[Support] binhex - SABnzbdVPN


Recommended Posts

  • 2 weeks later...

Hi,

 

Hoping someone can help me--I've had binhex-sabnzbdvpn running for several months with no issues. As of yesterday, I can no longer load the docker. I get a generic "Unable to Connect" Firefox can’t establish a connection to the server a XXXX:8080.

 

Things I've Tried:

Start/Stop Docker

Restart Server

Remove docker and re-download/install

 

Any suggestions on how I can fix this?

Link to comment
2 hours ago, naralez said:

Hi,

 

Hoping someone can help me--I've had binhex-sabnzbdvpn running for several months with no issues. As of yesterday, I can no longer load the docker. I get a generic "Unable to Connect" Firefox can’t establish a connection to the server a XXXX:8080.

 

Things I've Tried:

Start/Stop Docker

Restart Server

Remove docker and re-download/install

 

Any suggestions on how I can fix this?

https://github.com/binhex/documentation/blob/master/docker/faq/help.md

Link to comment
12 hours ago, naralez said:

Hi,

 

Hoping someone can help me--I've had binhex-sabnzbdvpn running for several months with no issues. As of yesterday, I can no longer load the docker. I get a generic "Unable to Connect" Firefox can’t establish a connection to the server a XXXX:8080.

 

Things I've Tried:

Start/Stop Docker

Restart Server

Remove docker and re-download/install

 

Any suggestions on how I can fix this?

Solved. My credentials file was causing the problem.

Link to comment
  • 2 weeks later...

I'm sorry to have to post this here, I know I've asked before, but cannot fine that post, nor my answer.

 

SABnzbdVPN stopped working, it just won't connect to the container.  I suspect it has to do with PIA endpoint, but I cannot, for an hour of searching, find where or how to change it.

 

my DelugeVPN still works fine, so maybe that's not the issue at all.  Log file is here.

 

I'm stuck on what to try to get it working again.

 


2020-05-06 15:14:07,097 DEBG 'start-script' stdout output:
Wed May 6 15:14:07 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:14:07 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:14:07 2020 UDP link local: (not bound)
Wed May 6 15:14:07 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:15:07,021 DEBG 'start-script' stdout output:
Wed May 6 15:15:07 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:15:07 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:15:07 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:15:07 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:15:07 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:15:12,022 DEBG 'start-script' stdout output:
Wed May 6 15:15:12 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:15:12 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:15:12 2020 UDP link local: (not bound)
Wed May 6 15:15:12 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:16:12,260 DEBG 'start-script' stdout output:
Wed May 6 15:16:12 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:16:12 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:16:12 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:16:12 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:16:12 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:16:17,260 DEBG 'start-script' stdout output:
Wed May 6 15:16:17 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:16:17 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:16:17 2020 UDP link local: (not bound)
Wed May 6 15:16:17 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:17:17,038 DEBG 'start-script' stdout output:
Wed May 6 15:17:17 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:17:17 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:17:17 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:17:17 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:17:17 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:17:22,039 DEBG 'start-script' stdout output:
Wed May 6 15:17:22 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:17:22 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:17:22 2020 UDP link local: (not bound)
Wed May 6 15:17:22 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:18:22,268 DEBG 'start-script' stdout output:
Wed May 6 15:18:22 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:18:22 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:18:22 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:18:22 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:18:22 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:18:27,269 DEBG 'start-script' stdout output:
Wed May 6 15:18:27 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:18:27 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:18:27 2020 UDP link local: (not bound)
Wed May 6 15:18:27 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:19:27,390 DEBG 'start-script' stdout output:
Wed May 6 15:19:27 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:19:27 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:19:27 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:19:27 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:19:27 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:19:32,391 DEBG 'start-script' stdout output:
Wed May 6 15:19:32 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:19:32 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:19:32 2020 UDP link local: (not bound)
Wed May 6 15:19:32 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:20:33,094 DEBG 'start-script' stdout output:
Wed May 6 15:20:33 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:20:33 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:20:33 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:20:33 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:20:33 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:20:38,095 DEBG 'start-script' stdout output:
Wed May 6 15:20:38 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:20:38 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:20:38 2020 UDP link local: (not bound)
Wed May 6 15:20:38 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:21:38,291 DEBG 'start-script' stdout output:
Wed May 6 15:21:38 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:21:38 2020 SIGHUP[soft,ping-restart] received, process restarting

