binhex Posted November 11, 2020 Author Share Posted November 11, 2020 (edited) 3 hours ago, SpyKiIIer said: Still not sure what caused the corruption though. i guess you were unlucky, plex must of been doing some database maintenance or indexing new content at the time it was instructed to shutdown, it didnt shutdown in the time allotted (i think its 10 secs) and thus unraid then pulls the plug on the container which no doubt caused your database corruption. if you want to prevent this then i would recommend shutting down containers manually rather than just performing a shutdown and letting the os handle shutdown of containers. Edited November 11, 2020 by binhex Quote Link to comment
PoppaJohn Posted November 17, 2020 Share Posted November 17, 2020 I have been using binhex-plexpass for over a year. Lately I am getting a lot of errors saying I cant stream directly from the server fast enough (I am on a gigabit network) so I went to check the settings and I find that I no longer have a webui option for the docker! I have a bookmark to the ip, but when it didn't work I logged into unraid and found no more option for webui.... Any advice? Quote Link to comment
paperblankets Posted November 17, 2020 Share Posted November 17, 2020 20 minutes ago, PoppaJohn said: I have been using binhex-plexpass for over a year. Lately I am getting a lot of errors saying I cant stream directly from the server fast enough (I am on a gigabit network) so I went to check the settings and I find that I no longer have a webui option for the docker! I have a bookmark to the ip, but when it didn't work I logged into unraid and found no more option for webui.... Any advice? Like it's gone from the dropdown? That's weird/I have not experienced that before. I might make a new container for binhex-plexpass, (stop the old one) point the new container at your old /config and see if the option shows up in the dropdown after that. If it does maybe just use that new container. Quote Link to comment
binhex Posted November 17, 2020 Author Share Posted November 17, 2020 30 minutes ago, PoppaJohn said: I have been using binhex-plexpass for over a year. Lately I am getting a lot of errors saying I cant stream directly from the server fast enough (I am on a gigabit network) so I went to check the settings and I find that I no longer have a webui option for the docker! I have a bookmark to the ip, but when it didn't work I logged into unraid and found no more option for webui.... Any advice? i would suspect you have changed your network type from the default of 'host' to bridge, am i correct?. Quote Link to comment
PoppaJohn Posted November 17, 2020 Share Posted November 17, 2020 27 minutes ago, paperblankets said: Like it's gone from the dropdown? That's weird/I have not experienced that before. I might make a new container for binhex-plexpass, (stop the old one) point the new container at your old /config and see if the option shows up in the dropdown after that. If it does maybe just use that new container. Yes, it is gone from the dropdown. Not sure how long that has been missing, since I normally just use a bookmark to the location: http://192.168.1.xxx:32400/web/ Quote Link to comment
PoppaJohn Posted November 17, 2020 Share Posted November 17, 2020 21 minutes ago, binhex said: i would suspect you have changed your network type from the default of 'host' to bridge, am i correct?. I have not made any changes to my network type. The strangest thing is that plex is still running, and remote access is working (which means my port forward is working) and if I log in at plex.tv I can even edit the settings there, just can't reach the webui on my local network. Quote Link to comment
PoppaJohn Posted November 17, 2020 Share Posted November 17, 2020 1 hour ago, paperblankets said: Like it's gone from the dropdown? That's weird/I have not experienced that before. I might make a new container for binhex-plexpass, (stop the old one) point the new container at your old /config and see if the option shows up in the dropdown after that. If it does maybe just use that new container. So I made a new container, and if I use a new appdata folder, the bookmark works. (still no drop down, oddly) But when I point it to my old appdata folder, the bookmark stops working, so something must be corrupt in the appdata folder.... and oddly it only effects the remote link access????? so strange Quote Link to comment
Herbiewalker Posted November 18, 2020 Share Posted November 18, 2020 (edited) I just finished setup of my container, transferred my Plex library and metadata; but I am having some problems. I can play some of my media but not anything that seems to be in 4K. I first tried to play the Madalorian in 4K on my FireTV and it would only play for about 90 sec before stopping and then never startup again. If I restarted it would play for another 90 sec. I went to the browser (Firefox, Brave) and tried again but no luck at all with playback. Even the 1080p version was not playing as a test in the browser but it would play on the FireTV... I have been looking at the logs for awhile but nothing stands out to me other than EAE errors but I cant find a fix… Attached are the logs if you need to see them. Did I miss something during setup?? Please let me know if you need any more info. Plex Media Server Logs_2020-11-17_21-40-58.zip Plex Media Server Logs_2020-11-18_12-27-28.zip Edited November 18, 2020 by Herbiewalker Quote Link to comment
