RichJacot Posted January 31, 2022 Share Posted January 31, 2022 Plex seems to be working fine and I haven't gotten any complaints from my family accessing it remotely...but I was looking through the logs of all of my dockers and found the below in Plex's. I've google searched for the DEBG blah blah no such file or directory error but can't seem to find anything helpful. I check my container config. (even advanced view) and I can't find where "plexmediaserver" is referenced so I'm not sure why Plex is looking for it. Does anyone happen to know what might be causing this and how to correct it? I've included all of the log entries for 1/30 below. TIA 2022-01-30 04:06:11,374 DEBG 'plexmediaserver' stderr output: __code__:194: FutureWarning: The behavior of this method will change in future versions. Use specific 'len(elem)' or 'elem is not None' test instead. 2022-01-30 04:15:04,011 DEBG 'plexmediaserver' stderr output: /usr/lib/plexmediaserver/Resources/Plug-ins-f11334058/LocalMedia.bundle/Contents/Libraries/Shared/mutagen/_id3frames.py:125: ID3Warning: Leftover data: WORS: 'http://tolomada.heavenforum.com/' (from '\x00http://tolomada.heavenforum.com/') ID3Warning) 2022-01-30 04:22:18,179 DEBG 'plexmediaserver' stderr output: ERROR: Error decoding audio frame (Invalid data found when processing input) ERROR: Not enough audio data 2022-01-30 04:22:18,185 DEBG 'plexmediaserver' stderr output: ERROR: Error decoding audio frame (Invalid data found when processing input) ERROR: Not enough audio data 2022-01-30 04:22:30,364 DEBG 'plexmediaserver' stderr output: ERROR: Error decoding audio frame (Invalid data found when processing input) ERROR: Not enough audio data 2022-01-30 04:22:30,372 DEBG 'plexmediaserver' stderr output: ERROR: Error decoding audio frame (Invalid data found when processing input) ERROR: Not enough audio data 2022-01-30 18:15:22,319 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 18:15:29,557 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 18:15:29,558 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:03:13,457 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:03:13,499 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:08:30,611 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:08:30,650 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:08:39,964 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:08:40,132 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:10:20,666 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:10:20,723 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-31 12:35:51,536 DEBG 'plexmediaserver' stderr output: connect: Operation timed out Quote Link to comment
postersyndrome Posted February 5, 2022 Share Posted February 5, 2022 Last week, I woke up to my Plex Server not starting. After a bit of Googling, I copied the appdata folder, deleted the binhex-plexpass docker and reinstalled it, restoring the appdata folder. I have restored the paths for my media, and all of that appears to be working. At some point in the process, my ability to transcode to the iGPU was broken and I have been unable to restore it. I no longer have the /dev/dri folder, I have attempted to go back through the process of enabling the iGPU but that folder is not being found no matter what I try. Has anyone else experienced any of this? Any assistance would be greatly appreciated. Thank you. Quote Link to comment
RichJacot Posted February 6, 2022 Share Posted February 6, 2022 On 1/31/2022 at 2:58 PM, RichJacot said: Plex seems to be working fine and I haven't gotten any complaints from my family accessing it remotely...but I was looking through the logs of all of my dockers and found the below in Plex's. I've google searched for the DEBG blah blah no such file or directory error but can't seem to find anything helpful. I check my container config. (even advanced view) and I can't find where "plexmediaserver" is referenced so I'm not sure why Plex is looking for it. Does anyone happen to know what might be causing this and how to correct it? I've included all of the log entries for 1/30 below. TIA 2022-01-30 04:06:11,374 DEBG 'plexmediaserver' stderr output: __code__:194: FutureWarning: The behavior of this method will change in future versions. Use specific 'len(elem)' or 'elem is not None' test instead. 2022-01-30 04:15:04,011 DEBG 'plexmediaserver' stderr output: /usr/lib/plexmediaserver/Resources/Plug-ins-f11334058/LocalMedia.bundle/Contents/Libraries/Shared/mutagen/_id3frames.py:125: ID3Warning: Leftover data: WORS: 'http://tolomada.heavenforum.com/' (from '\x00http://tolomada.heavenforum.com/') ID3Warning) 2022-01-30 04:22:18,179 DEBG 'plexmediaserver' stderr output: ERROR: Error decoding audio frame (Invalid data found when processing input) ERROR: Not enough audio data 2022-01-30 04:22:18,185 DEBG 'plexmediaserver' stderr output: ERROR: Error decoding audio frame (Invalid data found when processing input) ERROR: Not enough audio data 2022-01-30 04:22:30,364 DEBG 'plexmediaserver' stderr output: ERROR: Error decoding audio frame (Invalid data found when processing input) ERROR: Not enough audio data 2022-01-30 04:22:30,372 DEBG 'plexmediaserver' stderr output: ERROR: Error decoding