valhalla540 Posted September 28, 2018 Share Posted September 28, 2018 (edited) On 7/18/2018 at 4:13 AM, binhex said: assuming you are a unraid user its dead easy, you simply go to the unraid web ui, docker tab, click on 'check for updates' button at the bottom of the screen, if there are any updates pending then you will then see an additional button appear to install the updates, or if you want to automate this then install the excellent CA auto update plugin. Tried updating as mentioned above. Cycles through, restarted binhex-plexpass but version still shows as 1.13 in General section of Plex. Didn't change. Edit: Okay I'm dense. I read 1.13 as 1.1.3....Firestick was just hiccuping I guess. Still working through it. Edited September 28, 2018 by valhalla540 Quote Link to comment
mfjonesy Posted October 1, 2018 Share Posted October 1, 2018 On 9/22/2018 at 10:26 PM, mfjonesy said: I'm having an issue with certain files not being read by Plex. It's a TV show and only one episode per season is showing up even though they are all named the same way. I'm assuming it's some sort of permissions issue. I can play back all the episodes fine on another PC using SMB. I downloaded the shows using the binhex DelugeVpn docker image from CA. The only other service I'm running is a Ubuntu VM. I've never had a problem like this and as far I know nothing changed to cause it. I've also tried the limetech plex docker container but that was having the same issue. Does anyone have any idea how I might be able to fix it? Thanks I was able to fix my issue by deleting the entire plex appdata folder and switching to the "official" plex docker container and then rebuilding the appdata. Just a heads up for anyone with the same issue! Quote Link to comment
lockrob2000 Posted November 19, 2018 Share Posted November 19, 2018 Hello and thanks for the help with the issue I recently had. This is something I noticed and it may be contained to my instance. When I open Plex it shows as !Not Secure and is an http connection. This is an issue I have not had in the past and may have something to do with the fact that my OS drive on the computer I am using to connect to the server with crapped out and I had to replace it with a new SSD and a new install of Win10. Is the connection to your docker https? or is that strictly a client issue? thanks- Quote Link to comment
anylettuce Posted January 13, 2019 Share Posted January 13, 2019 looking at transferring the meta data like posters to my SSD drive. What settings would I do? Quote Link to comment
Moose_Flunky Posted January 15, 2019 Share Posted January 15, 2019 I feel like the biggest idiot in the world right now. I've installed the binhex PlexPass docker. I assumed (there's that word) that it would install Plex Media Server on my Unraid system (6.6.6). So, I install the docker, and open the webui and it tells me it can't find a PMS (really??) and... "Install your new server Excellent. Check your download location for Plex Media Server and install it. Once it's running, check back here and we'll get you set up." I don't know if it makes any difference, but I am running Unraid in a VLAN. All my media is already installed and ready to be imported into Plex. Is this normal? If so, which version do I have to download? Or, more likely, which step did I miss that's keeping me from installing PMS? Thank you for your help (and your really nice dockers--I'm using quite a few of them right now). Quote Link to comment
Hoopster Posted January 15, 2019 Share Posted January 15, 2019 1 hour ago, Moose_Flunky said: I've installed the binhex PlexPass docker. I assumed (there's that word) that it would install Plex Media Server on my Unraid system (6.6.6). So, I install the docker, and open the webui and it tells me it can't find a PMS (really??) I use a different Plex docker, but, I am sure the concept is the same with this one. The docker installation is the Plex Media Server. You do not download and install PMS separately. When I installed the Plex docker, I got the same message about installing a server, but, after a few minutes, it sorted itself and presented the name of my unRAID server as the Plex server. When you say you are running unRAID in a VLAN, what does that mean? Do you have a static IP address assigned to your unRAID server? Did you install the docker in host mode so it is just piggy backing off the same server IP address, or, did you install the docker on a custom network/Docker VLAN and specify an IP address on a different subnet than the unRAID server? It might help if you posted your docker run command. Quote Link to comment
