Jump to content
binhex

[Support] binhex - SABnzbdVPN

1015 posts in this topic Last Reply

Recommended Posts

Posted (edited)
20 minutes ago, binhex said:

ok well it could simply be a vpn provider outage, to confirm its nothing else please do the following:-

https://github.com/binhex/documentation/blob/master/docker/faq/help.md

Herewith !

 

I read it gives an AUTH FAILED in there.. Password has not been changed in over a year though... Just changed it just to be sure, did not make a difference, new password also ended up in the credentials file in the openvpn folder.. So that part works..

 

supervisord.log

Edited by Helmonder

Share this post


Link to post
Posted (edited)
7 minutes ago, Helmonder said:

Herewith !

 

I read it gives an AUTH FAILED in there.. Password has not been changed in over a year though... Just changed it just to be sure, did not make a difference, new password also ended up in the credentials file in the openvpn folder.. So that part works..

 

supervisord.log 33.97 kB · 1 download

yep i see the multiple auth_failed messages, on the last retry in that log though its successful and i guess you can access the web ui and dl, correct?.

 

i would suspect the multiple authentication failures are due to a issue on the vpn provider end that looks to be intermittent, or they have just fixed it :-).

Edited by binhex

Share this post


Link to post
5 minutes ago, binhex said:

yep i see the multiple auth_failed messages, on the last retry in that log though its successful and i guess you can access the web ui and dl, correct?.

 

i would suspect the multiple authentication failures are due to a issue on the vpn provider end that looks to be intermittent, or they have just fixed it :-).

No... still not working... But if you think its on the side of the vpn provider I guess I just leave it alone for a couple of days, see if it comes back... Thanks very much for your help !

Share this post


Link to post
1 minute ago, Helmonder said:

But if you think its on the side of the vpn provider I guess I just leave it alone for a couple of days, see if it comes back

well lets put it this way, there have been no changes to this docker image in the last 20 days, and im assuming it has been working fine in this period, so im 99.999% sure its vpn provider.

Share this post


Link to post
29 minutes ago, binhex said:

well lets put it this way, there have been no changes to this docker image in the last 20 days, and im assuming it has been working fine in this period, so im 99.999% sure its vpn provider.

Thanks. I will keep you posted. VPN provider helpdesk does not understand the issue at all ;-)  Keeps asking for my settings page 🙂

Share this post


Link to post
8 minutes ago, Helmonder said:

Thanks. I will keep you posted. VPN provider helpdesk does not understand the issue at all ;-)  Keeps asking for my settings page 🙂

just tell them you arent using their (normally fairly shoddy) app and are running an OpenVPN client with their supplied OpenVPN configuration file and you are seeing random authentication failures as well as connectivity issues.

Share this post


Link to post
Posted (edited)

Ok. I'm currently banging my head trying to figure out a networking issue. - When VPN is enabled for this docker container, I lose all ability to access it via it's webpage (http://docker ip:8080; ICMP still works). However, once I turn VPN off, access is immediately restored. The only thing that has changed in my environment is that my wireless router was replaced today (my previous router died last night, and I had to run out to the store for a new one). - All of the IP configuration has been carried over and the CIDR notation is still correct in the container variables. I've even tried a different VPN provider to see if it was an issue with their split tunneling.

 

I'm also running into this same problem with "binhex-qbittorrentvpn" as well.

supervisord.log

Edited by MarkRMonaco

Share this post


Link to post
On 4/1/2020 at 7:04 PM, Squid said:

But are the PATHS on this sonarr set identically as on sab?  (The template paths, in particular the /data mapping)

Thank you...  I did have that /data path mapped to the NAS instead of the server...  now that I have changed it, it appears to be working now...  

Thanks a million for your help!

 

Share this post


Link to post
3 hours ago, MarkRMonaco said:

Ok. I'm currently banging my head trying to figure out a networking issue. - When VPN is enabled for this docker container, I lose all ability to access it via it's webpage (http://docker ip:8080; ICMP still works). However, once I turn VPN off, access is immediately restored. The only thing that has changed in my environment is that my wireless router was replaced today (my previous router died last night, and I had to run out to the store for a new one). - All of the IP configuration has been carried over and the CIDR notation is still correct in the container variables. I've even tried a different VPN provider to see if it was an issue with their split tunneling.

 

I'm also running into this same problem with "binhex-qbittorrentvpn" as well.

For my specific issue, I think it has to do with the ASUS router (RT-AX58U) that I purchased (I've seen some other VPN-related comments on Google). Since there is 3rd-party firmware support, I switched over to Merlin (who makes a modified stock firmware), which added additional support for router-level VPN connections. Previously, it was all or none. Now, I can route specific IP addresses through it (similar to how you can do it on pfSense), and have the rest of the traffic flow through the regular internet. - I'm just not 100% certain if all of the outbound traffic for those specific docker IP's are going through the tunnel (which I'll have to verify via terminal sessions).

