tr0910 Posted August 23, 2017 Share Posted August 23, 2017 I got flooded and lost a server with dual 2670 cpu, 128gb RAM, S2600CP2 mb in Intel P4000 cases. I need to value this for an insurance claim. What would an equivalent ready built dual Xeon server cost. Thankfully drives were not installed... Quote Link to comment
JonathanM Posted August 23, 2017 Share Posted August 23, 2017 1 hour ago, tr0910 said: I got flooded and lost a server with dual 2670 cpu, 128gb RAM, S2600CP2 mb in Intel P4000 cases. I need to value this for an insurance claim. What would an equivalent ready built dual Xeon server cost. Thankfully drives were not installed... You are probably going to need to submit an estimate to build from a vendor, since it's pretty much a custom item. I would ask your adjuster what exactly they want to see from you to validate your valuation. They may be thinking personal computer ~$300 to ~$500, and when you hit them with a $2000+ estimate for a refurbished equivalent they may balk a little. http://amzn.com/B01F1GM0IW Quote Link to comment
tr0910 Posted August 23, 2017 Share Posted August 23, 2017 17 minutes ago, jonathanm said: You are probably going to need to submit an estimate to build from a vendor, since it's pretty much a custom item. I would ask your adjuster what exactly they want to see from you to validate your valuation. They may be thinking personal computer ~$300 to ~$500, and when you hit them with a $2000+ estimate for a refurbished equivalent they may balk a little. http://amzn.com/B01F1GM0IW Thanks, this is perfect. No I expect that they will balk at more than this server. But it's a fight I have to fight. And they can be thankful that I don't claim for a new one. Could be $50,000 for a tricked out current gen server. Intel, though gougeth mightily.... Also there is this one too... http://a.co/3DnB0Xk Quote Link to comment
RAINMAN Posted August 24, 2017 Share Posted August 24, 2017 7 hours ago, tr0910 said: Thanks, this is perfect. No I expect that they will balk at more than this server. But it's a fight I have to fight. And they can be thankful that I don't claim for a new one. Could be $50,000 for a tricked out current gen server. Intel, though gougeth mightily.... Also there is this one too... http://a.co/3DnB0Xk I'm not sure how home insurance works there but here they would be responsible for a new server of equivalent specs not a refurbished one. I'd hit them up with what that server cost new at the time and go from there. Could work out well for you actually. Quote Link to comment
showstopper Posted August 24, 2017 Share Posted August 24, 2017 Most insurance in the UK have a single item value limit. So unless you specifically tell them they would only pay out whatever that limit is.Sent from my SM-G925F using Tapatalk Quote Link to comment
Naldinho Posted August 29, 2017 Share Posted August 29, 2017 .4Lots of people in this topic purchased the SC2600 from Natex -- have you been able to upgrade unRaid? I'm stuck on 6.2.4 -- have tried upgrading to 6.3 several times and always get a kernel panic error and then I have to roll-back to 6.2.4. Am I alone on this or have others had this issue? If yes how did solve it? 1 Quote Link to comment
Bungy Posted August 29, 2017 Share Posted August 29, 2017 10 minutes ago, Naldinho said: .4Lots of people in this topic purchased the SC2600 from Natex -- have you been able to upgrade unRaid? I'm stuck on 6.2.4 -- have tried upgrading to 6.3 several times and always get a kernel panic error and then I have to roll-back to 6.2.4. Am I alone on this or have others had this issue? If yes how did solve it? I have that same board and have not had those issues. Maybe try to backup your flash drive and then update with a clean flash drive? 1 Quote Link to comment
jtech007 Posted August 30, 2017 Share Posted August 30, 2017 (edited) 6 hours ago, Naldinho said: .4Lots of people in this topic purchased the SC2600 from Natex -- have you been able to upgrade unRaid? I'm stuck on 6.2.4 -- have tried upgrading to 6.3 several times and always get a kernel panic error and then I have to roll-back to 6.2.4. Am I alone on this or have others had this issue? If yes how did solve it? 5 hours ago, Bungy said: I have that same board and have not had those issues. Maybe try to backup your flash drive and then update with a clean flash drive? I had this same issue. Bungy is correct, trying a new flash drive (different brand) should get rid of the kernel panic and allow you to update. Edited August 30, 2017 by jtech007 Quote Link to comment
Naldinho Posted August 30, 2017 Share Posted August 30, 2017 Thank you. I'll try that. Quote Link to comment
RAINMAN Posted September 2, 2017 Share Posted September 2, 2017 On 8/30/2017 at 10:12 AM, Naldinho said: Thank you. I'll try that. Did that help? I have a different motherboard/processor but since 6.3 lots of kernel panics. I replaces motherboard, CPU, RAM, starting to feel fruitless lol. Quote Link to comment
Naldinho Posted September 3, 2017 Share Posted September 3, 2017 I haven't tried yet. Likely tomorrow or Monday. Quote Link to comment