2020-05-06 15:21:38,291 DEBG 'start-script' stdout output:
Wed May 6 15:21:38 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:21:38 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:21:38 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:21:43,292 DEBG 'start-script' stdout output:
Wed May 6 15:21:43 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:21:43 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:21:43 2020 UDP link local: (not bound)
Wed May 6 15:21:43 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:22:43,907 DEBG 'start-script' stdout output:
Wed May 6 15:22:43 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:22:43 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:22:43 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:22:43 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:22:43 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:22:48,908 DEBG 'start-script' stdout output:
Wed May 6 15:22:48 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:22:48 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:22:48 2020 UDP link local: (not bound)
Wed May 6 15:22:48 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:23:48,229 DEBG 'start-script' stdout output:
Wed May 6 15:23:48 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:23:48 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:23:48 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:23:48 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:23:48 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:23:53,230 DEBG 'start-script' stdout output:
Wed May 6 15:23:53 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:23:53 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:23:53 2020 UDP link local: (not bound)
Wed May 6 15:23:53 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:24:53,072 DEBG 'start-script' stdout output:
Wed May 6 15:24:53 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:24:53 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:24:53 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:24:53 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:24:53 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:24:58,073 DEBG 'start-script' stdout output:
Wed May 6 15:24:58 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:24:58 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:24:58 2020 UDP link local: (not bound)
Wed May 6 15:24:58 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:25:58,240 DEBG 'start-script' stdout output:
Wed May 6 15:25:58 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:25:58 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:25:58 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:25:58 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:25:58 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:26:03,241 DEBG 'start-script' stdout output:
Wed May 6 15:26:03 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:26:03 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:26:03 2020 UDP link local: (not bound)
Wed May 6 15:26:03 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:27:03,874 DEBG 'start-script' stdout output:
Wed May 6 15:27:03 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:27:03 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:27:03 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:27:03 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:27:03 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:27:08,874 DEBG 'start-script' stdout output:
Wed May 6 15:27:08 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:27:08 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:27:08 2020 UDP link local: (not bound)
Wed May 6 15:27:08 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:28:03,935 WARN received SIGTERM indicating exit request
2020-05-06 15:28:03,935 DEBG killing watchdog-script (pid 159) with signal SIGTERM
2020-05-06 15:28:03,935 INFO waiting for start-script, watchdog-script to die
2020-05-06 15:28:03,982 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 140591226644416 for <Subprocess at 140591226643744 with name watchdog-script in state STOPPING> (stdout)>
2020-05-06 15:28:03,982 DEBG fd 15 closed, stopped monitoring <POutputDispatcher at 140591226687152 for <Subprocess at 140591226643744 with name watchdog-script in state STOPPING> (stderr)>
2020-05-06 15:28:03,982 INFO stopped: watchdog-script (terminated by SIGTERM)
2020-05-06 15:28:03,982 DEBG received SIGCHLD indicating a child quit
2020-05-06 15:28:03,983 DEBG killing start-script (pid 158) with signal SIGTERM
2020-05-06 15:28:04,983 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 140591226870128 for <Subprocess at 140591226869024 with name start-script in state STOPPING> (stdout)>
2020-05-06 15:28:04,983 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 140591226643648 for <Subprocess at 140591226869024 with name start-script in state STOPPING> (stderr)>
2020-05-06 15:28:04,983 INFO stopped: start-script (terminated by SIGTERM)
2020-05-06 15:28:04,983 DEBG received SIGCHLD indicating a child quit
Created by...
___. .__ .__
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > <
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2020-05-06 15:40:40.480612 [info] System information Linux cbdab7af0882 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux
2020-05-06 15:40:40.505757 [info] PUID defined as '99'
2020-05-06 15:40:40.532177 [info] PGID defined as '100'
2020-05-06 15:40:40.565229 [info] UMASK defined as '000'
2020-05-06 15:40:40.588270 [info] Permissions already set for volume mappings
2020-05-06 15:40:40.617154 [info] VPN_ENABLED defined as 'yes'
2020-05-06 15:40:40.649759 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/CA Montreal.ovpn
2020-05-06 15:40:40.690789 [info] VPN remote line defined as 'remote ca.privateinternetaccess.com 1198'
2020-05-06 15:40:40.715570 [info] VPN_REMOTE defined as 'ca.privateinternetaccess.com'
2020-05-06 15:40:40.742453 [info] VPN_PORT defined as '1198'
2020-05-06 15:40:40.770003 [info] VPN_PROTOCOL defined as 'udp'
2020-05-06 15:40:40.795206 [info] VPN_DEVICE_TYPE defined as 'tun0'
2020-05-06 15:40:40.818243 [info] VPN_PROV defined as 'pia'
2020-05-06 15:40:40.840904 [info] LAN_NETWORK defined as '192.168.1.0/24'
2020-05-06 15:40:40.863765 [info] NAME_SERVERS defined as '209.222.18.222,37.235.1.174,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4'
2020-05-06 15:40:40.886486 [info] VPN_USER defined as 'p6682965'
2020-05-06 15:40:40.911067 [info] VPN_PASS defined as 'sj6EtpzkL64Lz0T2C4yCGwJN'
2020-05-06 15:40:40.934049 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2020-05-06 15:40:40.956802 [info] ENABLE_PRIVOXY defined as 'no'
2020-05-06 15:40:40.982038 [info] ADDITIONAL_PORTS defined as '9081'
2020-05-06 15:40:41.014683 [info] Deleting files in /tmp (non recursive)...
2020-05-06 15:40:41.036782 [info] Starting Supervisor...
2020-05-06 15:40:41,262 INFO Included extra file "/etc/supervisor/conf.d/sabnzbdvpn.conf" during parsing
2020-05-06 15:40:41,262 INFO Set uid to user 0 succeeded
2020-05-06 15:40:41,264 INFO supervisord started with pid 11
2020-05-06 15:40:42,266 INFO spawned: 'start-script' with pid 156
2020-05-06 15:40:42,267 INFO spawned: 'watchdog-script' with pid 157
2020-05-06 15:40:42,267 INFO reaped unknown pid 12
2020-05-06 15:40:42,279 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2020-05-06 15:40:42,279 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2020-05-06 15:40:42,279 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2020-05-06 15:40:42,318 DEBG 'start-script' stdout output:
[info] Default route for container is 172.17.0.1