Hoopster Posted November 18, 2020 Share Posted November 18, 2020 50 minutes ago, Herbiewalker said: I have been looking at the logs for awhile but nothing stands out to me other than EAE errors but I cant find a fix… EAE errors are usually fixed by deleting the contents of the codecs folder in Plex which forces a new download of each codec as needed. Sometime they get messed up. Codecs folder is under LIbrary>Application Support>Plex Media Server in your Plex appdata path. 1 Quote Link to comment
Herbiewalker Posted November 18, 2020 Share Posted November 18, 2020 (edited) 1 hour ago, Hoopster said: EAE errors are usually fixed by deleting the contents of the codecs folder in Plex which forces a new download of each codec as needed. Sometime they get messed up. Codecs folder is under LIbrary>Application Support>Plex Media Server in your Plex appdata path. Thanks! I deleted all the contents of the codecs folder and so far its good. I have three streams going 1x 4K and 2x 1080p with one transcoding audio..... Edited November 18, 2020 by Herbiewalker Quote Link to comment
mdipinto Posted November 24, 2020 Share Posted November 24, 2020 Hello, I have been using this docker for a while now, and on and off a few problems which were quick to fix. but I'm having a problem that I can't figure out. as you can see below, it's not having any ports to the docker, and when trying to access the webui, nothing loads. giving the standard error can't be reached. I have attemped to change to bridge mode and map 32400 but nothing. this is the log: Quote Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2020-11-23 21:09:18.674056 [info] System information Linux bootland 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux 2020-11-23 21:09:18.707607 [info] OS_ARCH defined as 'x86-64' 2020-11-23 21:09:18.738361 [info] PUID defined as '99' 2020-11-23 21:09:18.817508 [info] PGID defined as '100' 2020-11-23 21:09:18.872603 [info] UMASK defined as '000' 2020-11-23 21:09:18.899698 [info] Permissions already set for volume mappings 2020-11-23 21:09:18.937949 [info] Deleting files in /tmp (non recursive)... 2020-11-23 21:09:18.970510 [info] TRANS_DIR defined as '/config/transcode' 2020-11-23 21:09:19.042190 [info] Starting Supervisor... 2020-11-23 21:09:19,339 INFO Included extra file "/etc/supervisor/conf.d/plexmediaserver.conf" during parsing 2020-11-23 21:09:19,339 INFO Set uid to user 0 succeeded 2020-11-23 21:09:19,343 INFO supervisord started with pid 6 2020-11-23 21:09:20,345 INFO spawned: 'plexmediaserver' with pid 68 2020-11-23 21:09:20,346 INFO reaped unknown pid 7 (exit status 0) 2020-11-23 21:09:20,502 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22390471769344 for <Subprocess at 22390471768240 with name plexmediaserver in state STARTING> (stdout)> 2020-11-23 21:09:20,502 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22390471766080 for <Subprocess at 22390471768240 with name plexmediaserver in state STARTING> (stderr)> 2020-11-23 21:09:20,503 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-23 21:09:20,503 DEBG received SIGCHLD indicating a child quit 2020-11-23 21:09:21,506 INFO spawned: 'plexmediaserver' with pid 73 2020-11-23 21:09:21,535 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22390471768864 for <Subprocess at 22390471768240 with name plexmediaserver in state STARTING> (stdout)> 2020-11-23 21:09:21,536 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22390471530384 for <Subprocess at 22390471768240 with name plexmediaserver in state STARTING> (stderr)> 2020-11-23 21:09:21,536 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-23 21:09:21,536 DEBG received SIGCHLD indicating a child quit 2020-11-23 21:09:23,540 INFO spawned: 'plexmediaserver' with pid 78 2020-11-23 21:09:23,567 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22390471492176 for <Subprocess at 22390471768240 with name plexmediaserver in state STARTING> (stdout)> 2020-11-23 21:09:23,568 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22390471883936 for <Subprocess at 22390471768240 with name plexmediaserver in state STARTING> (stderr)> 2020-11-23 21:09:23,568 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-23 21:09:23,568 DEBG received SIGCHLD indicating a child quit 2020-11-23 21:09:26,572 INFO spawned: 'plexmediaserver' with pid 83 2020-11-23 21:09:26,606 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22390471768864 for <Subprocess at 22390471768240 with name plexmediaserver in state STARTING> (stdout)> 2020-11-23 21:09:26,607 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22390471530288 for <Subprocess at 22390471768240 with name plexmediaserver in state STARTING> (stderr)> 2020-11-23 21:09:26,607 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-23 21:09:26,607 DEBG received SIGCHLD