audio frame (Invalid data found when processing input) ERROR: Not enough audio data 2022-01-30 18:15:22,319 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 18:15:29,557 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 18:15:29,558 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:03:13,457 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:03:13,499 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:08:30,611 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:08:30,650 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:08:39,964 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:08:40,132 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:10:20,666 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-30 19:10:20,723 DEBG 'plexmediaserver' stderr output: Unable to open: No such file or directory (2) 2022-01-31 12:35:51,536 DEBG 'plexmediaserver' stderr output: connect: Operation timed out Anyone? Quote Link to comment
binhex Posted February 6, 2022 Author Share Posted February 6, 2022 On 1/31/2022 at 8:58 PM, RichJacot said: I check my container config. (even advanced view) and I can't find where "plexmediaserver" is referenced no idea whats causing the no such file or directory errors but the plexmediaserver is the name of the 'program' which kicked off the start of plex media server and is being managed by supervisord, for the errors you are best asking on the official plex forums. Quote Link to comment
postersyndrome Posted February 12, 2022 Share Posted February 12, 2022 On 2/5/2022 at 2:54 PM, Pks6601 said: Last week, I woke up to my Plex Server not starting. After a bit of Googling, I copied the appdata folder, deleted the binhex-plexpass docker and reinstalled it, restoring the appdata folder. I have restored the paths for my media, and all of that appears to be working. At some point in the process, my ability to transcode to the iGPU was broken and I have been unable to restore it. I no longer have the /dev/dri folder, I have attempted to go back through the process of enabling the iGPU but that folder is not being found no matter what I try. Has anyone else experienced any of this? Any assistance would be greatly appreciated. Thank you. Apparently, I'm an idiot. I forgot that I moved the HDMI dummy plug for some reason. After making sure that all of the ports that should have plugs in them did, installing and enabling went perfectly. Good to have it all back the way it was. Moral of the story: Check all the stupid stuff you are sure isn't the problem! Quote Link to comment
migueldias Posted March 3, 2022 Share Posted March 3, 2022 Hi all. My Plex docker suddenly stopped working today at 6 am. Looking at the logs it seems related to the SubZero plugin, which doesn't even work anymore and I have since switched to Bazaar. My krusader docker also stopped working. It runs and I can access the GUI but it won't open a file explorer window. I then checked the results of the parity check and one disk came up with 5000+ errors. This is a disk with almost 6 years of power-on time. I added the Plex logs and the SMART data file for the disk I have mentioned. Also added the krusader logs for good measure. I think it's all related to the faulty disk, and the way to go is to shut the server off, get a replacement HDD and rebuild the array. I'd like to know your opinion as well. Thank you all for your time. tower-smart-20220303-0941.zip Log for_ binhex-plex.html Log for_ binhex-krusader.html Quote Link to comment
Stormblessed21 Posted March 4, 2022 Share Posted March 4, 2022 Hey everyone, I just recently migrated to an unRAID server for Plex, so I'm still working out a lot of the kinks. However, I've been experiencing some significant performance issues with the Plex docker since I installed it. My specs on my rig are as follows: Ryzen 7 2700X 16GB DDR4 RAM 3200mHz GTX 970 Graphics Three 6TB HDD's (one for parity) and four 4TB HDD's installed on my array. 120GB Samsung 840 EVO SSD for Cache I have hardware transcoding enabled so that the GPU can transcode through the 970 (seems to be able to do 3-4 streams at a time, if not more) and have the /config AppData path set to - /mnt/cache/appdata/binhex-plex - after following some instructions on trying to achieve better performance. Unfortunately, I'm still finding that the server is having a lot of trouble. The "Movies" section seems to load pretty well within Plex, however the "TV Shows" more commonly fails to load and says that the server is offline when attempting to access it. Menus in general are extremely slow. I adjusted my media so that all the Movies and TV shows are under one "media" folder that the docker is pointing to (rather than the whole array as I had before) as well. Could this be a hardware issue? Do I potentially need more than 16GB of RAM or need to get an NVMe SDD in order to increase the read/write speeds of the cache? Or have I set something up wrong with the docker? Any help is greatly appreciated. Thanks!! Quote Link to comment
SNDS Posted March 4, 2022 Share Posted March 4, 2022 Is there any way to setup the docker to allow for media coming from multiple different shares? I'm breaking up my media to keep it a bit more organized. Every time I try to use the same /data container path (which I assume is fixed and I can't create a new container path manually) for a new share it fails. Quote Link to comment
