17 minutes ago, EC28 said:

Filebot would be a big one.  A few others like ltconfig.

All plugins for v2 needs to be updated and most are not yet, so you need to roll back to v1 to be able to use most plugins.

Edited December 13, 20196 yr by strike

1 minute ago, strike said:

All plugins for v2 needs to be updated and most are not yet, so you need to roll back to v1 to be able to use most plugins.

Thanks.  I may try that and see.  But my hardlink issue may still be present even using it inside of deluge if I am understanding the hardlink issue on unRAID.

Not sure how to setup airvpn with DelugeVPN? I see the airvpn option on the pulldown.

 

Where do I get the OPenvpn files?  Which ones do I use?

Not sure how to setup airvpn with DelugeVPN? I see the airvpn option on the pulldown.
 
Where do I get the OPenvpn files?  Which ones do I use?

Documentation link in op, VPN docker guide

Sent from my CLT-L09 using Tapatalk

So I take it we are not able to install any plug-ins right now? Been trying to get Auto Remove plugin to work but it's not taking. 

2 minutes ago, SiRMarlon said:

So I take it we are not able to install any plug-ins right now? Been trying to get Auto Remove plugin to work but it's not taking. 

 

On 12/13/2019 at 11:50 PM, strike said:

All plugins for v2 needs to be updated and most are not yet, so you need to roll back to v1 to be able to use most plugins.

 

So I take it we are not able to install any plug-ins right now? Been trying to get Auto Remove plugin to work but it's not taking. 

Auto remove plugin requires an additional python module installing, for the rest see strikes comment

Sent from my CLT-L09 using Tapatalk

2 hours ago, binhex said:

 

 

Auto remove plugin requires an additional python module installing, for the rest see strikes comment

Sent from my CLT-L09 using Tapatalk
 

 

I’m guessing you’re referring to the “future” module? Is there a command to install it in your docker?

I recently upgraded my server to newer hardware and I am going through the rebuild process, I re-installed my Docker Apps and when I attempt to start the DelugeVPN app, the container fails to start, and just remains as "stopped"  Digging deeper I see this on the log file...

 

2019-12-15 13:54:34.057325 [info] System information Linux 131ebefdafcc 4.19.56-Unraid #1 SMP Tue Jun 25 10:19:34 PDT 2019 x86_64 GNU/Linux
2019-12-15 13:54:34.152775 [info] PUID defined as '99'
2019-12-15 13:54:34.256328 [info] PGID defined as '100'
2019-12-15 13:54:34.588442 [info] UMASK defined as '000'
2019-12-15 13:54:34.689946 [info] Permissions already set for volume mappings
2019-12-15 13:54:34.798754 [info] DELUGE_DAEMON_LOG_LEVEL defined as 'info'
2019-12-15 13:54:34.893517 [info] DELUGE_WEB_LOG_LEVEL defined as 'info'
2019-12-15 13:54:34.986419 [info] VPN_ENABLED defined as 'yes'
2019-12-15 13:54:35.104633 [crit] No OpenVPN config file located in /config/openvpn/ (ovpn extension), please download from your VPN provider and then restart this container, exiting...

 

Not sure, if this is my issue or part of the issue but I also don't see why I need to add an OpenVPN config file, if I am using PIA. Anyone else have this problem?

 

 

4 minutes ago, wrckid said:

Not sure, if this is my issue or part of the issue but I also don't see why I need to add an OpenVPN config file, if I am using PIA. Anyone else have this problem?

Yes, that's your issue. See Q7: https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md

10 minutes ago, strike said:

Yes, that's your issue. See Q7: https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md

Cool, thanks for the documentation.

Thanks in advance for help here.

 

Issue: Q10 from the DelugeVPN FAQ.  I can’t connect to the WebUI when the VPN is on from either my local network or from outside my network.  I *can* connect to the WebUI when the VPN is off.  I am using PIA.

 

I’m facing the exact issue described in unPaid’s DelugeVPN Q10, regarding port forwarding.  The answer in the FAQ to that question is to ensure you’re using a PIA server location that supports port forwarding: I have tried five of the supposedly acceptable server locations and none have allowed for a successful OpenVPN connection.  Note: I have had the PIA .ovpn files in /config/openvpn one at a time, so there weren't conflicts.