Share this post


Link to post
Posted (edited)

I have a strange problem and I am not sure where to look next. I've just swapped to Unraid and have setup SAB docker with my VPN. Every hour it stops working and I have to either kill the openvpn process from within the docker image or restart it. 

 

You can see below at the timestamps of 13:27 everything is UP and fine. Then an hour later it looks like it does a reconnect of sorts, but from then on it doesn't work. I have deleted and re-downloaded the docker image and set it up again. I have rebooted the Unraid host as well.

 

I am looking for guidance on where I can try next? Thanks

2020-04-04 13:27:48,825 DEBG 'start-script' stdout output:
[info] Application does not require port forwarding or VPN provider is != pia, skipping incoming port assignment

2020-04-04 13:27:48,825 DEBG 'start-script' stdout output:
[info] Checking we can resolve name 'www.google.com' to address...

2020-04-04 13:27:48,884 DEBG 'start-script' stdout output:
[info] DNS operational, we can resolve name 'www.google.com' to address '216.58.210.36'

2020-04-04 13:27:48,900 DEBG 'start-script' stdout output:
[info] Application does not require external IP address, skipping external IP address detection

2020-04-04 14:34:02,767 DEBG 'start-script' stdout output:
Sat Apr  4 14:34:02 2020 TLS: new session incoming connection from [AF_INET]xxx.xxx.xxx.xxx:1194

2020-04-04 14:34:02,806 DEBG 'start-script' stdout output:
Sat Apr  4 14:34:02 2020 VERIFY OK: depth=1, CN=ChangeMe

2020-04-04 14:34:02,806 DEBG 'start-script' stdout output:
Sat Apr  4 14:34:02 2020 VERIFY KU OK
Sat Apr  4 14:34:02 2020 Validating certificate extended key usage
Sat Apr  4 14:34:02 2020 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Sat Apr  4 14:34:02 2020 VERIFY EKU OK
Sat Apr  4 14:34:02 2020 VERIFY X509NAME OK: CN=helios_5e754e9f-953e-4ac1-b9fc-b4ff9f056a4c
Sat Apr  4 14:34:02 2020 VERIFY OK: depth=0, CN=helios_5e754e9f-953e-4ac1-b9fc-b4ff9f056a4c

2020-04-04 14:34:02,830 DEBG 'start-script' stdout output:
Sat Apr  4 14:34:02 2020 TLS: move_session: dest=TM_ACTIVE src=TM_UNTRUSTED reinit_src=1

2020-04-04 14:34:02,831 DEBG 'start-script' stdout output:
Sat Apr  4 14:34:02 2020 TLS: tls_multi_process: untrusted session promoted to semi-trusted
Sat Apr  4 14:34:02 2020 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, 256 bit EC, curve: prime256v1

I'm also running the delugevpn docker and the log files show a slightly different message every hour. Connecting to the same VPN. It shows an inactivity timeout and a restart event.

Is this missing from the SAB container?

 

2020-04-02 19:29:34,440 DEBG 'start-script' stdout output:
[info] Attempting to get external IP using Name Server 'ns1.google.com'...

2020-04-02 19:29:34,689 DEBG 'start-script' stdout output:
[info] Successfully retrieved external IP address xxx.xxx.xxx.xxx

2020-04-02 20:29:34,474 DEBG 'start-script' stdout output:
Thu Apr  2 20:29:34 2020 [helios_5e754e9f-953e-4ac1-b9fc-b4ff9f056a4c] Inactivity timeout (--ping-restart), restarting

Actually ignore that, they both are doing the inactive timeout routing. Will continue digging!

 

 

Fix? Seems to be stable now I have set reneg-sec 0 in the server.conf for the OpenVPN server and restarted everything. Didn't see this before when I used an Ubuntu download server connecting up to the VPN, guess it's just one of those things!

 

Edited by MrFwibble

Share this post


Link to post
On 3/14/2020 at 1:41 PM, IrishBiker said:

Slightly off topic, I'm trying to get both arch-sabnzbdvpn and arch-sonarr running on OpenMediaVault 5. Both Dockers are running but I am having problems trying to get them to see the same download folder.

 

Sabnzbdvpn config:

 

/config >  /srv/dev-disk-by-label-OM5data/appdata/sabnzbdvpn/config

/data > /srv/dev-disk-by-label-OM5data/media

 

Sonarr config:

 

/data > /srv/dev-disk-by-label-OM5data/media

/config > /srv/dev-disk-by-label-OM5data/appdata/sonarr/config

/media > /srv/dev-disk-by-label-OM5data/media

 

Both apps start and seem to be working, however Sabnzbdvpn keeps creating the Downloads folder in config folder section and then of course Sonarr can't see it. Am I missing something? How can I get them to see the same folder.

Had this issue too, but finally figured it out. Despite you setting the folders in the Docker Setup, you also need to tell SAB to use the data folder in it's configuration menu because for some reason it is set by default to save to the config folder there. 

