blodfjert Posted December 21, 2017 Share Posted December 21, 2017 1 hour ago, blodfjert said: Anyone care to help me?... Did some additional research. Ended up removing the docker and the appdata folder, reinstalled it and tried setting it up from scratch. Got the api working again by removing the "s" from the URL inside config -> downloaders, and changing the port from 8090 to 8080. SSL seems to be the suspect, perhaps because of certificate fu**up? Quote Link to comment
Cmc0619 Posted January 7, 2018 Share Posted January 7, 2018 So... NZBHydra2 (git) was announced today. The author could definitely use some help on the docker front as the one he released overwrites the config whenever a change is made to the template. Quote Link to comment
lostwebb Posted January 7, 2018 Share Posted January 7, 2018 8 hours ago, Cmc0619 said: So... NZBHydra2 (git) was announced today. The author could definitely use some help on the docker front as the one he released overwrites the config whenever a change is made to the template. Looking forward to this also. Not sure how to get it working by myself. Quote Link to comment
Cmc0619 Posted January 7, 2018 Share Posted January 7, 2018 Well... That's where the awesome Community Applications shines! You can search for nzbhydra and when it comes back with the results you just click 'Get more results from DockerHub', up towards the top of the screen, and then select the docker from the theotherp and configure it appropriately. That being said, it's more of a manual process and I'm super excited for linuxserver.io to come through for us! Quote Link to comment
lostwebb Posted January 7, 2018 Share Posted January 7, 2018 1 hour ago, Cmc0619 said: Well... That's where the awesome Community Applications shines! You can search for nzbhydra and when it comes back with the results you just click 'Get more results from DockerHub', up towards the top of the screen, and then select the docker from the theotherp and configure it appropriately. That being said, it's more of a manual process and I'm super excited for linuxserver.io to come through for us! I did that, and it wouldn't work even after manually configuring it. I have installed it from the command line and got it working now Quote Link to comment
omfgunraid Posted January 8, 2018 Share Posted January 8, 2018 (edited) For the guys that want to test this and don't want to mess around with the command line, I made a template off of binxex's old hyra1 which can help you. Go to the Docker tab and add this : https://github.com/tuxcomputing/unraid-templates in "template repositories" and then Save. Then Add Container and select the template "hydra2". You will see the normal hydra1/unraid settings plus a few new ones (see picture). IMPORTANT: Make sure you set the IP to the internal network IP where your unraid server is located, ie 192.168.11.22 ete in the HOST field. Everything should be easy from there on. Annoyances: - it might not start the first time, you might need to stop-start/restart the container once until it starts off (check the logs!) -I did not manage to get the hydra icon to show up (i'm a noob) Security: I did not add any code except from what binhex already had on hydra1. All code can be tested on the github link Bugs: There are a few, please check the official github here: https://github.com/theotherp/nzbhydra2/issues Remember that this is still a work in process for the developer and it will take some time before a decent container comes out. (ie. not my fault if your stuff breaks) Edited January 8, 2018 by omfgunraid 1 Quote Link to comment
sureguy Posted January 9, 2018 Share Posted January 9, 2018 Not sure about the IP address instructions. I just set the HOST field to unRAID's IP address, as that's how I was accessing hydra1. That worked properly. Other than that everything worked fine (migrated install from hydra1 without issue). Thanks for your work. 13 hours ago, omfgunraid said: For the guys that want to test this and don't want to mess around with the command line, I made a template off of binxex's old hyra1 which can help you. Go to the Docker tab and add this : https://github.com/tuxcomputing/unraid-templates in "template repositories" and then Save. Then Add Container and