Moose_Flunky Posted January 15, 2019 Share Posted January 15, 2019 3 hours ago, Hoopster said: When you say you are running unRAID in a VLAN, what does that mean? Do you have a static IP address assigned to your unRAID server? Did you install the docker in host mode so it is just piggy backing off the same server IP address, or, did you install the docker on a custom network/Docker VLAN and specify an IP address on a different subnet than the unRAID server? Thank you for your response. I have a managed switch with my Unraid server in Vlan 30. I assigned it a static IP address of 10.0.30.200, and I've been able to get all my other dockers to run without issues (except for Unifi, but that's my lack of understanding). According to the docker page, the network is set to HOST. I just stopped and restarted the docker, and the webui takes me to the same screen as before--unable to find a server. I don't know how to generate the docker run command that you asked about. Here is a shot of the most recent log https://hub.docker.com/u/binhex/ 2019-01-14 21:55:39.169525 [info] System information Linux ******* 4.18.20-unRAID #1 SMP Fri Nov 23 11:38:16 PST 2018 x86_64 GNU/Linux 2019-01-14 21:55:39.205220 [info] PUID defined as '99' 2019-01-14 21:55:39.242475 [info] PGID defined as '100' 2019-01-14 21:55:39.331902 [info] UMASK defined as '000' 2019-01-14 21:55:39.366661 [info] Permissions already set for volume mappings 2019-01-14 21:55:39.401726 [info] TRANS_DIR defined as '/config/transcode' 2019-01-14 21:55:39.437826 [info] Starting Supervisor... 2019-01-14 21:55:39,602 INFO Included extra file "/etc/supervisor/conf.d/plexmediaserver.conf" during parsing 2019-01-14 21:55:39,602 INFO Set uid to user 0 succeeded 2019-01-14 21:55:39,604 INFO supervisord started with pid 8 2019-01-14 21:55:40,607 INFO spawned: 'plexmediaserver' with pid 49 2019-01-14 21:55:40,607 INFO reaped unknown pid 9 2019-01-14 21:55:41,609 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) Quote Link to comment
Hoopster Posted January 15, 2019 Share Posted January 15, 2019 6 minutes ago, Moose_Flunky said: I don't know how to generate the docker run command that you asked about. Quote Link to comment
Moose_Flunky Posted January 15, 2019 Share Posted January 15, 2019 Got it. Thanks. Stopping container: binhex-plexpass Successfully stopped container 'binhex-plexpass' Removing container: binhex-plexpass Successfully removed container 'binhex-plexpass' Command:root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='binhex-plexpass' --net='host' -e TZ="America/Phoenix" -e HOST_OS="Unraid" -e 'TRANS_DIR'='/config/transcode' -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -v '/mnt/user/':'/media':'rw' -v '/mnt/user/appdata/binhex-plexpass':'/config':'rw' 'binhex/arch-plexpass' 55f6110dd929995b0b5ce78e6f5fd08ed03e76e4010d3beb70bfe83475c5242e The command finished successfully! Quote Link to comment
Moose_Flunky Posted January 16, 2019 Share Posted January 16, 2019 Hoopster I attached the docker run command to my previous message. I still cannot get the PMS to come up Quote Link to comment
Hoopster Posted January 16, 2019 Share Posted January 16, 2019 4 hours ago, Moose_Flunky said: Hoopster I attached the docker run command to my previous message. I still cannot get the PMS to come up I don't see anything unusual in your docker run command. Everything looks to be normal. I wish I could tell you why the WebUI is not finding your Plex Media Server. As I said, I run a different docker app for Plex, so, perhaps someone also running Binhex Plex has seen something similar and can help. It almost appears as if somehow the webUI and the PMS/docker are not communicating because of some networking issue. It is possible with docker VLANs to isolate dockers from the unRAID host such that they do not communicate, but, that does not appear to be an issue here. Your Plex docker is in host mode on unRAID. Quote Link to comment
Moose_Flunky Posted January 16, 2019 Share Posted January 16, 2019 1 hour ago, Hoopster said: I don't see anything unusual in your docker run command. Everything looks to be normal. I wish I could tell you why the WebUI is not finding your Plex Media Server. As I said, I run a different docker app for Plex, so, perhaps someone also running Binhex Plex has seen something similar and can help. Does the installation need any particular ports to be open? I know I have to do some port forwarding from my router to get some things communicating from the server to the big, wide world. So, is PMS actually installed buy inaccessible, or is it stalling out during the installation? Is there any way to tell? Quote Link to comment