Share this post


Link to post
Posted (edited)
4 hours ago, masteraero said:

Had this issue too, but finally figured it out. Despite you setting the folders in the Docker Setup, you also need to tell SAB to use the data folder in it's configuration menu because for some reason it is set by default to save to the config folder there. 

 

Now this is scary! After weeks of swearing, uninstalling, reinstalling I only just got it working last night myself. As Masteraero reported you have to change the folder location not just in the docker template but in config section of sabnzbdvpn. Here’s what worked for me:

 

Sonarr, radarr and sabnzbdvpn all need the same data path. Initially BinHex’s example documentation threw me off, both sonarr and radarr both speak of media data looking at a sabnzbdvpn watched folder and sabnzbdvpn just speaks of data pointing to a totally different path.  

  

For me using OMV5 I used the following entry for data in all three dockers:

 

-v /srv/dev-disk-by-label-OM5data/data:/data \

(/srv/dev-disk-by-label- is the default path for usb mounted drives in OMV5)

 

Finally going into sabnzbdvpn: SABnzbd Config -> Folders and changing both the Complete and incomplete folder paths to start with /data/ got them all working and seeing each other.

 

Thanks to Masteraero for the confirmation and BinHex for the excellent dockers. By copy to BinHex your documentation for sabnzbdvpn under the AirVpn example points 3,4 and 5 speaks of delugevpn, should that not be sabnzbdvpn? 😊

 

Edited by IrishBiker
speeling

Share this post


Link to post
Posted (edited)
12 minutes ago, IrishBiker said:

By copy to BinHex your documentation for sabnzbdvpn under the AirVpn example points 3,4 and 5 speaks of delugevpn, should that not be sabnzbdvpn?

yes and no, really i should change it to *vpn, as it covers all of the vpn enabled docker images i have produced, delugevpn being the most popular.

edit - ahh i see what you mean the readme, not the documentation, got it! that does need to be changed

 

btw guys the fact you need to configure the app as well as configure the volume paths correctly is detailed in the documentaiton, Q4 from the following link end of that A4 for the juicy bit.:-

https://github.com/binhex/documentation/blob/master/docker/faq/unraid.md

Edited by binhex

Share this post


Link to post

Hi all,

 

I would like to move my current SABnzdb (Linuxserver) over to this VPN version, when setting up the template for binhex SABnzdbVPN can I simply change the appdata directory to the old linuxserver appdata and keep my current config etc?

Share this post


Link to post

Hi,

 

Hoping someone can help me--I've had binhex-sabnzbdvpn running for several months with no issues. As of yesterday, I can no longer load the docker. I get a generic "Unable to Connect" Firefox can’t establish a connection to the server a XXXX:8080.

 

Things I've Tried:

Start/Stop Docker

Restart Server

Remove docker and re-download/install

 

Any suggestions on how I can fix this?

Share this post


Link to post
2 hours ago, naralez said:

Hi,

 

Hoping someone can help me--I've had binhex-sabnzbdvpn running for several months with no issues. As of yesterday, I can no longer load the docker. I get a generic "Unable to Connect" Firefox can’t establish a connection to the server a XXXX:8080.

 

Things I've Tried:

Start/Stop Docker

Restart Server

Remove docker and re-download/install

 

Any suggestions on how I can fix this?

https://github.com/binhex/documentation/blob/master/docker/faq/help.md

Share this post


Link to post
12 hours ago, naralez said:

Hi,

 

Hoping someone can help me--I've had binhex-sabnzbdvpn running for several months with no issues. As of yesterday, I can no longer load the docker. I get a generic "Unable to Connect" Firefox can’t establish a connection to the server a XXXX:8080.

 

Things I've Tried:

Start/Stop Docker

Restart Server

Remove docker and re-download/install

 

Any suggestions on how I can fix this?

Solved. My credentials file was causing the problem.

Share this post


Link to post

I'm sorry to have to post this here, I know I've asked before, but cannot fine that post, nor my answer.

 

SABnzbdVPN stopped working, it just won't connect to the container.  I suspect it has to do with PIA endpoint, but I cannot, for an hour of searching, find where or how to change it.

 

my DelugeVPN still works fine, so maybe that's not the issue at all.  Log file is here.

 

I'm stuck on what to try to get it working again.

