Guest Posted November 17, 2016 Share Posted November 17, 2016 Can you please post a snipped screenshot of the port forwarding config on your router. Sent from my SM-G900F using Tapatalk Thanks for the prompt reply! Was just busy pruning some unused apps but you can see I still have several forwarded ports and ranges, the only issues seem to be with the TS3 ports for some reason. Off Topic, but why Plex is a range? i just forward 32400 and it works well. Is there any benefits of using multiple ports ? https://support.plex.tv/hc/en-us/articles/201543147-What-network-ports-do-I-need-to-allow-through-my-firewall- >> also, when I try updating I'm getting this error: Configuration not found. Was this container created using this plugin? Any clue how to fix this? Do I just need to delete the image and container and start fresh? Quote Link to comment
binhex Posted November 17, 2016 Author Share Posted November 17, 2016 Can you please post a snipped screenshot of the port forwarding config on your router. Sent from my SM-G900F using Tapatalk Thanks for the prompt reply! Was just busy pruning some unused apps but you can see I still have several forwarded ports and ranges, the only issues seem to be with the TS3 ports for some reason. Off Topic, but why Plex is a range? i just forward 32400 and it works well. Is there any benefits of using multiple ports ? https://support.plex.tv/hc/en-us/articles/201543147-What-network-ports-do-I-need-to-allow-through-my-firewall- >> also, when I try updating I'm getting this error: Configuration not found. Was this container created using this plugin? Any clue how to fix this? Do I just need to delete the image and container and start fresh? ok not sure why your getting the configuration not found message, ive never seen that before, you can certainly do a deletion of the container and image and then re-pull again, if your still having issues then please screenshot the settings for the container (unraid web ui/docker tab/left click on the icon and select edit then click advanced view and post the screenshot) Quote Link to comment
benjinne Posted November 25, 2016 Share Posted November 25, 2016 I am trying to port my existing teamspeak server into this application. How do I do this? I can't seem to find where binhex is installing teamspeak to. Quote Link to comment
NitroEvil Posted March 11, 2017 Share Posted March 11, 2017 Where do you edit the whitelist.txt file? Can't seem to find it. Quote Link to comment
Grimmdus Posted May 26, 2017 Share Posted May 26, 2017 Hi, So I had a working ts3 server and one day it just wouldn't connect anymore. So i have tried reinstalling both the docker and the client and i have tried deleting the AppData manually to reset the server, the problem is when i go to log into create the server for the first time it doesn't ask for my privilege key is just attempts to connect then doesn't. Not sure if this means that it is still seeing the old server despite me deleting the AppData. Maybe i am missing a file somewhere? i have deleted the files taht exist in the appdata on the cache and on the main share. both folders named binhex teamspeak. The server even started up giving me the first time the important message with the privilege key. Not sure what is going on...any ideas or experience is greatly appreciated. Thanks, Grimmdus Quote Link to comment
binhex Posted May 26, 2017 Author Share Posted May 26, 2017 12 hours ago, Grimmdus said: Hi, So I had a working ts3 server and one day it just wouldn't connect anymore. So i have tried reinstalling both the docker and the client and i have tried deleting the AppData manually to reset the server, the problem is when i go to log into create the server for the first time it doesn't ask for my privilege key is just attempts to connect then doesn't. Not sure if this means that it is still seeing the old server despite me deleting the AppData. Maybe i am missing a file somewhere? i have deleted the files taht exist in the appdata on the cache and on the main share. both folders named binhex teamspeak. The server even started up giving me the first time the important message with the privilege key. Not sure what is going on...any ideas or experience is greatly appreciated. Thanks, Grimmdus make sure you are deleting on the unraid side whatever is mapped to /config, for example if /config is defined as folder /mnt/cache/appdata/config/teamspeak/ then delete all files/folders in the "teamspeak" folder. Quote Link to comment