2020-05-06 15:40:42,321 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.222 to /etc/resolv.conf

2020-05-06 15:40:42,324 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2020-05-06 15:40:42,326 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2020-05-06 15:40:42,329 DEBG 'start-script' stdout output:
[info] Adding 8.8.8.8 to /etc/resolv.conf

2020-05-06 15:40:42,332 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.218 to /etc/resolv.conf

2020-05-06 15:40:42,335 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2020-05-06 15:40:42,337 DEBG 'start-script' stdout output:
[info] Adding 1.0.0.1 to /etc/resolv.conf

2020-05-06 15:40:42,340 DEBG 'start-script' stdout output:
[info] Adding 8.8.4.4 to /etc/resolv.conf

2020-05-06 15:40:43,096 DEBG 'start-script' stdout output:
[info] Docker network defined as 172.17.0.0/16

2020-05-06 15:40:43,099 DEBG 'start-script' stdout output:
[info] Adding 192.168.1.0/24 as route via docker eth0

2020-05-06 15:40:43,100 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2020-05-06 15:40:43,101 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0

2020-05-06 15:40:43,101 DEBG 'start-script' stdout output:
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.3

2020-05-06 15:40:43,101 DEBG 'start-script' stdout output:
192.168.1.0/24 via 172.17.0.1 dev eth0

2020-05-06 15:40:43,102 DEBG 'start-script' stdout output:
--------------------

2020-05-06 15:40:43,106 DEBG 'start-script' stdout output:
iptable_mangle 16384 2
ip_tables 24576 5 iptable_filter,iptable_nat,iptable_mangle

2020-05-06 15:40:43,106 DEBG 'start-script' stdout output:
[info] iptable_mangle support detected, adding fwmark for tables

2020-05-06 15:40:43,120 DEBG 'start-script' stdout output:
[info] Adding additional incoming port 9081 for eth0

2020-05-06 15:40:43,140 DEBG 'start-script' stdout output:
[info] Adding additional outgoing port 9081 for eth0

2020-05-06 15:40:43,147 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2020-05-06 15:40:43,148 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD DROP
-P OUTPUT DROP
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 9081 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 9081 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 9081 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 9081 -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT

2020-05-06 15:40:43,149 DEBG 'start-script' stdout output:
--------------------

2020-05-06 15:40:43,150 DEBG 'start-script' stdout output:
[info] Starting OpenVPN...

2020-05-06 15:40:43,176 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 WARNING: file 'credentials.conf' is group or others accessible

2020-05-06 15:40:43,176 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020

2020-05-06 15:40:43,176 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:40:43,177 DEBG 'start-script' stdout output:
[info] OpenVPN started

2020-05-06 15:40:43,180 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2020-05-06 15:40:43,182 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]23.206.172.19:1198

2020-05-06 15:40:43,183 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 UDP link local: (not bound)

2020-05-06 15:40:43,183 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 UDP link remote: [AF_INET]23.206.172.19:1198

2020-05-06 15:41:43,858 DEBG 'start-script' stdout output:
Wed May 6 15:41:43 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:41:43 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:41:43 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:41:43 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:41:43 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:41:48,858 DEBG 'start-script' stdout output:
Wed May 6 15:41:48 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:41:48 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]23.206.172.19:1198
Wed May 6 15:41:48 2020 UDP link local: (not bound)
Wed May 6 15:41:48 2020 UDP link remote: [AF_INET]23.206.172.19:1198

 

Link to comment
3 hours ago, binhex said:

Interesting, but why is binhex-delugevpn working just fine?  I believe I have them set the same.  Well, other than having to change one of them to use a different port, since, for some reason, they are both setup to use port 8118, which conflicts when I don't change one to 9118. 