 


2020-05-06 15:14:07,097 DEBG 'start-script' stdout output:
Wed May 6 15:14:07 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:14:07 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:14:07 2020 UDP link local: (not bound)
Wed May 6 15:14:07 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:15:07,021 DEBG 'start-script' stdout output:
Wed May 6 15:15:07 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:15:07 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:15:07 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:15:07 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:15:07 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:15:12,022 DEBG 'start-script' stdout output:
Wed May 6 15:15:12 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:15:12 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:15:12 2020 UDP link local: (not bound)
Wed May 6 15:15:12 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:16:12,260 DEBG 'start-script' stdout output:
Wed May 6 15:16:12 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:16:12 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:16:12 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:16:12 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:16:12 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:16:17,260 DEBG 'start-script' stdout output:
Wed May 6 15:16:17 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:16:17 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:16:17 2020 UDP link local: (not bound)
Wed May 6 15:16:17 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:17:17,038 DEBG 'start-script' stdout output:
Wed May 6 15:17:17 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:17:17 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:17:17 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:17:17 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:17:17 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:17:22,039 DEBG 'start-script' stdout output:
Wed May 6 15:17:22 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:17:22 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:17:22 2020 UDP link local: (not bound)
Wed May 6 15:17:22 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:18:22,268 DEBG 'start-script' stdout output:
Wed May 6 15:18:22 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:18:22 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:18:22 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:18:22 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:18:22 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:18:27,269 DEBG 'start-script' stdout output:
Wed May 6 15:18:27 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:18:27 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:18:27 2020 UDP link local: (not bound)
Wed May 6 15:18:27 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:19:27,390 DEBG 'start-script' stdout output:
Wed May 6 15:19:27 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:19:27 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:19:27 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:19:27 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:19:27 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:19:32,391 DEBG 'start-script' stdout output:
Wed May 6 15:19:32 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:19:32 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:19:32 2020 UDP link local: (not bound)
Wed May 6 15:19:32 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:20:33,094 DEBG 'start-script' stdout output:
Wed May 6 15:20:33 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:20:33 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:20:33 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:20:33 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:20:33 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:20:38,095 DEBG 'start-script' stdout output:
Wed May 6 15:20:38 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:20:38 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:20:38 2020 UDP link local: (not bound)
Wed May 6 15:20:38 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:21:38,291 DEBG 'start-script' stdout output:
Wed May 6 15:21:38 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:21:38 2020 SIGHUP[soft,ping-restart] received, process restarting

2020-05-06 15:21:38,291 DEBG 'start-script' stdout output:
Wed May 6 15:21:38 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:21:38 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:21:38 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:21:43,292 DEBG 'start-script' stdout output:
Wed May 6 15:21:43 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:21:43 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:21:43 2020 UDP link local: (not bound)
Wed May 6 15:21:43 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:22:43,907 DEBG 'start-script' stdout output:
Wed May 6 15:22:43 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:22:43 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:22:43 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:22:43 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:22:43 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:22:48,908 DEBG 'start-script' stdout output:
Wed May 6 15:22:48 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:22:48 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:22:48 2020 UDP link local: (not bound)
Wed May 6 15:22:48 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:23:48,229 DEBG 'start-script' stdout output:
Wed May 6 15:23:48 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:23:48 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:23:48 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:23:48 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:23:48 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:23:53,230 DEBG 'start-script' stdout output:
Wed May 6 15:23:53 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:23:53 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:23:53 2020 UDP link local: (not bound)
Wed May 6 15:23:53 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:24:53,072 DEBG 'start-script' stdout output:
Wed May 6 15:24:53 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:24:53 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:24:53 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:24:53 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:24:53 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:24:58,073 DEBG 'start-script' stdout output:
Wed May 6 15:24:58 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:24:58 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:24:58 2020 UDP link local: (not bound)
Wed May 6 15:24:58 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:25:58,240 DEBG 'start-script' stdout output:
Wed May 6 15:25:58 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:25:58 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:25:58 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:25:58 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:25:58 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:26:03,241 DEBG 'start-script' stdout output:
Wed May 6 15:26:03 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:26:03 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:26:03 2020 UDP link local: (not bound)
Wed May 6 15:26:03 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:27:03,874 DEBG 'start-script' stdout output:
Wed May 6 15:27:03 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:27:03 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:27:03 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:27:03 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:27:03 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:27:08,874 DEBG 'start-script' stdout output:
Wed May 6 15:27:08 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:27:08 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198
Wed May 6 15:27:08 2020 UDP link local: (not bound)
Wed May 6 15:27:08 2020 UDP link remote: [AF_INET]92.123.7.113:1198

