August 8, 20241 yr The docker menu doesn't show 'web ui' option anymore, only 'console', see picture. You can access the web ui by browsing to the ip:port you configured, but the option is gone?
August 15, 20241 yr Recently had to reboot the server and when everything was back up and running Sabnzbd was not started. Upon starting I instantly get a Execution Error code 403. I have search google and the forums but nothing is helping. I checked the log files and there is nothing that shows an error. Also my cache drive is not filled, about 150gb free space remaining. All the log files are small in size as well. I have tried rebooting the server again but that does not fix the problem. All of the other dockers are working fine, it's just the binhex-sabnzbd docker that will not start. Thank you for any help! Chris
August 16, 20241 yr Author 17 hours ago, cosmicrelish said: Recently had to reboot the server and when everything was back up and running Sabnzbd was not started. Upon starting I instantly get a Execution Error code 403. I have search google and the forums but nothing is helping. I checked the log files and there is nothing that shows an error. Also my cache drive is not filled, about 150gb free space remaining. All the log files are small in size as well. I have tried rebooting the server again but that does not fix the problem. All of the other dockers are working fine, it's just the binhex-sabnzbd docker that will not start. Thank you for any help! Chris try starting the container from the unraid terminal, so type `docker start <name of container>' and see what the error says, my money is that its a port conflict.
December 2, 20241 yr HI, I am using the Container without VPN. My question is about folders. How can I separate downloaded content from Configurations? I don´t get how to set this up. I have defined "Host Path 2" as: "/mnt/user/download/usenet", where it is supposed to store the downloaded content, however, it seems that the correct Variable is "/config". But there the standard Path is appdata and everything, including downloads, will be stored there. So, I now have changed this path to my "/mnt/user/download/usenet", but now it generates metadata here. Which I don´t want. -> How can I keep the metadata in the appdata folder AND have my downloads in my Share?
December 15, 20241 yr I'm now getting a message "This site can’t be reached" when trying to pull up the web UI. Also, other applications like sonarr are unable to connect to it. This has worked for years and I cannot find anything to indicate why it is not responding on that address. The docker page of Unraid says that it is started. 6 days later it started working - but 3 other dockers web UI stopped working. They all show as started, but I don't think they are working. Plex, for example, is not responding to Plex players on the network. Edited December 21, 20241 yr by jtcweb
December 16, 20241 yr Hi I can no longer access the webui for Sabnzdb. I just get: This site can’t be reached 192.168.1.10 refused to connect. I istalled the Unifi Controller docker which used the same port, so I changed Sab from 8080 and that may have caused the problem, not sure. I have since deleted Unifi and changed Sab back to 8080 but now I have the problem.... Anyone able to offer any advice? THX
December 16, 20241 yr 40 minutes ago, Exsol said: changed Sab back to 8080 And how did you change it?
December 16, 20241 yr Hey mate I changed it in the template (?). From the log, not sure if it helps: 024-12-15 22:06:03.937443 [info] Host is running unRAID 2024-12-15 22:06:04.140998 [info] System information: Linux f2783a8a370e 6.1.106-Unraid #1 SMP PREEMPT_DYNAMIC Wed Aug 21 23:36:07 PDT 2024 x86_64 GNU/Linux 2024-12-15 22:06:04.574866 [info] Image tags: BASE_RELEASE_TAG=2024110703,IMAGE_RELEASE_TAG=4.4.0-1-01 2024-12-15 22:06:04.831222 [info] PUID defined as '99' 2024-12-15 22:06:05.606871 [info] PGID defined as '100' 2024-12-15 22:06:06.401215 [info] UMASK defined as '000' 2024-12-15 22:06:06.715007 [info] Permissions already set for '/config' 2024-12-15 22:06:07.044151 [info] Deleting files in /tmp (non recursive)... 2024-12-15 22:06:07.883555 [info] SHARED_NETWORK not defined (via -e SHARED_NETWORK), defaulting to 'no' 2024-12-15 22:06:08.147273 [info] Starting Supervisor... 2024-12-15 22:06:09,514 INFO Included extra file "/etc/supervisor/conf.d/sabnzbd.conf" during parsing 2024-12-15 22:06:09,517 INFO Set uid to user 0 succeeded 2024-12-15 22:06:09,523 INFO supervisord started with pid 6 2024-12-15 22:06:10,526 INFO spawned: 'start-script' with pid 59 2024-12-15 22:06:10,527 INFO reaped unknown pid 7 (exit status 0) 2024-12-15 22:06:11,538 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2024-12-15 22:06:12,718 DEBG 'start-script' stderr output: /home/nobody/start.sh: line 10: 61 Illegal instruction python3 "${install_path}/SABnzbd.py" --config-file /config --server 0.0.0.0:8080 --https 8090 2024-12-15 22:06:12,731 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22758683520672 for <Subprocess at 22758670956976 with name start-script in state RUNNING> (stdout)> 2024-12-15 22:06:12,731 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22758669306672 for <Subprocess at 22758670956976 with name start-script in state RUNNING> (stderr)> 2024-12-15 22:06:12,731 WARN exited: start-script (exit status 132; not expected) 2024-12-15 22:06:12,732 DEBG received SIGCHLD indicating a child quit Edited December 16, 20241 yr by Exsol added info