indicating a child quit 2020-11-23 21:09:27,608 INFO gave up: plexmediaserver entered FATAL state, too many start retries too quickly 2020-11-23 21:10:13,661 WARN received SIGTERM indicating exit request 2020-11-23 21:10:13,661 WARN received SIGTERM indicating exit request Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2020-11-23 21:10:26.333512 [info] System information Linux bootland 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux 2020-11-23 21:10:26.364452 [info] OS_ARCH defined as 'x86-64' 2020-11-23 21:10:26.391723 [info] PUID defined as '99' 2020-11-23 21:10:26.423919 [info] PGID defined as '100' 2020-11-23 21:10:26.467023 [info] UMASK defined as '000' 2020-11-23 21:10:26.491826 [info] Permissions already set for volume mappings 2020-11-23 21:10:26.531705 [info] Deleting files in /tmp (non recursive)... 2020-11-23 21:10:26.561428 [info] TRANS_DIR defined as '/config/transcode' 2020-11-23 21:10:26.589771 [info] Starting Supervisor... 2020-11-23 21:10:26,861 INFO Included extra file "/etc/supervisor/conf.d/plexmediaserver.conf" during parsing 2020-11-23 21:10:26,861 INFO Set uid to user 0 succeeded 2020-11-23 21:10:26,864 INFO supervisord started with pid 6 2020-11-23 21:10:27,867 INFO spawned: 'plexmediaserver' with pid 61 2020-11-23 21:10:27,868 INFO reaped unknown pid 7 (exit status 0) 2020-11-23 21:10:27,965 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22869473885440 for <Subprocess at 22869473884336 with name plexmediaserver in state STARTING> (stdout)> 2020-11-23 21:10:27,966 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22869473882176 for <Subprocess at 22869473884336 with name plexmediaserver in state STARTING> (stderr)> 2020-11-23 21:10:27,966 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-23 21:10:27,966 DEBG received SIGCHLD indicating a child quit 2020-11-23 21:10:28,969 INFO spawned: 'plexmediaserver' with pid 66 2020-11-23 21:10:29,004 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22869473884960 for <Subprocess at 22869473884336 with name plexmediaserver in state STARTING> (stdout)> 2020-11-23 21:10:29,004 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22869473646480 for <Subprocess at 22869473884336 with name plexmediaserver in state STARTING> (stderr)> 2020-11-23 21:10:29,005 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-23 21:10:29,005 DEBG received SIGCHLD indicating a child quit 2020-11-23 21:10:31,009 INFO spawned: 'plexmediaserver' with pid 71 2020-11-23 21:10:31,041 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22869473608272 for <Subprocess at 22869473884336 with name plexmediaserver in state STARTING> (stdout)> 2020-11-23 21:10:31,041 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22869474000032 for <Subprocess at 22869473884336 with name plexmediaserver in state STARTING> (stderr)> 2020-11-23 21:10:31,041 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-23 21:10:31,041 DEBG received SIGCHLD indicating a child quit 2020-11-23 21:10:34,045 INFO spawned: 'plexmediaserver' with pid 76 2020-11-23 21:10:34,080 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22869473884960 for <Subprocess at 22869473884336 with name plexmediaserver in state STARTING> (stdout)> 2020-11-23 21:10:34,081 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22869473646384 for <Subprocess at 22869473884336 with name plexmediaserver in state STARTING> (stderr)> 2020-11-23 21:10:34,081 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-23 21:10:34,081 DEBG received SIGCHLD indicating a child quit 2020-11-23 21:10:34,045 INFO spawned: 'plexmediaserver' with pid 76 2020-11-23 21:10:34,080 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22869473884960 for <Subprocess at 22869473884336 with name plexmediaserver in state STARTING> (stdout)> 2020-11-23 21:10:34,081 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22869473646384 for <Subprocess at 22869473884336 with name plexmediaserver in state STARTING> (stderr)> 2020-11-23 21:10:34,081 INFO exited: plexmediaserver (exit status 255; not expected) 2020-11-23 21:10:34,081 DEBG received SIGCHLD indicating a child quit 2020-11-23 21:10:35,083 INFO gave up: plexmediaserver entered FATAL state, too many start retries too quickly Quote Link to comment
jaj08 Posted November 25, 2020 Share Posted November 25, 2020 Any reason why my docker keeps telling me an update is available, appears to apply the update, and then goes back to update available? Overview of what I see when applying the update, looks like everything seems to go ok TOTAL DATA PULLED: 251 MB Successfully stopped container 'binhex-plexpass' Successfully removed container 'binhex-plexpass' The command finished successfully! Quote Link to comment