 

The don't have all the same settings options, but those that are in both docker setups seem to be setup the same on my system, and SAB was working fine a few weeks ago (the last time I checked on it).

 

I literally copied the openvpn files from deluge to sab as a test, so they should be the exact same files in both folders.

 

This tells me it's not my ISP, nor my router.  Not sure what else it could be.

 

Finally; would it be possible for you to put a link to that FAQ in the first post of your docker threads on unRAID?  I literally spent an hour looking and could not find that FAQ.

 

Thanks again

sabnzbd.jpg

 

 

deluge.jpg

 

sabnzbd openvpn.jpg

deluge openvpn.jpg

Edited by JustinChase
Link to comment
On 5/7/2020 at 3:13 PM, JustinChase said:

Interesting, but why is binhex-delugevpn working just fine?  I believe I have them set the same.

i would double check this, i know you said you copied one from the other but make sure the ovpn files are the same, i suspect they probably arent, the main cause of this error is out of date or badly configured ovpn file.

Link to comment
On 5/7/2020 at 3:13 PM, JustinChase said:

Finally; would it be possible for you to put a link to that FAQ in the first post of your docker threads on unRAID?  I literally spent an hour looking and could not find that FAQ.

links to all the documentation for my images is always in the first post of every support thread, as well as linked in all the unraid templates.

Link to comment

I am able to get the docker to start, but I can't launch the web interface.  I have only recently decided to move over to SABnzbd on the unraid, having used it for years under windows. I installed the vanilla binhex-sabnzbd, and it worked just fine. Then I decided I'd try the vpn version.  It seems to connect just fine, but I get a site can't be reached page when trying to log into the web gui. Could this be a firewall/port issue?  I'm using slick VPN for reference.  I left the standard port assignments. from the documentation on github

Quote

"STRICT_PORT_FORWARD - If this is set to yes then you will be enforcing port forwarding when connected to an VPN remote endpoint for provider PIA. Again i would like to stress this only takes effect for PIA users only, if you're using another provider then you will need to setup the port forward yourself (speeds will be VERY slow without a working incoming port)."

Are we talking about port 8080, 8090, 8118? I'm not using PIA. Fortunately or unfortunately I'm using Google Wifi/Nest Routers, so they are sometimes a PITA and I vaguely wish I had a pfsense box set up

 

Here is my config:

 

