hardenakker Posted May 15, 2016 Share Posted May 15, 2016 please, would love to see support for query_ip_whitelist ! :'( Quote Link to comment
H2O_King89 Posted June 14, 2016 Share Posted June 14, 2016 So I just made a mistake... I am new to teamspeak and spent 5 hours give or take setting up... I seen the docker had an update and deleted everything I had setup. My question is, what is the proper way to update the docker and is there a way to back settings up? Quote Link to comment
Guest Posted October 2, 2016 Share Posted October 2, 2016 Unable to log into server via putty, getting following error. I made sure to get the appropriate server admin username and password from the supervisord.log file in the docker installation folder. error id=520 msg=invalid\sloginname\sor\spassword Also, I can connect using my intranet IP but unable to connect via external IP. I've ensured ports are open and forwarded. When I do connect via intranet address, I cannot use the generated superadmin token and of course I cannot log in via putty to generate a second key. Please advise -- any and all help is greatly appreciated. Quote Link to comment
binhex Posted October 3, 2016 Author Share Posted October 3, 2016 Unable to log into server via putty, getting following error. I made sure to get the appropriate server admin username and password from the supervisord.log file in the docker installation folder. error id=520 msg=invalid\sloginname\sor\spassword Also, I can connect using my intranet IP but unable to connect via external IP. I've ensured ports are open and forwarded. When I do connect via intranet address, I cannot use the generated superadmin token and of course I cannot log in via putty to generate a second key. Please advise -- any and all help is greatly appreciated. ok firstly you cant ssh/telnet into this docker, you simply connect using the official teamspeak client, you use the auto generated admin key to login and you can then setup channels etc as you see fit. as far as external access, all you should need to do is port forard the correct port and voila, you should be able to access it via the teamspeak client using <your public ip>:<the port you forwarded> Quote Link to comment
Guest Posted October 5, 2016 Share Posted October 5, 2016 Okay thanks for that binhex -- I was confused from an earlier post in this thread instructing us to telnet into server for additional priv keys. I'm able to connect to the server now and setup channels that persist through restarts, however I still cannot connect externally. Here are my settings: I also have ports forwarded within my router's interface using the same ports and matching protocols. I have many other applications forwarded without issue with my network as I'm pretty familiar with network configuration. As you can see I'm also on 6.2. Please advise -- thank you! Quote Link to comment
binhex Posted October 5, 2016 Author Share Posted October 5, 2016 Okay thanks for that binhex -- I was confused from an earlier post in this thread instructing us to telnet into server for additional priv keys. I'm able to connect to the server now and setup channels that persist through restarts, however I still cannot connect externally. Here are my settings: I also have ports forwarded within my router's interface using the same ports and matching protocols. I have many other applications forwarded without issue with my network as I'm pretty familiar with network configuration. As you can see I'm also on 6.2. Please advise -- thank you! Can you please post a snipped screenshot of the port forwarding config on your router. Sent from my SM-G900F using Tapatalk Quote Link to comment
Guest Posted October 5, 2016 Share Posted October 5, 2016 Can you please post a snipped screenshot of the port forwarding config on your router. Sent from my SM-G900F using Tapatalk Thanks for the prompt reply! Was just busy pruning some unused apps but you can see I still have several forwarded ports and ranges, the only issues seem to be with the TS3 ports for some reason. Quote Link to comment
Guest Posted October 5, 2016 Share Posted October 5, 2016 Okay, I just removed and readded the ports exactly as I had them one at a time, restarted the server and it's working for some reason. No clue honestly. CanYouSeeMe.org still cannot see me through that port. Quote Link to comment
binhex Posted October 5, 2016 Author Share Posted October 5, 2016 Okay, I just removed and readded the ports exactly as I had them one at a time, restarted the server and it's working for some reason. No clue honestly. CanYouSeeMe.org still cannot see me through that port. glad its sorted, bug in the router software perhaps? Quote Link to comment
Bjonness406 Posted October 7, 2016 Share Posted October 7, 2016 CanYouSeeMe.org still cannot see me through that port. What port? I belive canyouseeme.org only can detect open tcp ports, and not udp. Quote Link to comment
Guest Posted October 7, 2016 Share Posted October 7, 2016 CanYouSeeMe.org still cannot see me through that port. What port? I belive canyouseeme.org only can detect open tcp ports, and not udp. Oh, if that's the case then yes it was through UDP via 9987 port. It's honestly been working fine despite that. I really appreciate the prompt replies from everyone! Quote Link to comment
