Jump to content
binhex

[Support] binhex - DelugeVPN

6103 posts in this topic Last Reply

Recommended Posts

Posted (edited)

i'm at my wits end here - i had delugevpn up and happily running with no issues - then i rebooted my unraid server to do some basic maintenance and when i tried to bring it back up delugevpn ceased to work - i've reached out to PIA to see if their endpoints are having issues - they said that there were but that everything had been resolved.  I'm also using SABNZBvpn from binhex and its still working just fine.  I attached a log dump - i've used different config files and and i've rebuilt the docker all with no luck. any suggestions would be appreciated.

 

 

EDIT : ok just saw the updated responses from last night - so my default Vancouver still isn't working  - will update this thread when/if it becomes available again - sorry for the spam

 

log.log

Edited by SeattleBandit

Share this post


Link to post

 

2 minutes ago, SeattleBandit said:

i'm at my wits end here - i had delugevpn up and happily running with no issues - then i rebooted my unraid server to do some basic maintenance and when i tried to bring it back up delugevpn ceased to work - i've reached out to PIA to see if their endpoints are having issues - they said that there were but that everything had been resolved.  I'm also using SABNZBvpn from binhex and its still working just fine.  I attached a log dump - i've used different config files and and i've rebuilt the docker all with no luck. any suggestions would be appreciated.

 

log.log 6.4 kB · 0 downloads

Try a non-Canadian endpoint

Share this post


Link to post
5 minutes ago, SeattleBandit said:

i'm at my wits end here - i had delugevpn up and happily running with no issues - then i rebooted my unraid server to do some basic maintenance and when i tried to bring it back up delugevpn ceased to work - i've reached out to PIA to see if their endpoints are having issues - they said that there were but that everything had been resolved.  I'm also using SABNZBvpn from binhex and its still working just fine.  I attached a log dump - i've used different config files and and i've rebuilt the docker all with no luck. any suggestions would be appreciated.

 

 

EDIT : ok just saw the updated responses from last night - so my default Vancouver still isn't working  - will update this thread when/if it becomes available again - sorry for the spam

 

log.log 6.4 kB · 3 downloads

 

3 minutes ago, xxDeadbolt said:

 

Try a non-Canadian endpoint

France is currently working.

Share this post


Link to post

While I'm here, can you have more than one endpoint, .ovpn file in the appdata/binhex-delugevpn/openvpn folder?

Share this post


Link to post
8 minutes ago, wgstarks said:

 

France is currently working.

boom - works like a charm - guess i should have expanded from using just the canuck endpoints - thanks folks

Share this post


Link to post
47 minutes ago, xxDeadbolt said:

While I'm here, can you have more than one endpoint, .ovpn file in the appdata/binhex-delugevpn/openvpn folder?

The older I get the flakier my memory is but I think @binhex added this feature a few months ago. There should be a post about it in the thread somewhere if you want to use google to search it.

Share this post


Link to post
Posted (edited)

EU Endpoints working again.

 

Quick question, Is there a way to get the webui to function if you're using a custom br ip? When I use a custom IP my web ui no longer loads. Bridge obviously works just fine.

 

Also, I AM using a server that supports port forward. Sweden. Tried Frankfurt as well.

 

PS. Disabling VPN lets web ui function even on a custom IP. I've tried a ton of things but I'm at a loss.

Edited by pXius

Share this post


Link to post
34 minutes ago, wgstarks said:

The older I get the flakier my memory is but I think @binhex added this feature a few months ago. There should be a post about it in the thread somewhere if you want to use google to search it.

From what I could fine, it picks up the first ovpn file in the folder alphabetically. Not an issue at all, was just wondering if there was any point in keeping all the port forward enabled end points in there or not :) 

 

Share this post


Link to post

I am having the same problem with PIA. None of the endpoints are working for me. Had to set STRICT_PORT_FORWARD='no' to get PIA to work.

Share this post


Link to post
12 minutes ago, ZipsServer said:

I am having the same problem with PIA. None of the endpoints are working for me. Had to set STRICT_PORT_FORWARD='no' to get PIA to work.

Yeah, was hoping it'd be fixed soon like the European ones were. I just didn't want to take the time and hassle of getting new certficates, etc... I turned mine off and honestly, haven't seen a difference in speed.

Share this post


Link to post
Posted (edited)

I woke up this morning and Sonarr, Radarr, Lidarr lost connectivity to their indexers. Yesterday I upgraded my modem to Arris SB8200 and did not touch any router settings. Currently, my docker containers route through delugeVPN using PIA for NZB only (which all worked for many months until today).  I was able to remedy the connection issue by setting VPN_ENABLED = no in the deluge settings. 