Created by...
___. .__ .__
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > <
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2020-05-08 14:57:49.154202 [info] System information Linux b027c239c14e 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux
2020-05-08 14:57:49.176714 [info] PUID defined as '99'
2020-05-08 14:57:49.201512 [info] PGID defined as '100'
2020-05-08 14:57:49.259121 [info] UMASK defined as '000'
2020-05-08 14:57:49.280440 [info] Permissions already set for volume mappings
2020-05-08 14:57:49.304349 [info] VPN_ENABLED defined as 'yes'
2020-05-08 14:57:49.330041 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/gw1.ams3.slickvpn.com.ovpn
2020-05-08 14:57:49.370777 [info] VPN remote line defined as 'remote gw1.ams3.slickvpn.com 443 udp'
2020-05-08 14:57:49.392129 [info] VPN_REMOTE defined as 'gw1.ams3.slickvpn.com'
2020-05-08 14:57:49.413706 [info] VPN_PORT defined as '443'
2020-05-08 14:57:49.437582 [info] VPN_PROTOCOL defined as 'udp'
2020-05-08 14:57:49.458773 [info] VPN_DEVICE_TYPE defined as 'tun0'
2020-05-08 14:57:49.480582 [info] VPN_PROV defined as 'custom'
2020-05-08 14:57:49.501950 [info] LAN_NETWORK defined as '192.168.86.0/24'
2020-05-08 14:57:49.524735 [info] NAME_SERVERS defined as '209.222.18.222,84.200.69.80,37.235.1.174,1.1.1.1,209.222.18.218,37.235.1.177,84.200.70.40,1.0.0.1'
Created by...
___. .__ .__
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > <
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2020-05-08 14:57:49.154202 [info] System information Linux b027c239c14e 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux
2020-05-08 14:57:49.176714 [info] PUID defined as '99'
2020-05-08 14:57:49.201512 [info] PGID defined as '100'
2020-05-08 14:57:49.259121 [info] UMASK defined as '000'
2020-05-08 14:57:49.280440 [info] Permissions already set for volume mappings
2020-05-08 14:57:49.304349 [info] VPN_ENABLED defined as 'yes'
2020-05-08 14:57:49.330041 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/gw1.ams3.slickvpn.com.ovpn
2020-05-08 14:57:49.370777 [info] VPN remote line defined as 'remote gw1.ams3.slickvpn.com 443 udp'
2020-05-08 14:57:49.392129 [info] VPN_REMOTE defined as 'gw1.ams3.slickvpn.com'
2020-05-08 14:57:49.413706 [info] VPN_PORT defined as '443'
2020-05-08 14:57:49.437582 [info] VPN_PROTOCOL defined as 'udp'
2020-05-08 14:57:49.458773 [info] VPN_DEVICE_TYPE defined as 'tun0'
2020-05-08 14:57:49.480582 [info] VPN_PROV defined as 'custom'
2020-05-08 14:57:49.501950 [info] LAN_NETWORK defined as '192.168.86.0/24'
2020-05-08 14:57:49.524735 [info] NAME_SERVERS defined as '209.222.18.222,84.200.69.80,37.235.1.174,1.1.1.1,209.222.18.218,37.235.1.177,84.200.70.40,1.0.0.1'
2020-05-08 14:57:49.547608 [info] VPN_USER defined as '[email protected]'
2020-05-08 14:57:49.570497 [info] VPN_PASS defined as 'fartbag1@#'
2020-05-08 14:57:49.593863 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2020-05-08 14:57:49.616246 [info] ENABLE_PRIVOXY defined as 'no'
2020-05-08 14:57:49.637599 [info] ADDITIONAL_PORTS not defined (via -e ADDITIONAL_PORTS), skipping allow for custom incoming ports
2020-05-08 14:57:49.662669 [info] Deleting files in /tmp (non recursive)...
2020-05-08 14:57:49.683297 [info] Starting Supervisor...
2020-05-08 14:57:49,800 INFO Included extra file "/etc/supervisor/conf.d/sabnzbdvpn.conf" during parsing
2020-05-08 14:57:49,800 INFO Set uid to user 0 succeeded
2020-05-08 14:57:49,802 INFO supervisord started with pid 6
2020-05-08 14:57:50,804 INFO spawned: 'start-script' with pid 151
2020-05-08 14:57:50,806 INFO spawned: 'watchdog-script' with pid 152
2020-05-08 14:57:50,806 INFO reaped unknown pid 7
2020-05-08 14:57:50,810 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2020-05-08 14:57:50,810 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2020-05-08 14:57:50,810 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2020-05-08 14:57:50,815 DEBG 'start-script' stdout output:
[warn] Username contains characters which could cause authentication issues, please consider changing this if possible

2020-05-08 14:57:50,818 DEBG 'start-script' stdout output:
[warn] Password contains characters which could cause authentication issues, please consider changing this if possible

2020-05-08 14:57:50,851 DEBG 'start-script' stdout output:
[info] Default route for container is 172.17.0.1

2020-05-08 14:57:50,853 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.222 to /etc/resolv.conf

2020-05-08 14:57:50,856 DEBG 'start-script' stdout output:
[info] Adding 84.200.69.80 to /etc/resolv.conf

2020-05-08 14:57:50,858 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2020-05-08 14:57:50,861 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2020-05-08 14:57:50,863 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.218 to /etc/resolv.conf

2020-05-08 14:57:50,866 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2020-05-08 14:57:50,868 DEBG 'start-script' stdout output:
[info] Adding 84.200.70.40 to /etc/resolv.conf

2020-05-08 14:57:50,871 DEBG 'start-script' stdout output:
[info] Adding 1.0.0.1 to /etc/resolv.conf

2020-05-08 14:57:51,038 DEBG 'start-script' stdout output:
[info] Docker network defined as 172.17.0.0/16

2020-05-08 14:57:51,041 DEBG 'start-script' stdout output:
[info] Adding 192.168.86.0/24 as route via docker eth0

2020-05-08 14:57:51,042 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2020-05-08 14:57:51,043 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.2
192.168.86.0/24 via 172.17.0.1 dev eth0

2020-05-08 14:57:51,043 DEBG 'start-script' stdout output:
--------------------

2020-05-08 14:57:51,045 DEBG 'start-script' stdout output:
iptable_mangle 16384 1
ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle

2020-05-08 14:57:51,045 DEBG 'start-script' stdout output:
[info] iptable_mangle support detected, adding fwmark for tables

2020-05-08 14:57:51,076 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2020-05-08 14:57:51,077 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD DROP
-P OUTPUT DROP
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 443 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 443 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT

2020-05-08 14:57:51,077 DEBG 'start-script' stdout output:
--------------------

2020-05-08 14:57:51,078 DEBG 'start-script' stdout output:
[info] Starting OpenVPN...

