info] Successfully retrieved external IP address XX.XXX.XX.XX

2019-02-04 13:48:21,618 DEBG 'watchdog-script' stdout output:
[debug] External IP address from tunnel is 'XX.XXX.XX.XX'

2019-02-04 13:48:21,618 DEBG 'watchdog-script' stdout output:
[info] Attempting to start Deluge...
[info] Removing deluge pid file (if it exists)...

2019-02-04 13:48:21,985 DEBG 'watchdog-script' stdout output:
[info] Deluge listening interface currently defined as 0.0.0.0
[info] Deluge listening interface will be changed to 0.0.0.0
[info] Saving changes to Deluge config file /config/core.conf...

2019-02-04 13:48:22,408 DEBG 'watchdog-script' stdout output:
[info] Deluge process started
[info] Waiting for Deluge process to start listening on port 58846...

 

Thx in advance.

Share this post


Link to post
1 minute ago, Kopernikus said:

Correct me if I'm wrong but my subnet is 255.255.255.0 and my gateway 192.168.99.1 so 192.168.99.1/24 should be correct?

nope, take a look at the link again, what you have defined above is a host NOT a network.

Share this post


Link to post
4 minutes ago, binhex said:

nope, take a look at the link again, what you have defined above is a host NOT a network.

Ok.. so it should be 192.168.99.0/24 then?

Share this post


Link to post
Just now, Kopernikus said:

Ok.. so it should be 192.168.99.0/24 then?

you got it.

Share this post


Link to post

I am not getting good speeds while using PIA.  I'm using Ubuntu and Linux Mint torrents to test due to high availability.  Using DelugeVPN and QbittorentVPN connecting to PIA servers with and without portforwarding, which according to PIA Speed Test connect with my full speed, I get 1/8th of my full speed.  Setting VPN_Enabled=no I get full speed.  

 

I tried different settings within the clients like UPNP disabled and uPT(?) disabled with no improvement. 

 

Is there anything else to try?

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.