paperblankets Posted November 25, 2020 Share Posted November 25, 2020 (edited) 58 minutes ago, jaj08 said: Any reason why my docker keeps telling me an update is available, appears to apply the update, and then goes back to update available? Overview of what I see when applying the update, looks like everything seems to go ok TOTAL DATA PULLED: 251 MB Successfully stopped container 'binhex-plexpass' Successfully removed container 'binhex-plexpass' The command finished successfully! I have nothing to back up this is your issue, but docker made a large change on November 2nd. They are no longer allowing unlimited downloads from dockerhub hosted repositories. I suspect this could introduce unexpected bugs into how unraid checks for and applies docker updates. https://docs.docker.com/docker-hub/download-rate-limit/ Either way I don't have any good ideas to try. You could forcibly click the check for updates button, and maybe connect over a vpn (Or if you are on a vpn, try connecting off the vpn, you could be being rate limited because others are hitting dockerhub from the same vpn). Hopefully someone else has a better idea of what the cause might be. Edited November 25, 2020 by paperblankets Quote Link to comment
bkwq Posted December 2, 2020 Share Posted December 2, 2020 Hello, Every time that I update Plex via docker, something happens to the codecs and a lot of my content won't play. It just sits there trying to buffer. If I delete the files in the Codecs folder and restart Plex, everything plays fine. Any ideas? Quote Link to comment
paperblankets Posted December 2, 2020 Share Posted December 2, 2020 (edited) 13 minutes ago, bkwq said: Hello, Every time that I update Plex via docker, something happens to the codecs and a lot of my content won't play. It just sits there trying to buffer. If I delete the files in the Codecs folder and restart Plex, everything plays fine. Any ideas? As a bad, quick solution you could add a user script to: rm -rf /mnt/user/appdata/binhex-plexpass/Plex\ Media\ Server/Codecs/ (Or wherever your appdata is) Set it to run on array start, or on a schedule. Edited December 2, 2020 by paperblankets Quote Link to comment
planetwilson Posted December 2, 2020 Share Posted December 2, 2020 Any plans to include the required libraries for Intel hardware based HDR->SDR tone mapping? https://support.plex.tv/articles/hdr-to-sdr-tone-mapping/ Quote Link to comment
anon1105 Posted December 7, 2020 Share Posted December 7, 2020 Hi, Recently I've been having an issue with the binhex - Plex Pass docker accessing my HAUPPAUGE WinTV-quadHD via ich777's DVB Driver. Following his instructions here: I was able to get tvheadend and the plexinc/pms-docker to read off my tuners. However, whenever I use binhex Plex Pass, the tuners never show. Any ideas what I can try to get it work? Thank you, Quote Link to comment
Brenholder Posted December 27, 2020 Share Posted December 27, 2020 Is there way to adjust the delay between episodes when they are auto playing? 15 seconds seems long. Quote Link to comment
Paul_Ber Posted December 29, 2020 Share Posted December 29, 2020 There is no variable for "PLEX_CLAIM"? I am switching from the PLEX official version. Quote Link to comment
Paul_Ber Posted December 29, 2020 Share Posted December 29, 2020 (edited) I have one odd login issue but only the WebUI on the unraid gui i get a login loop as shown in the photo. Edit: had to edit the settings for WEBUI from http to https to get it to work on the Server UNRAID GUI browser. Edit2: well I went and check again after restarting the machine, still loops on the login like above only on the actual Server Unraid's GUI firefox. I usually don't use the PLEX web on the server so no hurry. Some people say it is a Firefox issue but hard to try on the Server as the Browser is only Firefox. Edited December 29, 2020 by Paul_Ber Quote Link to comment
Nnyan Posted January 1, 2021 Share Posted January 1, 2021 Hello all, sorry for the noob question but I have my NAS mapped in Unraid as an SMB share and that works but I just can't figure out how to make this "visible" to the Plex container (installed using defaults). Thank you for your help. Quote Link to comment
lockrob2000 Posted January 7, 2021 Share Posted January 7, 2021 Not sure if this is the correct place for this, but as this is happening in binhex-plexpass, I'll give it a shot. Recently some of my videos have audio that will not play. If the audio is AC3 or EAC3, it plays. But if the audio is AC3 5.1, or HE-AAC STEREO, it does not play. All of these formats played flawlessly just recently. Any suggestions as to where to start troubleshooting? Thank you- Quote Link to comment
Hoopster Posted January 7, 2021 Share Posted January 7, 2021 19 hours ago, lockrob2000 said: Any suggestions as to where to start troubleshooting? Often issues such as these can be resolved by deleting the Codecs folder (or renaming it to something else if deleting it worries you) and letting Plex download the needed codecs again on demand. This folder is located in {path to appdata}/{name of Plex docker container folder}/Library/Application Support/Plex Media Server/ Quote Link to comment
lockrob2000 Posted January 7, 2021 Share Posted January 7, 2021 Great! thanks. I'll try that first thing, a similar approach helps when metadata doesn't load. Quote Link to comment
lockrob2000 Posted January 9, 2021 Share Posted January 9, 2021 OK, that didn't work. Is there a way to add codec packs to Plex? thanks- Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.