2020-05-08 14:57:51,082 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 WARNING: file 'credentials.conf' is group or others accessible

Fri May 8 14:57:51 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
[info] OpenVPN started

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2020-05-08 14:57:51,084 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]151.236.14.29:443

2020-05-08 14:57:51,084 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 UDP link local: (not bound)
Fri May 8 14:57:51 2020 UDP link remote: [AF_INET]151.236.14.29:443

2020-05-08 14:57:51,038 DEBG 'start-script' stdout output:
[info] Docker network defined as 172.17.0.0/16

2020-05-08 14:57:51,041 DEBG 'start-script' stdout output:
[info] Adding 192.168.86.0/24 as route via docker eth0

2020-05-08 14:57:51,042 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2020-05-08 14:57:51,043 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.2
192.168.86.0/24 via 172.17.0.1 dev eth0

2020-05-08 14:57:51,043 DEBG 'start-script' stdout output:
--------------------

2020-05-08 14:57:51,045 DEBG 'start-script' stdout output:
iptable_mangle 16384 1
ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle

2020-05-08 14:57:51,045 DEBG 'start-script' stdout output:
[info] iptable_mangle support detected, adding fwmark for tables

2020-05-08 14:57:51,076 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2020-05-08 14:57:51,077 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD DROP
-P OUTPUT DROP
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 443 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 443 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT

2020-05-08 14:57:51,077 DEBG 'start-script' stdout output:
--------------------

2020-05-08 14:57:51,078 DEBG 'start-script' stdout output:
[info] Starting OpenVPN...

2020-05-08 14:57:51,082 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 WARNING: file 'credentials.conf' is group or others accessible

Fri May 8 14:57:51 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
[info] OpenVPN started

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2020-05-08 14:57:51,084 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]151.236.14.29:443

2020-05-08 14:57:51,084 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 UDP link local: (not bound)
Fri May 8 14:57:51 2020 UDP link remote: [AF_INET]151.236.14.29:443

 

1633013126_Annotation2020-05-08145316.thumb.png.67566f6e07e19fa79183360c5e4c98f0.png

Quote

 

 

Link to comment

I am new to Dockers and unRAID as a whole. I was able to set-up and install binhex-SABNZBD and load it far enough to add Newsgroup Ninja and test the connection and it indicated that it was successful (I will admit I forgot to input the advanced settings before hand). Ever since I got it loaded, I cannot get the Web UI to load. I am still able to verify the VPN is working, but I can't get the Web UI to load. Any ideas? 

Screen Shot 2020-05-12 at 10.49.12 PM.png

Link to comment

I've been working on this for a while, mostly just cleaning up/reorganizing the keys, port and paths to match what deluge has, so it was easier to compare (I wish there was an easy way to simply re-organize the existing entries).

 

I added yes|no as default to fields where that's the option and true|false to the debug field, and all those fields show an arrow button to let you just pick.

 

I'm not sure why the sabnzbdvpn container includes these keys, but delugevpn doesn't

 

VPN_OPTIONS

NAME_SERVERS

UMASK

PUID

PGID

ADDITIONAL_PORTS

 

I have no idea what would go in VPN_OPTIONS, and it remains blank

I removed the entry in NAME_SERVERS

I left UMASK, PUID & PGID with the values that were there

I have no need for additional ports, so it remains blank

 

I also re-created Host Port 3 to use 8100, so it wasn't the same as deluge, and I didn't have to change just the container path.

 

when I saved, I kept getting a duplicate /config error

 

I finally clicked on the show more settings line in blue at the bottom and found a hidden container path, and once I removed that, the container saved properly and started.

 

Viola!  it's working again.

 

TLDL; remove the NAME_SERVERS list from that field and all works again.

 

If there is some reason those need to be there, I'd love to know, but as of now, the GUI loads, and it seems to work fine again.

 

I don't know any way to confirm it's actually using the VPN with this change, but I do have it enabled, and per binhex, it will not load GUI if VPN isn't connected, so I assume it's all good now.

settings1.jpg

settings2.jpg

Link to comment
9 minutes ago, JustinChase said:

I'm not sure why the sabnzbdvpn container includes these keys, but delugevpn doesn't

 

VPN_OPTIONS

NAME_SERVERS

UMASK

PUID

PGID

ADDITIONAL_PORTS

err it does have all those env vars and more, you must have a VERY out of date template if they are missing those env vars.