binhex Posted January 16, 2019 Author Share Posted January 16, 2019 3 hours ago, Moose_Flunky said: Does the installation need any particular ports to be open? yes it does need ports open to be visible on your LAN, but for this particular image you dont need to define them as it runs in "host" mode and thus do not need to (and cannot) define the ports for the container. As far as incoming ports then yes if you want to connect to your plex server outside of your network then you will either need to turn on uPnP on your router or set a static port in plex and manually create the port forward on your router, the choice is yours as to which you do. 3 hours ago, Moose_Flunky said: So, is PMS actually installed buy inaccessible, PMS is most definitely installed and works with the current latest image (i eat my own dog food), if you are having problems accessing the server then its most probably LAN related in some manner, so just check things like vlan, firewall, router etc and make sure its not being blocked. Quote Link to comment
Moose_Flunky Posted January 22, 2019 Share Posted January 22, 2019 @binhex Thanks! I finally got it running. It took quite a bit of installing and un-installing to get it running. I eventually had to take my unRaid box out of my vlan (which was a pain, since the vlan was providing DHCP and routing), attach the box to a stand-alone modem that I could configure with the correct dhcp range, and then re-install. Once I did that, the Plex library came up. Interestingly, I was then able to put my Unraid box BACK into my vlan in it's former configuration and everything worked like a charm. Something about the vlan was keeping the library from initializing, but once configured it had no issues. Great package, btw. 1 Quote Link to comment
IrishBiker Posted March 3, 2019 Share Posted March 3, 2019 (edited) Hi I can seem to access the GUI, The docker starts but when I click on the GUI I get "The connection was reset". Anyone else had this issue? Edited March 3, 2019 by IrishBiker Quote Link to comment
Soldius Posted March 15, 2019 Share Posted March 15, 2019 On 3/25/2018 at 1:55 PM, binhex said: note /transcode can be named anything you want I want to transcode to ram - create a new volume mapping, host path /tmp container path /transcode then define TRANS_DIR so that it points at ram drive e.g.:- TRANS_DIR=/transcode /transcode maps to host path /tmp Hi binhex and unRAID community, I just wanted to confirm something regarding this config. I am using binhex-plexpass and does have a plex pass subscription. So i just want to confirm if I have to do this still, in order to encode to ram instead of cache. Or does it know enough to automatically does that with the default /config/transcode setting? Please let me know. I have been searching for a while but not too clear on this. Thank you very much ahead of time. Quote Link to comment
binhex Posted March 15, 2019 Author Share Posted March 15, 2019 1 hour ago, Soldius said: if I have to do this still, in order to encode to ram instead of cache yes, and btw you are in the wrong support thread, this is for plex not plex pass. Quote Link to comment
planetwilson Posted March 24, 2019 Share Posted March 24, 2019 I just tried moving from the limetech image to this one and once I'd fiddled to match the config folder structure it all worked fine. However I'm getting the odd transcoding error viewing a film on an iPad that doesn't happen with the limetech one? Any ideas as to what the cause could be? Quote Link to comment
JohnGrosshans Posted April 6, 2019 Share Posted April 6, 2019 (edited) Hey everyone. I have run into a problem where my plexpass dock is just throwing a "refused to connect" error any time I try to access it. I think my config is right but nothing changed and then one day it just stopped working. The log for the plexpass docker looks like this: "2019-04-06 18:29:38.475582 [info] System information Linux unRAID 4.18.20-unRAID #1 SMP Fri Nov 23 11:38:16 PST 2018 x86_64 GNU/Linux 2019-04-06 18:29:38.515509 [info] PUID defined as '99' 2019-04-06 18:29:38.688976 [info] PGID defined as '100' 2019-04-06 18:29:38.904732 [info] UMASK defined as '000' 2019-04-06 18:29:38.930184 [info] Permissions already set for volume mappings 2019-04-06 18:29:38.955780 [info] TRANS_DIR defined as '/config/transcode' 2019-04-06 18:29:39.040982 [info] Starting Supervisor... 