2020-05-06 15:28:03,935 WARN received SIGTERM indicating exit request
2020-05-06 15:28:03,935 DEBG killing watchdog-script (pid 159) with signal SIGTERM
2020-05-06 15:28:03,935 INFO waiting for start-script, watchdog-script to die
2020-05-06 15:28:03,982 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 140591226644416 for <Subprocess at 140591226643744 with name watchdog-script in state STOPPING> (stdout)>
2020-05-06 15:28:03,982 DEBG fd 15 closed, stopped monitoring <POutputDispatcher at 140591226687152 for <Subprocess at 140591226643744 with name watchdog-script in state STOPPING> (stderr)>
2020-05-06 15:28:03,982 INFO stopped: watchdog-script (terminated by SIGTERM)
2020-05-06 15:28:03,982 DEBG received SIGCHLD indicating a child quit
2020-05-06 15:28:03,983 DEBG killing start-script (pid 158) with signal SIGTERM
2020-05-06 15:28:04,983 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 140591226870128 for <Subprocess at 140591226869024 with name start-script in state STOPPING> (stdout)>
2020-05-06 15:28:04,983 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 140591226643648 for <Subprocess at 140591226869024 with name start-script in state STOPPING> (stderr)>
2020-05-06 15:28:04,983 INFO stopped: start-script (terminated by SIGTERM)
2020-05-06 15:28:04,983 DEBG received SIGCHLD indicating a child quit
Created by...
___. .__ .__
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > <
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2020-05-06 15:40:40.480612 [info] System information Linux cbdab7af0882 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux
2020-05-06 15:40:40.505757 [info] PUID defined as '99'
2020-05-06 15:40:40.532177 [info] PGID defined as '100'
2020-05-06 15:40:40.565229 [info] UMASK defined as '000'
2020-05-06 15:40:40.588270 [info] Permissions already set for volume mappings
2020-05-06 15:40:40.617154 [info] VPN_ENABLED defined as 'yes'
2020-05-06 15:40:40.649759 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/CA Montreal.ovpn
2020-05-06 15:40:40.690789 [info] VPN remote line defined as 'remote ca.privateinternetaccess.com 1198'
2020-05-06 15:40:40.715570 [info] VPN_REMOTE defined as 'ca.privateinternetaccess.com'
2020-05-06 15:40:40.742453 [info] VPN_PORT defined as '1198'
2020-05-06 15:40:40.770003 [info] VPN_PROTOCOL defined as 'udp'
2020-05-06 15:40:40.795206 [info] VPN_DEVICE_TYPE defined as 'tun0'
2020-05-06 15:40:40.818243 [info] VPN_PROV defined as 'pia'
2020-05-06 15:40:40.840904 [info] LAN_NETWORK defined as '192.168.1.0/24'
2020-05-06 15:40:40.863765 [info] NAME_SERVERS defined as '209.222.18.222,37.235.1.174,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4'
2020-05-06 15:40:40.886486 [info] VPN_USER defined as 'p6682965'
2020-05-06 15:40:40.911067 [info] VPN_PASS defined as 'sj6EtpzkL64Lz0T2C4yCGwJN'
2020-05-06 15:40:40.934049 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2020-05-06 15:40:40.956802 [info] ENABLE_PRIVOXY defined as 'no'
2020-05-06 15:40:40.982038 [info] ADDITIONAL_PORTS defined as '9081'
2020-05-06 15:40:41.014683 [info] Deleting files in /tmp (non recursive)...
2020-05-06 15:40:41.036782 [info] Starting Supervisor...
2020-05-06 15:40:41,262 INFO Included extra file "/etc/supervisor/conf.d/sabnzbdvpn.conf" during parsing
2020-05-06 15:40:41,262 INFO Set uid to user 0 succeeded
2020-05-06 15:40:41,264 INFO supervisord started with pid 11
2020-05-06 15:40:42,266 INFO spawned: 'start-script' with pid 156
2020-05-06 15:40:42,267 INFO spawned: 'watchdog-script' with pid 157
2020-05-06 15:40:42,267 INFO reaped unknown pid 12
2020-05-06 15:40:42,279 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2020-05-06 15:40:42,279 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2020-05-06 15:40:42,279 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2020-05-06 15:40:42,318 DEBG 'start-script' stdout output:
[info] Default route for container is 172.17.0.1

2020-05-06 15:40:42,321 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.222 to /etc/resolv.conf

2020-05-06 15:40:42,324 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2020-05-06 15:40:42,326 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2020-05-06 15:40:42,329 DEBG 'start-script' stdout output:
[info] Adding 8.8.8.8 to /etc/resolv.conf

2020-05-06 15:40:42,332 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.218 to /etc/resolv.conf

2020-05-06 15:40:42,335 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2020-05-06 15:40:42,337 DEBG 'start-script' stdout output:
[info] Adding 1.0.0.1 to /etc/resolv.conf

2020-05-06 15:40:42,340 DEBG 'start-script' stdout output:
[info] Adding 8.8.4.4 to /etc/resolv.conf

2020-05-06 15:40:43,096 DEBG 'start-script' stdout output:
[info] Docker network defined as 172.17.0.0/16

2020-05-06 15:40:43,099 DEBG 'start-script' stdout output:
[info] Adding 192.168.1.0/24 as route via docker eth0

2020-05-06 15:40:43,100 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2020-05-06 15:40:43,101 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0

2020-05-06 15:40:43,101 DEBG 'start-script' stdout output:
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.3

2020-05-06 15:40:43,101 DEBG 'start-script' stdout output:
192.168.1.0/24 via 172.17.0.1 dev eth0

2020-05-06 15:40:43,102 DEBG 'start-script' stdout output:
--------------------

2020-05-06 15:40:43,106 DEBG 'start-script' stdout output:
iptable_mangle 16384 2
ip_tables 24576 5 iptable_filter,iptable_nat,iptable_mangle