 

10 minutes ago, JustinChase said:

I have no idea what would go in VPN_OPTIONS, and it remains blank

the correct decision, this is for advanced openvpn options, only use this if you know what you are doing.

11 minutes ago, JustinChase said:

I removed the entry in NAME_SERVERS

not such a good decision, this defines the name servers used when the tunnel is up, if you remove this then it will fall back to defaults.

12 minutes ago, JustinChase said:

I left UMASK, PUID & PGID with the values that were there

I have no need for additional ports, so it remains blank

fine and fine again.

12 minutes ago, JustinChase said:

TLDL; remove the NAME_SERVERS list from that field and all works again.

this is not the fix, trust me, more likely this is it:-

13 minutes ago, JustinChase said:

I finally clicked on the show more settings line in blue at the bottom and found a hidden container path, and once I removed that, the container saved properly and started.

 

Link to comment
32 minutes ago, binhex said:

err it does have all those env vars and more, you must have a VERY out of date template if they are missing those env vars.

 

the correct decision, this is for advanced openvpn options, only use this if you know what you are doing.

not such a good decision, this defines the name servers used when the tunnel is up, if you remove this then it will fall back to defaults.

fine and fine again.

this is not the fix, trust me, more likely this is it:-

 

yeah, i grabbed your deluge and sab containers right after docker was added to unraid.  I was unaware you'd expanded the template, and I don't know how to get the new template, or update the one I have.

 

I'd like to get the newest, but don't want to 'start over' having to reset everything.

 

I tested sab with the name servers in place, and it didn't work, removed them and it worked, added them and it didn't work, and finally removed them to get it to work.

 

After reading this, I added them back again to triple check before writing this, and now it is working with the name servers in there.

 

I don't think removing the /config path was the issue, since it wasn't even saving the config, and the container was actually getting orphaned until I found and removed the duplicate.  Then it saved and started, but i still couldn't get to the GUI.  Maybe it was just taking a long time.

 

Regardless, it's working, with the name servers, and downloading a small file as a test (I have really terribly slow internet).

 

If you know a good/easy way to get my template up to date with your latest, I'd like to do that.

 

i wonder if there is any way to do that automatically, or at least get notified when you make updates, since I had no idea until you said so.

 

Thanks again for all you do, and for your help.

 

 

***Forgot to ask; what is best practice for handling both sab and deluge having port 8118 in the template.  Once one is saved, the next give an error because that port is already used.  I gather that port is for privoxy, but I'm not sure how best to handle the conflict.  I assume just assign a container port, but it seems odd to force us to figure this out, since both templates have 8118 as the container template by default also.

Edited by JustinChase
forgot to ask
Link to comment
7 hours ago, JustinChase said:

If you know a good/easy way to get my template up to date with your latest, I'd like to do that.

easiest way is to expand all options (with advanced view showing) and screenshot the entire page.

 

then delete the existing 'My' template and finally go into CA and re-install, then re-enter the values you have in the screenshot, not ideal i know but thats the best way of doing it to my knowledge.

 

7 hours ago, JustinChase said:

Forgot to ask; what is best practice for handling both sab and deluge having port 8118 in the template.  Once one is saved, the next give an error because that port is already used.  I gather that port is for privoxy, but I'm not sure how best to handle the conflict.  I assume just assign a container port, but it seems odd to force us to figure this out, since both templates have 8118 as the container template by default also.

simply change the host side port to a port number that isnt in use, e.g. 8119, or remove the port entirely if you arent using privoxy for one of the containers.

 

whilst it might seem a bit odd to use the same port for multiple templates, not everybody is running multiple vpn containers, and having a different port for each docker image would be a support headache, not to mention a coding headache.

Link to comment
On 4/3/2020 at 9:53 AM, binhex said:

ok well it could simply be a vpn provider outage, to confirm its nothing else please do the following:-

https://github.com/binhex/documentation/blob/master/docker/faq/help.md

 

Purevpn is continuing to give troubles.... I just registered an openvpn account with MULLVAD. Worked out of the box.... Also does WIRESHARK by the way... Would be nice if we could get the option to use that within the container also ?

 

(EDIT) BTW... MULLVAD is -extremely fast... I am getting 60MB/s where purevpn would give me 5/6 MB/s for the same content..

Edited by Helmonder
Link to comment
18 hours ago, Helmonder said:

Also does WIRESHARK by the way... Would be nice if we could get the option to use that within the container also ?

ive had a few requests for wireguard, but its non trivial so im shying away from it for now.

 

18 hours ago, Helmonder said:

(EDIT) BTW... MULLVAD is -extremely fast... I am getting 60MB/s where purevpn would give me 5/6 MB/s for the same content..

yeah ive heard mullvad are pretty good, purevpn are crap from all accounts.