December 16, 20241 yr Author 25 minutes ago, Exsol said: I just keep trying it hoping that it fixed itself. No luck so far.... what is the URL you are going to in your web browser?, if you are left clicking the docker container and selecting web ui it is possible its sending you to the wrong port number.
December 16, 20241 yr Hi there binhex I am left clicking the docker container ant this is my browser:
December 16, 20241 yr Author ok the url looks correct, can you try another browser and also try an incognito window.
December 16, 20241 yr I tried a Brave private window, Edge and Edge private. I should also mention that that I tried removing and reinstalling the docker... no joy. Thanks for jumping in here.
December 16, 20241 yr Author 59 minutes ago, Exsol said: I tried a Brave private window, Edge and Edge private. I should also mention that that I tried removing and reinstalling the docker... no joy. Thanks for jumping in here. OK i know this sounds a bit straw grasping here, but give your server a reboot, it wouldnt be the first time ive seen docker get its knickers in a knot after a port change. p.s. i have confirmed the image is working, so the issue is local to your setup.
December 16, 20241 yr Rebooted and no joy, unfortunately. I automatically assumed the problem was at my end. I have this knack of being the first person to experience weird problems that nobody has seen before... As I am new to UnRaid and dockers, is there a way to reinstall the docker completely from scratch?
December 16, 20241 yr Author 30 minutes ago, Exsol said: Rebooted and no joy, unfortunately. I automatically assumed the problem was at my end. I have this knack of being the first person to experience weird problems that nobody has seen before... As I am new to UnRaid and dockers, is there a way to reinstall the docker completely from scratch? there are two steps you can try:- 1. re-configure the template - to do this stop the container then left click and select 'remove' and confirm it. then at the bottom click on 'add container' and then from the 'template' select the sabnzbd template from the first section, do not select anything under 'user templates', fill in the details and apply. If step 1. doesn't fix it then go onto step 2.:- 2. re-create your config - to do this stop the container, then locate your /config folder for the container on your host and rename the folder name e.g. binhex-sabnzbd-old then start the container, this will create a brand new configuration in the original location.
December 16, 20241 yr Step 1. I Stopped and removed the container. When I went to 'add container', it wasn't available in the top sction. Very little was, in fact: So I had to choose from the User Templates and go to step 2. I feel awful having to say that still no joy: All other dockers work as they should. It is just this one and this is the only one I messed with when I tried Unifi but all I did was change the port number. Should I be worried about this line in the log: 2024-12-16 22:53:30,826 DEBG 'start-script' stderr output: /home/nobody/start.sh: line 10: 63 Illegal instruction python3 "${install_path}/SABnzbd.py" --config-file /config --server 0.0.0.0:8080 --https 8090 And what does a child quitting mean? That can't be good... 2024-12-16 22:53:30,828 DEBG received SIGCHLD indicating a child quit
December 17, 20241 yr FYI, I would love to know why this happened and how o fix it because I suspect that I will do it again to another docker at some point but in the meantime, I have installed binhex-nzbget and it is currently working for me. Thanks for trying binhex and please do let me know if you come up with any other ideas to try. Cheers
December 23, 20241 yr Last night Sabnzbd paused itself for the first time. I checked the logs and there was an error that my quota limit was reached and it was pausing. I went into config/switches and changed it to 100TB/day and it still hasn't restarted. I have over 40TB of storage left on the array so it's got plenty of space. I used the 'force' priority and they still won't begin downloading. Any idea what other quota there is that could be causing this paused state?