 

The only changes made to my setting or network is the new modem which uses docsis 3.1

 

Can't think of a reason why a new router would cause the VPN feature to stop working. 

I am running an old version of Unraid 6.6.7. Can't seem to upgrade successfully with my build. But, again this has been my setup for a very long time without issue. 

All dockers are up to date. 

I have attached my deluge settings and the sonarr log when trying to test the connection to an indexer. 

I'm not sure which logs would be most valuable. 

 

Any help is appreciated. 

Thanks!

 

**** Just Read All the Posts ****

deluge-settings.jpg

sonarr.txt

Edited by 1trkmind
I'm an idiot

Share this post


Link to post
2 hours ago, 1trkmind said:

I woke up this morning and Sonarr, Radarr, Lidarr lost connectivity to their indexers. Yesterday I upgraded my modem to Arris SB8200 and did not touch any router settings. Currently, my docker containers route through delugeVPN using PIA for NZB only (which all worked for many months until today).  I was able to remedy the connection issue by setting VPN_ENABLED = no in the deluge settings. 

 

The only changes made to my setting or network is the new modem which uses docsis 3.1

 

Can't think of a reason why a new router would cause the VPN feature to stop working. 

I am running an old version of Unraid 6.6.7. Can't seem to upgrade successfully with my build. But, again this has been my setup for a very long time without issue. 

All dockers are up to date. 

I have attached my deluge settings and the sonarr log when trying to test the connection to an indexer. 

I'm not sure which logs would be most valuable. 

 

Any help is appreciated. 

Thanks!

 

**** Just Read All the Posts ****

deluge-settings.jpg

sonarr.txt 955 kB · 0 downloads

What server are you trying to connect to? Canada has been down. Can you access your Deluge GUI? I couldn't because of this issue.

 

Try disabling STRICT-PORT_FORWARD, put "no" and then change VPN_ENABLED back to "yes". If that works, it's the port forwarding issue that I and others have been having.

Share this post


Link to post
36 minutes ago, TBoneStaek said:

What server are you trying to connect to? Canada has been down. Can you access your Deluge GUI? I couldn't because of this issue.

 

Try disabling STRICT-PORT_FORWARD, put "no" and then change VPN_ENABLED back to "yes". If that works, it's the port forwarding issue that I and others have been having.

I've tried several endpoints. Deluge won't load for me with vpn = yes and strict forward = no for any endpoints. No worries, I'll just turn off the vpn for now and give PIA some time to push a fix. 

Share this post


Link to post
18 minutes ago, 1trkmind said:

I've tried several endpoints. Deluge won't load for me with vpn = yes and strict forward = no for any endpoints. No worries, I'll just turn off the vpn for now and give PIA some time to push a fix. 

de-berlin working well at the moment.

Share this post


Link to post
7 hours ago, jonathanm said:

de-berlin working well at the moment.

Thanks!

Works wunderbar!

Share this post


Link to post

As of April 01 I wasn't able to find any NA servers working for PIA. Simply use a EU or another service other than PIA all together for the time being.

Share this post


Link to post

Imho I'm glad port forwarding on CA servers has been taken down, I have a feeling it was due to those endpoints leaking IP info as I've suspected.

Sent from my CLT-L09 using Tapatalk

Share this post


Link to post
16 hours ago, jonathanm said:

de-berlin working well at the moment.

After swapping the ovpn file, is there additional steps to restarting the docker for the change to take effect? 

Share this post


Link to post
1 hour ago, 1trkmind said:

After swapping the ovpn file, is there additional steps to restarting the docker for the change to take effect? 

Nope. Just restart the container and it should start working, check the container log for errors.

Share this post


Link to post

Roughly a week back my delugevpn container stopped receiving traffic completely. Looking in the logs I can't find anything out of the ordinary, but when starting the container the pending downloads I have seem to start for like a second, then they all drop down to 0kb/s and stop there.

 

How should I start to troubleshoot this?

Share this post


Link to post
20 minutes ago, 7thSon said:

Roughly a week back my delugevpn container stopped receiving traffic completely. Looking in the logs I can't find anything out of the ordinary, but when starting the container the pending downloads I have seem to start for like a second, then they all drop down to 0kb/s and stop there.

 

How should I start to troubleshoot this?

https://github.com/binhex/documentation/blob/master/docker/faq/help.md

Share this post


Link to post

First, to Binhex, thanks for all your great and hard work. Secondly, if these issues are with port forwarding because of PIA, has anyone switched to another VPN? and if so which one? Or should we just hang tight for a few days and give them time to resolve it? What is everyone thinking/doing?

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.