rx8freehk Posted October 10, 2016 Share Posted October 10, 2016 I'm able to connect to the server now and setup channels that persist through restarts, however I still cannot connect externally. How was this achieved, every time I restart the server it asks for a token and all channels are gone. Quote Link to comment
Bjonness406 Posted October 11, 2016 Share Posted October 11, 2016 I'm able to connect to the server now and setup channels that persist through restarts, however I still cannot connect externally. How was this achieved, every time I restart the server it asks for a token and all channels are gone. post your docker config (screenshot). Quote Link to comment
phate Posted October 21, 2016 Share Posted October 21, 2016 I'm having the exact same problem. EVERY time this docker updates I lose all my channels, and have to enter a new Server Admin key. Seems a few people are having this issue in this thread, yet no answers. Can we get a fix for this please? This issue makes this container almost useless. Quote Link to comment
CHBMB Posted October 22, 2016 Share Posted October 22, 2016 Why don't you post your config? Seems not everyone is affected and looking through the thread they're still trying to work out why the other person has issues.... Sent from my LG-H815 using Tapatalk Quote Link to comment
rx8freehk Posted October 22, 2016 Share Posted October 22, 2016 Fixed it after fiddling.... NETWORK = BRIDGE PRIVILEGED = ON On the bottom, click "Add another Path,Port, or Variable". Create the following: TCP 9987 UDP 30033 UDP 10011 Apply = Win I have no idea why these things are not in by default for Binhex or linuxserver, but can confirm this works with both. Quote Link to comment
Squid Posted October 22, 2016 Share Posted October 22, 2016 I have no idea why these things are not in by default for Binhex or linuxserver, but can confirm this works with both. Because if the template is set to run in Host mode, then there is no point in adding any ports to the template. Don't know about the privileged flag though. (And presumably both Binhex and lsio tested everything in host mode) Quote Link to comment
CHBMB Posted October 22, 2016 Share Posted October 22, 2016 It's because we run it in host mode. Both binhex and us kind of know what we're doing you know.... Sent from my LG-H815 using Tapatalk Quote Link to comment
rx8freehk Posted October 22, 2016 Share Posted October 22, 2016 Ya.. i could have reworded it differently so it wasn't offensive... my bad . This is what I had to do to get it to work. By all means please explain how to do it if this is not correct. Quote Link to comment
Pducharme Posted October 22, 2016 Share Posted October 22, 2016 Can you please post a snipped screenshot of the port forwarding config on your router. Sent from my SM-G900F using Tapatalk Thanks for the prompt reply! Was just busy pruning some unused apps but you can see I still have several forwarded ports and ranges, the only issues seem to be with the TS3 ports for some reason. Off Topic, but why Plex is a range? i just forward 32400 and it works well. Is there any benefits of using multiple ports ? Quote Link to comment
CHBMB Posted October 22, 2016 Share Posted October 22, 2016 Pducharme, as do I... Sent from my LG-H815 using Tapatalk Quote Link to comment
Bjonness406 Posted November 6, 2016 Share Posted November 6, 2016 Binhex, could you update this docker so then you update the docker itself/recreate it, the icons will not disappear from the server? Avatar icons are located at /usr/share/teamspeak3-server/sql/files/virtualserver_1/internal and channel icons are located at /usr/share/teamspeak3-server/sql/files/virtualserver_1/internal/icons Maybe add them to the config folder? Quote Link to comment
binhex Posted November 6, 2016 Author Share Posted November 6, 2016 Binhex, could you update this docker so then you update the docker itself/recreate it, the icons will not disappear from the server? Avatar icons are located at /usr/share/teamspeak3-server/sql/files/virtualserver_1/internal and channel icons are located at /usr/share/teamspeak3-server/sql/files/virtualserver_1/internal/icons Maybe add them to the config folder? Sure, thanks for the feedback Sent from my SM-G900F using Tapatalk Quote Link to comment
binhex Posted November 11, 2016 Author Share Posted November 11, 2016 Binhex, could you update this docker so then you update the docker itself/recreate it, the icons will not disappear from the server? Avatar icons are located at /usr/share/teamspeak3-server/sql/files/virtualserver_1/internal and channel icons are located at /usr/share/teamspeak3-server/sql/files/virtualserver_1/internal/icons Maybe add them to the config folder? This is now complete, please pull down latest and give it a whirl Quote Link to comment
Bjonness406 Posted November 12, 2016 Share Posted November 12, 2016 Binhex, could you update this docker so then you update the docker itself/recreate it, the icons will not disappear from the server? Avatar icons are located at /usr/share/teamspeak3-server/sql/files/virtualserver_1/internal and channel icons are located at /usr/share/teamspeak3-server/sql/files/virtualserver_1/internal/icons Maybe add them to the config folder? This is now complete, please pull down latest and give it a whirl Looks like it is working fine, thanks! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.