December 24, 20241 yr Usenet quota? Did you put a value in config Servers > Quota? Also, is it possible that you have a quota (daily limit) for you Usenet hosting, which might be hit and reported by SABnzbd?
December 27, 20241 yr When enabling tailscale (in unraid 7 rc2) it breaks this docker: Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2024-12-27 20:42:27.848045 [info] Host is running unRAID 2024-12-27 20:42:27.875767 [info] System information: Linux ad87d6021abb 6.6.66-Unraid #1 SMP PREEMPT_DYNAMIC Mon Dec 16 16:09:03 PST 2024 x86_64 GNU/Linux 2024-12-27 20:42:27.903309 [info] Image tags: BASE_RELEASE_TAG=2024110703,IMAGE_RELEASE_TAG=4.4.1-1-01 2024-12-27 20:42:27.934835 [info] PUID defined as '99' 2024-12-27 20:42:27.986736 [info] PGID defined as '100' 2024-12-27 20:42:28.031544 [info] UMASK defined as '000' 2024-12-27 20:42:28.061737 [info] Permissions already set for '/config' 2024-12-27 20:42:28.093931 [info] Deleting files in /tmp (non recursive)... 2024-12-27 20:42:28.184223 [info] SHARED_NETWORK not defined (via -e SHARED_NETWORK), defaulting to 'no' 2024-12-27 20:42:28.212182 [info] Starting Supervisor... 2024-12-27 20:42:28,418 INFO Included extra file "/etc/supervisor/conf.d/sabnzbd.conf" during parsing 2024-12-27 20:42:28,418 INFO Set uid to user 0 succeeded 2024-12-27 20:42:28,422 INFO supervisord started with pid 240 2024-12-27 20:42:29,424 INFO spawned: 'start-script' with pid 293 2024-12-27 20:42:29,424 INFO reaped unknown pid 241 (exit status 0) 2024-12-27 20:42:29,509 DEBG 'start-script' stdout output: Not all required Python modules are available, please check requirements.txt Missing module: sabctools You can read more at: https://sabnzbd.org/wiki/installation/install-off-modules If you still experience problems, remove all .pyc files in this folder and subfolders 2024-12-27 20:42:29,510 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2024-12-27 20:42:29,519 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 23088742217920 for <Subprocess at 23088742213552 with name start-script in state RUNNING> (stdout)> 2024-12-27 20:42:29,519 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 23088740811152 for <Subprocess at 23088742213552 with name start-script in state RUNNING> (stderr)> 2024-12-27 20:42:29,519 WARN exited: start-script (exit status 1; not expected) 2024-12-27 20:42:29,519 DEBG received SIGCHLD indicating a child quit simply unchecking tailscale fixes this issue. Seems like sabctools is no longer present when enabling TS?
January 21, 20251 yr I have mapped my 8080 port -> 6789 to avoid a conflict with qbittorent, but it still runs on 8080. When I look at the details I see: 8080 does indeed work, but why isn't it 6789 instead? My fix was to move qbittorrent instead and that works perfectly. Seems something is broken with this docker. Edited January 21, 20251 yr by lovingHDTV
January 21, 20251 yr Author 3 hours ago, lovingHDTV said: Seems something is broken with this docker. not at all, you just dont understand port mappings in docker, because this is running via 'bridge' network you only need to change the host port, the container port is left unchanged (and is hard coded in this case), this allows you run multiple containers as long as the host port is unique.
January 21, 20251 yr My network type is None as I run it through GlueTun or are you referring to a different network called bridge?
January 21, 20251 yr Author 5 minutes ago, lovingHDTV said: My network type is None as I run it through GlueTun or are you referring to a different network called bridge? The default network type for this container is the default docker 'bridge' as can be seen in the unraid template, in this mode it works as i previously described. If you are running this via a shared network such as gluetun or a vpn network from one of the vpn images i produce then you may then run into a container port clash if you have more than one container running on the same port inside of the shared network.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.