Grimmdus Posted May 26, 2017 Share Posted May 26, 2017 Thanks for the reply, I ended up deleting the config folder again as well as uninstalling teamspeak client and its configs for a full wipe on both server and clientside. Worked this time around. Thanks for your hard work! Grimmdus Quote Link to comment
Boose77 Posted August 13, 2017 Share Posted August 13, 2017 Thanks for the docker, works great and was easy to setup! I just had one question... is it possible to get set up this docker twice? Is it as simple as just making a new docker with a different port? I was hoping to host both my brothers and my own teamspeak off my server. Thanks! Quote Link to comment
binhex Posted August 13, 2017 Author Share Posted August 13, 2017 1 hour ago, Boose77 said: Thanks for the docker, works great and was easy to setup! I just had one question... is it possible to get set up this docker twice? Is it as simple as just making a new docker with a different port? I was hoping to host both my brothers and my own teamspeak off my server. Thanks! yes, simply change the port mapping on the host side so that you dont get a port clash, oh and use a different host path for /config as well. 1 Quote Link to comment
Boose77 Posted August 13, 2017 Share Posted August 13, 2017 (edited) 56 minutes ago, binhex said: yes, simply change the port mapping on the host side so that you dont get a port clash, oh and use a different host path for /config as well. Thanks for the quick response! Edited August 13, 2017 by Boose77 Quote Link to comment
Boose77 Posted August 17, 2017 Share Posted August 17, 2017 (edited) Sorry one more question, i have another teamspeak server that i wanted to transfer to this docker... is that possible? What files do i need to have? Basically i have all the files, but when i drag them over into the docker folder so that i can migrate channels, icons, permissions, nothing shows up on docker restart... just a blank fresh server, Edited August 17, 2017 by Boose77 Quote Link to comment
binhex Posted August 17, 2017 Author Share Posted August 17, 2017 (edited) 7 hours ago, Boose77 said: Sorry one more question, i have another teamspeak server that i wanted to transfer to this docker... is that possible? What files do i need to have? Basically i have all the files, but when i drag them over into the docker folder so that i can migrate channels, icons, permissions, nothing shows up on docker restart... just a blank fresh server, ive never done this, but yeah it should be possible, one thing you will need to ensure is that the source teamspeak server is running the same version as the docker TS server (as close as possible) otherwise things like database etc wont import ok, im assuming the source teamspeak server is also linux right? if its windows then again you might run into issues with that. what you could try is slowly transition it over bit by bit, so stop the source TS server, stop the docker TS and then copy just the channels across, then start docker TS and see if that comes across ok, if it does then try icons etc. Edited August 17, 2017 by binhex 1 Quote Link to comment
Boose77 Posted August 18, 2017 Share Posted August 18, 2017 13 hours ago, binhex said: ive never done this, but yeah it should be possible, one thing you will need to ensure is that the source teamspeak server is running the same version as the docker TS server (as close as possible) otherwise things like database etc wont import ok, im assuming the source teamspeak server is also linux right? if its windows then again you might run into issues with that. what you could try is slowly transition it over bit by bit, so stop the source TS server, stop the docker TS and then copy just the channels across, then start docker TS and see if that comes across ok, if it does then try icons etc. It should be Linux, I'll check and make sure the old server is updated to the latest version and let you know. Thanks! Quote Link to comment
DeadChimi Posted August 26, 2017 Share Posted August 26, 2017 So maybe i'm being completely special, but for some reason I cannot get the default ports to change. Earlier I read there should be a way to change the default ports in the docker settings themselves, no dice I don't see it at all. I'm wanting to run a second instance of the docker, but it still starts up with the default ports even when manually entering in additional ports. Quote Link to comment
rx8freehk Posted January 3, 2018 Share Posted January 3, 2018 Cant get the serveradmin password to work trying to generate a new privilege key so trying to reset it. How do I use the additional parameter : serveradmin_password=MY_NEW_PASSWORD_HERE The linix example given here states the following: Linux example: ./ts3server_minimal_runscript.sh inifile=ts3server.ini serveradmin_password=test1234 I was thinking it could be accomplished utilizing the variable function in the container but I am unable to get it to work. Any suggestions? Quote Link to comment