2020-05-06 15:40:43,106 DEBG 'start-script' stdout output:
[info] iptable_mangle support detected, adding fwmark for tables

2020-05-06 15:40:43,120 DEBG 'start-script' stdout output:
[info] Adding additional incoming port 9081 for eth0

2020-05-06 15:40:43,140 DEBG 'start-script' stdout output:
[info] Adding additional outgoing port 9081 for eth0

2020-05-06 15:40:43,147 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2020-05-06 15:40:43,148 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD DROP
-P OUTPUT DROP
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 9081 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 9081 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 9081 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 9081 -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT

2020-05-06 15:40:43,149 DEBG 'start-script' stdout output:
--------------------

2020-05-06 15:40:43,150 DEBG 'start-script' stdout output:
[info] Starting OpenVPN...

2020-05-06 15:40:43,176 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 WARNING: file 'credentials.conf' is group or others accessible

2020-05-06 15:40:43,176 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020

2020-05-06 15:40:43,176 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:40:43,177 DEBG 'start-script' stdout output:
[info] OpenVPN started

2020-05-06 15:40:43,180 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2020-05-06 15:40:43,182 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]23.206.172.19:1198

2020-05-06 15:40:43,183 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 UDP link local: (not bound)

2020-05-06 15:40:43,183 DEBG 'start-script' stdout output:
Wed May 6 15:40:43 2020 UDP link remote: [AF_INET]23.206.172.19:1198

2020-05-06 15:41:43,858 DEBG 'start-script' stdout output:
Wed May 6 15:41:43 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting
Wed May 6 15:41:43 2020 SIGHUP[soft,ping-restart] received, process restarting
Wed May 6 15:41:43 2020 WARNING: file 'credentials.conf' is group or others accessible
Wed May 6 15:41:43 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020
Wed May 6 15:41:43 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-06 15:41:48,858 DEBG 'start-script' stdout output:
Wed May 6 15:41:48 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed May 6 15:41:48 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]23.206.172.19:1198
Wed May 6 15:41:48 2020 UDP link local: (not bound)
Wed May 6 15:41:48 2020 UDP link remote: [AF_INET]23.206.172.19:1198

 

Share this post


Link to post
14 hours ago, JustinChase said:

2020-05-06 15:41:43,858 DEBG 'start-script' stdout output: Wed May 6 15:41:43 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:41:43 2020 SIGHUP[soft,ping-restart] received, process restarting

 

see q17 from the following link:- https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md

Share this post


Link to post
Posted (edited)
3 hours ago, binhex said:

Interesting, but why is binhex-delugevpn working just fine?  I believe I have them set the same.  Well, other than having to change one of them to use a different port, since, for some reason, they are both setup to use port 8118, which conflicts when I don't change one to 9118. 

 

The don't have all the same settings options, but those that are in both docker setups seem to be setup the same on my system, and SAB was working fine a few weeks ago (the last time I checked on it).

 

I literally copied the openvpn files from deluge to sab as a test, so they should be the exact same files in both folders.

 

This tells me it's not my ISP, nor my router.  Not sure what else it could be.

 

Finally; would it be possible for you to put a link to that FAQ in the first post of your docker threads on unRAID?  I literally spent an hour looking and could not find that FAQ.

 

Thanks again

sabnzbd.jpg

 

 

deluge.jpg

 

sabnzbd openvpn.jpg

deluge openvpn.jpg

Edited by JustinChase

Share this post


Link to post
On 5/7/2020 at 3:13 PM, JustinChase said:

Interesting, but why is binhex-delugevpn working just fine?  I believe I have them set the same.

i would double check this, i know you said you copied one from the other but make sure the ovpn files are the same, i suspect they probably arent, the main cause of this error is out of date or badly configured ovpn file.

Share this post


Link to post
On 5/7/2020 at 3:13 PM, JustinChase said:

Finally; would it be possible for you to put a link to that FAQ in the first post of your docker threads on unRAID?  I literally spent an hour looking and could not find that FAQ.

links to all the documentation for my images is always in the first post of every support thread, as well as linked in all the unraid templates.

Share this post


Link to post

I am able to get the docker to start, but I can't launch the web interface.  I have only recently decided to move over to SABnzbd on the unraid, having used it for years under windows. I installed the vanilla binhex-sabnzbd, and it worked just fine. Then I decided I'd try the vpn version.  It seems to connect just fine, but I get a site can't be reached page when trying to log into the web gui. Could this be a firewall/port issue?  I'm using slick VPN for reference.  I left the standard port assignments. from the documentation on github

Quote

"STRICT_PORT_FORWARD - If this is set to yes then you will be enforcing port forwarding when connected to an VPN remote endpoint for provider PIA. Again i would like to stress this only takes effect for PIA users only, if you're using another provider then you will need to setup the port forward yourself (speeds will be VERY slow without a working incoming port)."