select the template "hydra2". You will see the normal hydra1/unraid settings plus a few new ones (see picture). IMPORTANT: Make sure you set the IP to the internal network IP where your unraid server is located, ie 192.168.11.22 ete in the HOST field. Everything should be easy from there on. Annoyances: - it might not start the first time, you might need to stop-start/restart the container once until it starts off (check the logs!) -I did not manage to get the hydra icon to show up (i'm a noob) Security: I did not add any code except from what binhex already had on hydra1. All code can be tested on the github link Bugs: There are a few, please check the official github here: https://github.com/theotherp/nzbhydra2/issues Remember that this is still a work in process for the developer and it will take some time before a decent container comes out. (ie. not my fault if your stuff breaks) Quote Link to comment
bmdegraaf Posted February 9, 2018 Share Posted February 9, 2018 My v1 database is quite large. How do I increase the memory settings? Keep getting java heap error messages when migrating. Quote Link to comment
CHBMB Posted February 9, 2018 Share Posted February 9, 2018 8 minutes ago, bmdegraaf said: My v1 database is quite large. How do I increase the memory settings? Keep getting java heap error messages when migrating. I'm not sure you can, have you tried v2? Quote Link to comment
bmdegraaf Posted February 9, 2018 Share Posted February 9, 2018 Sorry, I was not to clear. I am trying to migrate my v1 database into v2 Quote Link to comment
CHBMB Posted February 9, 2018 Share Posted February 9, 2018 Just now, bmdegraaf said: Sorry, I was not to clear. I am trying to migrate my v1 database into v2 So you're getting java heap error messages in V2 when trying to import your existing database? Quote Link to comment
bmdegraaf Posted February 10, 2018 Share Posted February 10, 2018 So you're getting java heap error messages in V2 when trying to import your existing database?That is correct. It is recommended to temporarily increase memory when importing a big database by using parameter xmx 512. But how does one do this in a docker environment? Quote Link to comment
CHBMB Posted February 10, 2018 Share Posted February 10, 2018 51 minutes ago, bmdegraaf said: That is correct. It is recommended to temporarily increase memory when importing a big database by using parameter xmx 512. But how does one do this in a docker environment? Via the webui Quote Link to comment
bmdegraaf Posted February 10, 2018 Share Posted February 10, 2018 Via the webui That did the trick. Thanks! The migration did not go 100% for the settings, but hey, .... it’s still in beta. Quote Link to comment
squirrellydw Posted March 13, 2018 Share Posted March 13, 2018 So why is a reverse proxy recommend? I never used one and have no idea how to set it up. I currently use NZBGet, Sonarr and Radarr. Is it safe to run it without one? I don't have any issues with my current setup but I understand you can put all your indexers in it and point sonarr and radarr to it. Quote Link to comment
CHBMB Posted March 13, 2018 Share Posted March 13, 2018 20 minutes ago, squirrellydw said: So why is a reverse proxy recommend? I never used one and have no idea how to set it up. I currently use NZBGet, Sonarr and Radarr. Is it safe to run it without one? I don't have any issues with my current setup but I understand you can put all your indexers in it and point sonarr and radarr to it. Only needed if you're accessing this from WAN. If you're only using it locally, not really required. Overall the benefit of a reverse proxy is you only need to open 80/443 or even just 443 to WAN instead of a ton of ports for all your applications. You're correct on your understanding of what this container does. Quote Link to comment
squirrellydw Posted March 13, 2018 Share Posted March 13, 2018 thanks, I have it installed now to figure out how to do everything. Any good videos out there? If not I will just figure it out Quote Link to comment
CHBMB Posted March 13, 2018 Share Posted March 13, 2018 thanks, I have it installed now to figure out how to do everything. Any good videos out there? If not I will just figure it outNot that I'm aware of, but@gridrunner may have one, spaceinvaderone on YouTube is his channel. Worth checking there, but it's pretty self explanatory.Sent from my LG-H815 using Tapatalk Quote Link to comment