binhex Posted January 4, 2018 Author Share Posted January 4, 2018 10 hours ago, rx8freehk said: Cant get the serveradmin password to work trying to generate a new privilege key so trying to reset it. How do I use the additional parameter : serveradmin_password=MY_NEW_PASSWORD_HERE The linix example given here states the following: Linux example: ./ts3server_minimal_runscript.sh inifile=ts3server.ini serveradmin_password=test1234 I was thinking it could be accomplished utilizing the variable function in the container but I am unable to get it to work. Any suggestions? if you want to reset then stop the container and then delete all files and folders for the host volume mapping /config then start it again, then check the supervisord.log file for the new key. Quote Link to comment
rx8freehk Posted January 5, 2018 Share Posted January 5, 2018 ugg... so I have to set everything back up? was tying to avoid that. Quote Link to comment
rx8freehk Posted February 25, 2018 Share Posted February 25, 2018 After update, Unable to connect to TS Quote Link to comment
Big Wig Posted February 25, 2018 Share Posted February 25, 2018 Same here but looking in logs and I'm finding this. " Please set the environment variable TS3SERVER_LICENSE to "accept" in order to accept the license agreement. Alternatively, create a file named ".ts3server_license_accepted" in the working directory or start the server with the command line parameter "license_accepted=1". To view the license agreement set TS3SERVER_LICENSE to "view" in order to print the license to the console. Alternatively view the file "LICENSE" in your favorite text viewer yourself." Trying to figure where to do the change. Big Quote Link to comment
wrightbaj Posted February 26, 2018 Share Posted February 26, 2018 (edited) On 2/24/2018 at 11:25 PM, rx8freehk said: After update, Unable to connect to TS Im in the same boat. Just updated and get the following in the logs: 2018-02-26 13:57:20.068386 [info] PUID defined as '99'2018-02-26 13:57:20.119727 [info] PGID defined as '100'2018-02-26 13:57:20.195647 [info] UMASK defined as '000'2018-02-26 13:57:20.235663 [info] Permissions already set for volume mappingschown: cannot access '/var/lib/teamspeak3-server/': No such file or directory e":"No such container: 61d96c22a624"} Edited February 26, 2018 by wrightbaj Quote Link to comment
Joeyleigh Posted February 26, 2018 Share Posted February 26, 2018 same - Seems like Permissions are screwed up Quote Link to comment
DaWord2011 Posted February 27, 2018 Share Posted February 27, 2018 (edited) 3 hours ago, Joeyleigh said: same - Seems like Permissions are screwed up Exact same logs as this ^. Teamspeak starts but does not run successfully. Edited February 27, 2018 by DaWord2011 additional information Quote Link to comment
blurb2m Posted February 27, 2018 Share Posted February 27, 2018 2 hours ago, DaWord2011 said: Exact same logs as this ^. Teamspeak starts but does not run successfully. Ditto. Quote Link to comment
blurb2m Posted February 27, 2018 Share Posted February 27, 2018 On 2/25/2018 at 6:52 AM, Big Wig said: Same here but looking in logs and I'm finding this. " Please set the environment variable TS3SERVER_LICENSE to "accept" in order to accept the license agreement. Alternatively, create a file named ".ts3server_license_accepted" in the working directory or start the server with the command line parameter "license_accepted=1". To view the license agreement set TS3SERVER_LICENSE to "view" in order to print the license to the console. Alternatively view the file "LICENSE" in your favorite text viewer yourself." Trying to figure where to do the change. Big @Big Wig This was the first problem I was having setting TS back up yesterday. Edit your docker for teamspeak and click the "Add another Path, Port, Variable or Device" Config type: Variable Name: TS3SERVER_LICENSE Key: TS3SERVER_LICENSE Value: accept But now we are having a permissions issue, so I'd say add the variable and you will have to wait for another update to fix the next issue. Quote Link to comment
binhex Posted February 27, 2018 Author Share Posted February 27, 2018 im aware of the issue guys, but i have been ill so haven't got around to taking a look, i will try my best to get some time to fix it up guys, sorry for the delay. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.