Are we talking about port 8080, 8090, 8118? I'm not using PIA. Fortunately or unfortunately I'm using Google Wifi/Nest Routers, so they are sometimes a PITA and I vaguely wish I had a pfsense box set up

 

Here is my config:

 

Created by...
___. .__ .__
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > <
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2020-05-08 14:57:49.154202 [info] System information Linux b027c239c14e 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux
2020-05-08 14:57:49.176714 [info] PUID defined as '99'
2020-05-08 14:57:49.201512 [info] PGID defined as '100'
2020-05-08 14:57:49.259121 [info] UMASK defined as '000'
2020-05-08 14:57:49.280440 [info] Permissions already set for volume mappings
2020-05-08 14:57:49.304349 [info] VPN_ENABLED defined as 'yes'
2020-05-08 14:57:49.330041 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/gw1.ams3.slickvpn.com.ovpn
2020-05-08 14:57:49.370777 [info] VPN remote line defined as 'remote gw1.ams3.slickvpn.com 443 udp'
2020-05-08 14:57:49.392129 [info] VPN_REMOTE defined as 'gw1.ams3.slickvpn.com'
2020-05-08 14:57:49.413706 [info] VPN_PORT defined as '443'
2020-05-08 14:57:49.437582 [info] VPN_PROTOCOL defined as 'udp'
2020-05-08 14:57:49.458773 [info] VPN_DEVICE_TYPE defined as 'tun0'
2020-05-08 14:57:49.480582 [info] VPN_PROV defined as 'custom'
2020-05-08 14:57:49.501950 [info] LAN_NETWORK defined as '192.168.86.0/24'
2020-05-08 14:57:49.524735 [info] NAME_SERVERS defined as '209.222.18.222,84.200.69.80,37.235.1.174,1.1.1.1,209.222.18.218,37.235.1.177,84.200.70.40,1.0.0.1'
Created by...
___. .__ .__
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > <
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2020-05-08 14:57:49.154202 [info] System information Linux b027c239c14e 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux
2020-05-08 14:57:49.176714 [info] PUID defined as '99'
2020-05-08 14:57:49.201512 [info] PGID defined as '100'
2020-05-08 14:57:49.259121 [info] UMASK defined as '000'
2020-05-08 14:57:49.280440 [info] Permissions already set for volume mappings
2020-05-08 14:57:49.304349 [info] VPN_ENABLED defined as 'yes'
2020-05-08 14:57:49.330041 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/gw1.ams3.slickvpn.com.ovpn
2020-05-08 14:57:49.370777 [info] VPN remote line defined as 'remote gw1.ams3.slickvpn.com 443 udp'
2020-05-08 14:57:49.392129 [info] VPN_REMOTE defined as 'gw1.ams3.slickvpn.com'
2020-05-08 14:57:49.413706 [info] VPN_PORT defined as '443'
2020-05-08 14:57:49.437582 [info] VPN_PROTOCOL defined as 'udp'
2020-05-08 14:57:49.458773 [info] VPN_DEVICE_TYPE defined as 'tun0'
2020-05-08 14:57:49.480582 [info] VPN_PROV defined as 'custom'
2020-05-08 14:57:49.501950 [info] LAN_NETWORK defined as '192.168.86.0/24'
2020-05-08 14:57:49.524735 [info] NAME_SERVERS defined as '209.222.18.222,84.200.69.80,37.235.1.174,1.1.1.1,209.222.18.218,37.235.1.177,84.200.70.40,1.0.0.1'
2020-05-08 14:57:49.547608 [info] VPN_USER defined as '10278850@slickvpn.com'
2020-05-08 14:57:49.570497 [info] VPN_PASS defined as 'fartbag1@#'
2020-05-08 14:57:49.593863 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2020-05-08 14:57:49.616246 [info] ENABLE_PRIVOXY defined as 'no'
2020-05-08 14:57:49.637599 [info] ADDITIONAL_PORTS not defined (via -e ADDITIONAL_PORTS), skipping allow for custom incoming ports
2020-05-08 14:57:49.662669 [info] Deleting files in /tmp (non recursive)...
2020-05-08 14:57:49.683297 [info] Starting Supervisor...
2020-05-08 14:57:49,800 INFO Included extra file "/etc/supervisor/conf.d/sabnzbdvpn.conf" during parsing
2020-05-08 14:57:49,800 INFO Set uid to user 0 succeeded
2020-05-08 14:57:49,802 INFO supervisord started with pid 6
2020-05-08 14:57:50,804 INFO spawned: 'start-script' with pid 151
2020-05-08 14:57:50,806 INFO spawned: 'watchdog-script' with pid 152
2020-05-08 14:57:50,806 INFO reaped unknown pid 7
2020-05-08 14:57:50,810 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2020-05-08 14:57:50,810 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2020-05-08 14:57:50,810 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2020-05-08 14:57:50,815 DEBG 'start-script' stdout output:
[warn] Username contains characters which could cause authentication issues, please consider changing this if possible