2019-04-06 18:29:39,708 INFO Included extra file "/etc/supervisor/conf.d/plexmediaserver.conf" during parsing 2019-04-06 18:29:39,708 INFO Set uid to user 0 succeeded 2019-04-06 18:29:39,711 INFO supervisord started with pid 8 2019-04-06 18:29:40,712 INFO spawned: 'plexmediaserver' with pid 54 2019-04-06 18:29:40,713 INFO reaped unknown pid 9 2019-04-06 18:29:41,713 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2019-04-06 18:29:42,062 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22464114988168 for <Subprocess at 22464114988240 with name plexmediaserver in state RUNNING> (stdout)> 2019-04-06 18:29:42,062 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22464114990256 for <Subprocess at 22464114988240 with name plexmediaserver in state RUNNING> (stderr)> 2019-04-06 18:29:42,062 INFO exited: plexmediaserver (exit status 255; not expected) 2019-04-06 18:29:42,062 DEBG received SIGCLD indicating a child quit 2019-04-06 18:29:43,064 INFO spawned: 'plexmediaserver' with pid 59 2019-04-06 18:29:43,210 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22464131352336 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stdout)> 2019-04-06 18:29:43,210 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22464114465896 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stderr)> 2019-04-06 18:29:43,210 INFO exited: plexmediaserver (exit status 255; not expected) 2019-04-06 18:29:43,210 DEBG received SIGCLD indicating a child quit 2019-04-06 18:29:44,212 INFO spawned: 'plexmediaserver' with pid 64 2019-04-06 18:29:44,410 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22464131352336 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stdout)> 2019-04-06 18:29:44,410 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22464114971856 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stderr)> 2019-04-06 18:29:44,410 INFO exited: plexmediaserver (exit status 255; not expected) 2019-04-06 18:29:44,410 DEBG received SIGCLD indicating a child quit 2019-04-06 18:29:46,413 INFO spawned: 'plexmediaserver' with pid 69 2019-04-06 18:29:46,546 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22464131352336 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stdout)> 2019-04-06 18:29:46,546 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22464114465536 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stderr)> 2019-04-06 18:29:46,546 INFO exited: plexmediaserver (exit status 255; not expected) 2019-04-06 18:29:46,546 DEBG received SIGCLD indicating a child quit 2019-04-06 18:29:49,550 INFO spawned: 'plexmediaserver' with pid 74 2019-04-06 18:29:49,697 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22464131352336 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stdout)> 2019-04-06 18:29:49,697 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22464114971856 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stderr)> 2019-04-06 18:29:49,698 INFO exited: plexmediaserver (exit status 255; not expected) 2019-04-06 18:29:49,698 DEBG received SIGCLD indicating a child quit 2019-04-06 18:29:50,698 INFO gave up: plexmediaserver entered FATAL state, too many start retries too quickly" Edited April 6, 2019 by JohnGrosshans added log Quote Link to comment
mrbilky Posted April 6, 2019 Share Posted April 6, 2019 17 minutes ago, JohnGrosshans said: Hey everyone. I have run into a problem where my plexpass dock is just throwing a "refused to connect" error any time I try to access it. I think my config is right but nothing changed and then one day it just stopped working. The log for the plexpass docker looks like this: "2019-04-06 18:29:38.475582 [info] System information Linux unRAID 4.18.20-unRAID #1 SMP Fri Nov 23 11:38:16 PST 2018 x86_64 GNU/Linux 2019-04-06 18:29:38.515509 [info] PUID defined as '99' 2019-04-06 18:29:38.688976 [info] PGID defined as '100' 2019-04-06 18:29:38.904732 [info] UMASK defined as '000' 2019-04-06 18:29:38.930184 [info] Permissions already set for volume mappings 2019-04-06 18:29:38.955780 [info] TRANS_DIR defined as '/config/transcode' 2019-04-06 18:29:39.040982 [info] Starting Supervisor... 