Sean M. Posted April 8, 2018 Share Posted April 8, 2018 Was setting up NZBHydra this morning, configured the downloaders and indexers, restarted and am getting a "fatal error occurred" a little googling pointed me to that the port was already in use / another instance of hydra was already running but I don't see that being the case. Any tips? Thanks! 2018-04-08 12:32:59,218 - INFO - nzbhydra - Dummy-3 - Exit registered. Stopping and closing database 2018-04-08 12:32:59,219 - INFO - nzbhydra - Dummy-3 - Database shut down 2018-04-08 12:33:00,179 - NOTICE - nzbhydra - MainThread - Starting NZBHydra 0.2.233 2018-04-08 12:33:00,179 - NOTICE - nzbhydra - MainThread - Base path is /app/hydra 2018-04-08 12:33:00,179 - NOTICE - nzbhydra - MainThread - Loading settings from /config/hydra/settings.cfg 2018-04-08 12:33:00,184 - INFO - log - MainThread - Logging to file /config/hydra/nzbhydra.log as defined in the command line 2018-04-08 12:33:00,185 - INFO - log - MainThread - Setting umask of log file /config/hydra/nzbhydra.log to 0640 2018-04-08 12:33:00,185 - INFO - nzbhydra - MainThread - Started 2018-04-08 12:33:00,185 - INFO - nzbhydra - MainThread - Loading database file /config/hydra/nzbhydra.db 2018-04-08 12:33:00,189 - INFO - nzbhydra - MainThread - Starting db 2018-04-08 12:33:00,190 - INFO - indexers - MainThread - Activated indexer NZBCat 2018-04-08 12:33:00,192 - INFO - indexers - MainThread - Activated indexer nzb.su 2018-04-08 12:33:00,194 - INFO - indexers - MainThread - Activated indexer NZBGeek 2018-04-08 12:33:00,196 - INFO - indexers - MainThread - Activated indexer Drunken Slug 2018-04-08 12:33:00,197 - INFO - indexers - MainThread - Activated indexer NZB Finder 2018-04-08 12:33:00,198 - NOTICE - nzbhydra - MainThread - Starting web app on 192.168.1.154:5075 2018-04-08 12:33:00,199 - NOTICE - nzbhydra - MainThread - Go to http://192.168.1.154:5075 for the frontend 2018-04-08 12:33:00,199 - INFO - web - MainThread - Running threaded server 2018-04-08 12:33:00,202 - ERROR - nzbhydra - MainThread - Fatal error occurred Traceback (most recent call last): File "/app/hydra/nzbhydra.py", line 214, in run web.run(host, port, basepath) File "/app/hydra/nzbhydra/web.py", line 1730, in run app.run(host=host, port=port, debug=config.settings.main.debug, threaded=config.settings.main.runThreaded, use_reloader=config.settings.main.flaskReloader) File "/app/hydra/libs/flask/app.py", line 772, in run run_simple(host, port, self, **options) File "/app/hydra/libs/werkzeug/serving.py", line 625, in run_simple inner() File "/app/hydra/libs/werkzeug/serving.py", line 603, in inner passthrough_errors, ssl_context).serve_forever() File "/app/hydra/libs/werkzeug/serving.py", line 506, in make_server passthrough_errors, ssl_context) File "/app/hydra/libs/werkzeug/serving.py", line 440, in __init__ HTTPServer.__init__(self, (host, int(port)), handler) File "/app/hydra/libs/SocketServer.py", line 420, in __init__ self.server_bind() File "/app/hydra/libs/BaseHTTPServer.py", line 108, in server_bind SocketServer.TCPServer.server_bind(self) File "/app/hydra/libs/SocketServer.py", line 434, in server_bind self.socket.bind(self.server_address) File "/app/hydra/libs/socket.py", line 228, in meth return getattr(self._sock,name)(*args) error: [Errno 99] Address not available Quote Link to comment
NewDisplayName Posted July 25, 2018 Share Posted July 25, 2018 (edited) Just a quick hint to all hydra users... upgrade to hydra 2 (also a linuxserverio docker avaible) its not only faster, i never got so many results back since i upgraded, really worth the pain. I recommend set it up from scratch tho. Edited July 25, 2018 by nuhll Quote Link to comment
JoergH Posted August 11, 2023 Share Posted August 11, 2023 Hi, I run the nzbhydra2 docker on my unraid system. I added binsearch, tried to search anything via Sonarr but get the message in the logfile that binsearch is only setup for searching internal searches. Where can I change it to use binsearch for all type of searches? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.