2020-05-08 14:57:50,818 DEBG 'start-script' stdout output:
[warn] Password contains characters which could cause authentication issues, please consider changing this if possible

2020-05-08 14:57:50,851 DEBG 'start-script' stdout output:
[info] Default route for container is 172.17.0.1

2020-05-08 14:57:50,853 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.222 to /etc/resolv.conf

2020-05-08 14:57:50,856 DEBG 'start-script' stdout output:
[info] Adding 84.200.69.80 to /etc/resolv.conf

2020-05-08 14:57:50,858 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2020-05-08 14:57:50,861 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2020-05-08 14:57:50,863 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.218 to /etc/resolv.conf

2020-05-08 14:57:50,866 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2020-05-08 14:57:50,868 DEBG 'start-script' stdout output:
[info] Adding 84.200.70.40 to /etc/resolv.conf

2020-05-08 14:57:50,871 DEBG 'start-script' stdout output:
[info] Adding 1.0.0.1 to /etc/resolv.conf

2020-05-08 14:57:51,038 DEBG 'start-script' stdout output:
[info] Docker network defined as 172.17.0.0/16

2020-05-08 14:57:51,041 DEBG 'start-script' stdout output:
[info] Adding 192.168.86.0/24 as route via docker eth0

2020-05-08 14:57:51,042 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2020-05-08 14:57:51,043 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.2
192.168.86.0/24 via 172.17.0.1 dev eth0

2020-05-08 14:57:51,043 DEBG 'start-script' stdout output:
--------------------

2020-05-08 14:57:51,045 DEBG 'start-script' stdout output:
iptable_mangle 16384 1
ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle

2020-05-08 14:57:51,045 DEBG 'start-script' stdout output:
[info] iptable_mangle support detected, adding fwmark for tables

2020-05-08 14:57:51,076 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2020-05-08 14:57:51,077 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD DROP
-P OUTPUT DROP
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 443 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 443 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT

2020-05-08 14:57:51,077 DEBG 'start-script' stdout output:
--------------------

2020-05-08 14:57:51,078 DEBG 'start-script' stdout output:
[info] Starting OpenVPN...

2020-05-08 14:57:51,082 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 WARNING: file 'credentials.conf' is group or others accessible

Fri May 8 14:57:51 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
[info] OpenVPN started

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2020-05-08 14:57:51,084 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]151.236.14.29:443

2020-05-08 14:57:51,084 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 UDP link local: (not bound)
Fri May 8 14:57:51 2020 UDP link remote: [AF_INET]151.236.14.29:443

2020-05-08 14:57:51,038 DEBG 'start-script' stdout output:
[info] Docker network defined as 172.17.0.0/16

2020-05-08 14:57:51,041 DEBG 'start-script' stdout output:
[info] Adding 192.168.86.0/24 as route via docker eth0

2020-05-08 14:57:51,042 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2020-05-08 14:57:51,043 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.2
192.168.86.0/24 via 172.17.0.1 dev eth0

2020-05-08 14:57:51,043 DEBG 'start-script' stdout output:
--------------------

2020-05-08 14:57:51,045 DEBG 'start-script' stdout output:
iptable_mangle 16384 1
ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle

2020-05-08 14:57:51,045 DEBG 'start-script' stdout output:
[info] iptable_mangle support detected, adding fwmark for tables

2020-05-08 14:57:51,076 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2020-05-08 14:57:51,077 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD DROP
-P OUTPUT DROP
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 443 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 443 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8080 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8090 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8090 -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT

2020-05-08 14:57:51,077 DEBG 'start-script' stdout output:
--------------------

2020-05-08 14:57:51,078 DEBG 'start-script' stdout output:
[info] Starting OpenVPN...

2020-05-08 14:57:51,082 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 WARNING: file 'credentials.conf' is group or others accessible

Fri May 8 14:57:51 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
[info] OpenVPN started

2020-05-08 14:57:51,083 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2020-05-08 14:57:51,084 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]151.236.14.29:443

2020-05-08 14:57:51,084 DEBG 'start-script' stdout output:
Fri May 8 14:57:51 2020 UDP link local: (not bound)
Fri May 8 14:57:51 2020 UDP link remote: [AF_INET]151.236.14.29:443

 

1633013126_Annotation2020-05-08145316.thumb.png.67566f6e07e19fa79183360c5e4c98f0.png

Quote

 

 

Share this post


Link to post

I am new to Dockers and unRAID as a whole. I was able to set-up and install binhex-SABNZBD and load it far enough to add Newsgroup Ninja and test the connection and it indicated that it was successful (I will admit I forgot to input the advanced settings before hand). Ever since I got it loaded, I cannot get the Web UI to load. I am still able to verify the VPN is working, but I can't get the Web UI to load. Any ideas? 

Screen Shot 2020-05-12 at 10.49.12 PM.png

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.