2019-04-06 18:29:39,708 INFO Included extra file "/etc/supervisor/conf.d/plexmediaserver.conf" during parsing 2019-04-06 18:29:39,708 INFO Set uid to user 0 succeeded 2019-04-06 18:29:39,711 INFO supervisord started with pid 8 2019-04-06 18:29:40,712 INFO spawned: 'plexmediaserver' with pid 54 2019-04-06 18:29:40,713 INFO reaped unknown pid 9 2019-04-06 18:29:41,713 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2019-04-06 18:29:42,062 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22464114988168 for <Subprocess at 22464114988240 with name plexmediaserver in state RUNNING> (stdout)> 2019-04-06 18:29:42,062 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22464114990256 for <Subprocess at 22464114988240 with name plexmediaserver in state RUNNING> (stderr)> 2019-04-06 18:29:42,062 INFO exited: plexmediaserver (exit status 255; not expected) 2019-04-06 18:29:42,062 DEBG received SIGCLD indicating a child quit 2019-04-06 18:29:43,064 INFO spawned: 'plexmediaserver' with pid 59 2019-04-06 18:29:43,210 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22464131352336 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stdout)> 2019-04-06 18:29:43,210 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22464114465896 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stderr)> 2019-04-06 18:29:43,210 INFO exited: plexmediaserver (exit status 255; not expected) 2019-04-06 18:29:43,210 DEBG received SIGCLD indicating a child quit 2019-04-06 18:29:44,212 INFO spawned: 'plexmediaserver' with pid 64 2019-04-06 18:29:44,410 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22464131352336 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stdout)> 2019-04-06 18:29:44,410 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22464114971856 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stderr)> 2019-04-06 18:29:44,410 INFO exited: plexmediaserver (exit status 255; not expected) 2019-04-06 18:29:44,410 DEBG received SIGCLD indicating a child quit 2019-04-06 18:29:46,413 INFO spawned: 'plexmediaserver' with pid 69 2019-04-06 18:29:46,546 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22464131352336 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stdout)> 2019-04-06 18:29:46,546 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22464114465536 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stderr)> 2019-04-06 18:29:46,546 INFO exited: plexmediaserver (exit status 255; not expected) 2019-04-06 18:29:46,546 DEBG received SIGCLD indicating a child quit 2019-04-06 18:29:49,550 INFO spawned: 'plexmediaserver' with pid 74 2019-04-06 18:29:49,697 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22464131352336 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stdout)> 2019-04-06 18:29:49,697 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22464114971856 for <Subprocess at 22464114988240 with name plexmediaserver in state STARTING> (stderr)> 2019-04-06 18:29:49,698 INFO exited: plexmediaserver (exit status 255; not expected) 2019-04-06 18:29:49,698 DEBG received SIGCLD indicating a child quit 2019-04-06 18:29:50,698 INFO gave up: plexmediaserver entered FATAL state, too many start retries too quickly" My settings are the same with the exception of I don't have privileged on have you tried without it on Quote Link to comment
JohnGrosshans Posted April 6, 2019 Share Posted April 6, 2019 (edited) 4 minutes ago, mrbilky said: My settings are the same with the exception of I don't have privileged on have you tried without it on turned off privileged and still nothing Edited April 6, 2019 by JohnGrosshans spelling Quote Link to comment
JohnGrosshans Posted April 7, 2019 Share Posted April 7, 2019 I got impatient and deleted the old docker, renamed the appdata folder for it old-binhex-plexpass and reinstalled. It's chugging through my libraries now. Weird. Quote Link to comment
binhex Posted April 7, 2019 Author Share Posted April 7, 2019 I got impatient and deleted the old docker, renamed the appdata folder for it old-binhex-plexpass and reinstalled. It's chugging through my libraries now. Weird.It's possible you have corruption of your metadata if I were you I would make a backup of your Plex folder once it's finished indexing all your media I have a weekly cron job that does just that for me or use the backup pluginSent from my EML-L29 using Tapatalk 1 Quote Link to comment
cogliostro Posted April 14, 2019 Share Posted April 14, 2019 Can you tell me the differnce between this Binhex-Plex Docker and the normal Plex Docker ? Quote Link to comment
JonathanM Posted April 14, 2019 Share Posted April 14, 2019 17 minutes ago, cogliostro said: Can you tell me the differnce between this Binhex-Plex Docker and the normal Plex Docker ? Google unraid plex docker differences site:forums.unraid.net Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.