Link to comment

Well, I'm still having trouble.  Same thing with both binhex-delugevpn and binhex-sabnzbdvpn.  Works fine with the VPN_ENABLED set to "no".  Once I turn that setting to "yes", can't get to the gui.  It seems to start fine, gives me a green play sign on the docker tab.  But I cannot access the WebUI to see what's going on.

Link to comment
15 hours ago, mikesp18 said:

Well, I'm still having trouble.  Same thing with both binhex-delugevpn and binhex-sabnzbdvpn.  Works fine with the VPN_ENABLED set to "no".  Once I turn that setting to "yes", can't get to the gui.  It seems to start fine, gives me a green play sign on the docker tab.  But I cannot access the WebUI to see what's going on.

please do the following:-

https://github.com/binhex/documentation/blob/master/docker/faq/help.md

Link to comment

Hi.

 

In the description it says, "It also includes Privoxy to allow unfiltered access to index sites, to use Privoxy please point your application at "host ip:8118"

 

Can anyone tell me what that means?  I have been using it with PIA VPN (am getting ready to change so I went back to see if there were updates and noticed that description) and didn't know I could (should?) be using a proxy?

 

Link to comment
14 minutes ago, tucansam said:

Hi.

 

In the description it says, "It also includes Privoxy to allow unfiltered access to index sites, to use Privoxy please point your application at "host ip:8118"

 

Can anyone tell me what that means?  I have been using it with PIA VPN (am getting ready to change so I went back to see if there were updates and noticed that description) and didn't know I could (should?) be using a proxy?

 

Q3:-

https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md

Link to comment
13 minutes ago, mikesp18 said:

well this is def your issue:-

2020-05-21 10:46:51,069 DEBG 'start-script' stdout output:
Thu May 21 10:46:51 2020 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Thu May 21 10:46:51 2020 TLS Error: TLS handshake failed

2020-05-21 10:46:51,070 DEBG 'start-script' stdout output:

so i would get hold of the latest ovpn file from your vpn privider and all certificates as well and update what you have in /config/openvpn/ something is out of date or your vpn provider is having issues with the endpoint you are connecting to.

Link to comment
1 hour ago, binhex said:

well this is def your issue:-


2020-05-21 10:46:51,069 DEBG 'start-script' stdout output:
Thu May 21 10:46:51 2020 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Thu May 21 10:46:51 2020 TLS Error: TLS handshake failed

2020-05-21 10:46:51,070 DEBG 'start-script' stdout output:

so i would get hold of the latest ovpn file from your vpn privider and all certificates as well and update what you have in /config/openvpn/ something is out of date or your vpn provider is having issues with the endpoint you are connecting to.

Huh.  TheOVPN file is the one I downloaded from the provider, SlickVPN (should I just change VPN provider?) It's worth mentioning that I've been using this service under Windows for a while without major issues, and the username and password work fine.

 

There are not any certificates to download, like the PIA config files have, maybe this is a problem.  This is the info in the OVPN file. Does this help?

remote gw2.ams1.slickvpn.com 443 udp

# host/port of vpn server

# prompt for authentication
auth-user-pass credentials.conf

# equivalent to pull, tls-client
client

# redirect all outgoing traffic to the vpn gateway
redirect-gateway

# verify the server certificate for authenticity
remote-cert-tls server

cipher AES-256-CBC

proto udp
dev tun
keepalive 10 120
nobind

persist-key

# ssl certificate / key used for tls
#ca certs/ca.crt

<ca>
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
</ca>

 

Link to comment
20 minutes ago, mikesp18 said:

Huh.  TheOVPN file is the one I downloaded from the provider, SlickVPN (should I just change VPN provider?) It's worth mentioning that I've been using this service under Windows for a while without major issues, and the username and password work fine.

 

There are not any certificates to download, like the PIA config files have, maybe this is a problem.  This is the info in the OVPN file. Does this help?


remote gw2.ams1.slickvpn.com 443 udp

# host/port of vpn server

# prompt for authentication
auth-user-pass credentials.conf

# equivalent to pull, tls-client
client

# redirect all outgoing traffic to the vpn gateway
redirect-gateway

# verify the server certificate for authenticity
remote-cert-tls server

cipher AES-256-CBC

proto udp
dev tun
keepalive 10 120
nobind

persist-key

# ssl certificate / key used for tls
#ca certs/ca.crt

<ca>
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
</ca>

 

the tls error really is telling you that openvpn client is unable to communicate with the vpn endpoint you are attempting to connect to, if you can switch the endpoint/server you are connecting to then try that, else you will need to contact your vpn provider for further help, or simply switch vpn provider, mullvad are top dog at the mo.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.