 

Hardware setup:

 - New Synology user following the TomTheGreat guide to setting up DelugeVPN for Synology

 - Synology is connected via ethernet cable to an Eero router.  Router is connected to a cable modem (NOT a router)

 - The DelugeVPN container defaults had ports open for 58946, 58846, 8118, 8112.  These have been opened using the Eero app and are visible through, e.g., canyouseeme.org

 

Log attached.

supervisord 191215 1935.log

I was hoping someone could walk me through rolling back to a previous release. I recently update my docker, and now autoremoveplus no longer works. From reading the last few pages, it's clear I need to roll back to a previous version in order to get this to work again. The trouble is, I have no idea how to do that. A detailed guid would be greatly apreaciated! 

22 minutes ago, jebusfreek666 said:

I was hoping someone could walk me through rolling back to a previous release. I recently update my docker, and now autoremoveplus no longer works. From reading the last few pages, it's clear I need to roll back to a previous version in order to get this to work again. The trouble is, I have no idea how to do that. A detailed guid would be greatly apreaciated! 

Q5 from the following link:-

https://github.com/binhex/documentation/blob/master/docker/faq/unraid.md

1 hour ago, jebusfreek666 said:

was hoping someone could walk me through rolling back to a previous release

Here is the one I’ve been using-

binhex/arch-delugevpn:1.3.15_18_ge050905b2-1-04

 

Just now, wgstarks said:

Here is the one I’ve been using-

binhex/arch-delugevpn:1.3.15_18_ge050905b2-1-04

 

 

1 hour ago, binhex said:

Q5 from the following link:-

https://github.com/binhex/documentation/blob/master/docker/faq/unraid.md

Thanks. oddly enough, it works on binhex/arch-delugevpn:2.0.3-1-01 for me. didnt have to go to v1

fyi guys python module future is now included in the latest image, so the plugin autoremoveplus SHOULD (didnt test) now work.

10 minutes ago, binhex said:

fyi guys python module future is now included in the latest image, so the plugin autoremoveplus SHOULD (didnt test) now work.

Outstanding

19 hours ago, binhex said:

fyi guys python module future is now included in the latest image, so the plugin autoremoveplus SHOULD (didnt test) now work.

apparently it also requires the python requests module, so i will include that and rebuild the image later today.

Appreciate any help that anyone has on the matter below man. 
 

I am new to Unraid and recently setup Jackett, Sonarr and Plex using binhex’s variants. They all work great and testing was successful. 
 

I set up DelugeVPN and was able to connect to it fine. Interestingly, I was able to download the Ubuntu torrent, but when I tried torrents from a private tracker, there is an error with the tracker announcement. It says: Error: service requested not available. I left it for an entire night and the problem persists. 
 

Any thoughts on the above?

5 hours ago, hkgnp said:

Appreciate any help that anyone has on the matter below man. 
 

I am new to Unraid and recently setup Jackett, Sonarr and Plex using binhex’s variants. They all work great and testing was successful. 
 

I set up DelugeVPN and was able to connect to it fine. Interestingly, I was able to download the Ubuntu torrent, but when I tried torrents from a private tracker, there is an error with the tracker announcement. It says: Error: service requested not available. I left it for an entire night and the problem persists. 
 

Any thoughts on the above?

Are you using these from within Jackett? Did you test the connection in Jackett to make sure it works? Sounds like the specific private tracker you are trying to use might be the issue. 

On 12/17/2019 at 2:16 AM, binhex said:

apparently it also requires the python requests module, so i will include that and rebuild the image later today.

Any word on this?  I really hate having to manually go in and remove torrents.

14 minutes ago, SiRMarlon said:

Are you using these from within Jackett? Did you test the connection in Jackett to make sure it works? Sounds like the specific private tracker you are trying to use might be the issue. 

Thanks mate. 
 

The connection in Jackett works. Both tests for Sonarr and Jackett were successful for the connection to Deluge and the tracker respectively.
 

I am not sure if it has to do with the version of Deluge, but I am going to try with qBittorrent to see if it works. 
 

Meanwhile, appreciate any other ideas as well. 

Any word on this? [emoji4] I really hate having to manually go in and remove torrents. [emoji3]

It got done and is now included in the latest image

Sent from my CLT-L09 using Tapatalk

3 hours ago, hkgnp said:

Thanks mate. 
 

The connection in Jackett works. Both tests for Sonarr and Jackett were successful for the connection to Deluge and the tracker respectively.
 

I am not sure if it has to do with the version of Deluge, but I am going to try with qBittorrent to see if it works. 
 

Meanwhile, appreciate any other ideas as well. 

Just thought to update everyone. I switched over the qBittorrent-VPN from binhex, and was able to download successfully. I think the private tracker might have blocked the latest version of Deluge.