Squid Posted March 4, 2022 Share Posted March 4, 2022 You can always add additional path mappings to any container. Add it with an appropriate new container path and host path and then add the container path to the library Quote Link to comment
SNDS Posted March 4, 2022 Share Posted March 4, 2022 Just now, Squid said: You can always add additional path mappings to any container. Add it with an appropriate new container path and host path and then add the container path to the library I guess that's my question, can I just make any container path in the mappings? Does it NEED to be /data? Quote Link to comment
Squid Posted March 4, 2022 Share Posted March 4, 2022 It can be anything you want. You don't even need /data (that's just a convention binhex uses) Quote Link to comment
SNDS Posted March 4, 2022 Share Posted March 4, 2022 Just now, Squid said: It can be anything you want. You don't even need /data (that's just a convention binhex uses) Perfect, thanks for the context and help! Quote Link to comment
Aelred Posted March 6, 2022 Share Posted March 6, 2022 (edited) Hi, I'm hoping someone can help me. I've had a plex server running for a while but I've just started running into a strange problem. When I try to play something through the web browser I get a playback error (Not enough CPU for conversion of this item). I know the answer sounds obvious but I'm using an Intel 10400 CPU which should be able to handle the playback of a 1080p(H.264) file. I'm wondering if the hardware acceleration has broken but I don't know how to check it. Edited March 6, 2022 by Aelred Quote Link to comment
Squid Posted March 6, 2022 Share Posted March 6, 2022 4 minutes ago, Aelred said: I'm hoping someone can help me. Try this: Delete this folder from the appdata and restart the program (It'll redownload the codecs) \Library\Application Support\Plex Media Server\Codecs Plex is a rather "unique" program across all platforms where one of their very constant updates will break something that already worked, or it corrupts itself. Quote Link to comment
ZoZat Posted March 13, 2022 Share Posted March 13, 2022 All of my binhex dockers have stopped working. I now have an error in them I haven't seen before. From the log: "/usr/local/bin/init.sh: line 60: 33 Bus error groupmod -o -g "${PGID}" users &> /dev/null". I'm using the latest versions of all dockers. Where can I start to try and fix this? Thanks. Quote Link to comment
ZoZat Posted March 14, 2022 Share Posted March 14, 2022 Can anyone help pleaase. Quote Link to comment
binhex Posted March 14, 2022 Author Share Posted March 14, 2022 Can anyone help pleaase.Try rebooting unraid for a start, sounds system related to meSent from my CLT-L09 using Tapatalk Quote Link to comment
ZoZat Posted March 14, 2022 Share Posted March 14, 2022 I've rebooted numerous times. Reinstalled system (with and without appdata backups) still no luck. Delugevpn and nzbgets work. Sonarr, lidarr, plex and raadarr still not working. I also used force update. I've never seen this error before. I've always used binhex dockers, they have been solid. Any other ideas? Be gentle with me, I still consider myself a noob. Quote Link to comment
ZoZat Posted March 14, 2022 Share Posted March 14, 2022 All the logs are the same error. log.txtlog.txt Quote Link to comment
binhex Posted March 14, 2022 Author Share Posted March 14, 2022 50 minutes ago, ZoZat said: I've never seen this error before you and me both. 51 minutes ago, ZoZat said: Delugevpn and nzbgets work. Sonarr, lidarr, plex and raadarr still not working. so this is odd as the same file showing errors is used in all my images (init.sh), so if deluge works then so should all the others. perhaps you have memory related issues, run memtest on your system and verify memory is ok. Quote Link to comment
ZoZat Posted March 14, 2022 Share Posted March 14, 2022 Will do. I'll report back later tonight. Quote Link to comment
ZoZat Posted March 15, 2022 Share Posted March 15, 2022 Ran memtest last night. Memory is 100%. What else can I try? Quote Link to comment
binhex Posted March 16, 2022 Author Share Posted March 16, 2022 14 hours ago, ZoZat said: What else can I try? probably your next best bet is to delete your docker image and re-create, then re-create all your docker containers, there is a guide somewhere to do it if you dont know how. found it:- https://wiki.unraid.net/Manual/Docker_Management#Re-Create_the_Docker_image_file Quote Link to comment
ZoZat Posted March 18, 2022 Share Posted March 18, 2022 I already nuked the docker image and created a new one. Still with the same result. I managed to get your dockers working by installing older versions. Not sure why that worked. Soon as I update to latest version, everything dies again. Revert to older - no problems. It's a fix. But I'd love to figure out why this happens. Could there be anything in delugevpn causing this? I had problems with it a couple of years ago that you had helped me with. slickvpn.ovpn Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.