Naldinho Posted November 7, 2017 Share Posted November 7, 2017 Finally got around to trying a different key -- no luck. There was a topic where someone had suggested a possible solution -- searching for that now without much luck. That possible solution as well as checking for a BIOS update are the only two things I can think to try. If anyone else has any suggestions I'd really appreciate them -- especially since now there is a second person with the same issue. Quote Link to comment
detz Posted November 9, 2017 Share Posted November 9, 2017 On 8/29/2017 at 7:32 PM, Bungy said: I have that same board and have not had those issues. Maybe try to backup your flash drive and then update with a clean flash drive? What key do you have that works. I've tried three now, same panic. I loved this board until it stopped allowing me to upgrade. Also, what version of the BIOS do you have? Quote Link to comment
GreenDolphin Posted January 18, 2018 Share Posted January 18, 2018 (Slightly offtopic for a best-deal thread, but I figure this is the best place for it, as anyone who bought one of the Xeon E5 V1s will likely be interested...) Turns out the Sandy Bridge Xeon E5 v1are affected by Spectre / Meltdown, and Intel does have some kind of microcode update: https://downloadcenter.intel.com/download/27431/Linux-Processor-Microcode-Data-File?product=64597 Anyone know what exactly the update addresses? Assuming there is a relevant fix, what would be the indicated action for an UnRAID user with such a CPU? Would this update likely be included in a Linux kernel update which would eventually trickle down to an UnRAID update? I understand Linux does have a general mechanism allowing a microcode update on boot, unlike other OSes, so it might need to be re-loaded on every boot but would still work. Quote Link to comment
S80_UK Posted January 18, 2018 Share Posted January 18, 2018 (edited) On 18/01/2018 at 12:21 AM, GreenDolphin said: (Slightly offtopic for a best-deal thread, but I figure this is the best place for it, as anyone who bought one of the Xeon E5 V1s will likely be interested...) Turns out the Sandy Bridge Xeon E5 v1are affected by Spectre / Meltdown, and Intel does have some kind of microcode update: https://downloadcenter.intel.com/download/27431/Linux-Processor-Microcode-Data-File?product=64597 Anyone know what exactly the update addresses? Assuming there is a relevant fix, what would be the indicated action for an UnRAID user with such a CPU? Would this update likely be included in a Linux kernel update which would eventually trickle down to an UnRAID update? I understand Linux does have a general mechanism allowing a microcode update on boot, unlike other OSes, so it might need to be re-loaded on every boot but would still work. Limetech have been pretty quick to get some of the initial kernel updates that address these vulnerabilities for some processors included (since the last RC released before 6.4.0) and I am sure they will continue to include these in a reasonbly timely manner as the microcode updates become available. As you imply, there is then no specific action required other than applying the new version of unRAID to your server. Limetech typically refernce the changes included in the release announcement for each update. Edited February 14, 2018 by S80_UK Typo Quote Link to comment
rxnelson Posted February 14, 2018 Share Posted February 14, 2018 Off topic but wondered if anyone who bought the intel P4000 series chassis swapped out the PSU. I asked in the hardware section. https://lime-technology.com/forums/topic/69362-intel-p4000-outgrowing-stock-power-supply-connections/ Thanks Quote Link to comment
NotYetRated Posted March 12, 2018 Share Posted March 12, 2018 Anyone here using a ASrock EP2C602? I am having some difficulty getting full speed out of my SSD's on any of the 14 ports. They are topping out at around 225MB/s. If I throw them on my LSI 9220-8i, I get the full ~550MB/s, however lose TRIM support. Quote Link to comment
Drider Posted April 11, 2018 Share Posted April 11, 2018 (edited) On 3/12/2018 at 12:54 PM, NotYetRated said: Anyone here using a ASrock EP2C602? I am having some difficulty getting full speed out of my SSD's on any of the 14 ports. They are topping out at around 225MB/s. If I throw them on my LSI 9220-8i, I get the full ~550MB/s, however lose TRIM support. I assume you're using the ASRock - EP2C602-4L/D16, if so I own two systems utilizing this board. Of the 14 SATA ports onboard, only 2 are full SATA III, (at least in unRAID, as the Marvell controlled ports have an issue in unRAID, I can't remember specifically what it was). I run 3 LSI 9211-8i's in IT mode, so all but my 2 cache SSD's are on the controllers. Edited April 11, 2018 by Drider 1 Quote Link to comment
BobPhoenix Posted April 11, 2018 Share Posted April 11, 2018 10 hours ago, Drider said: as the Marvell controlled ports have an issue in unRAID, I can't remember specifically what it was). For me it was dropping drives every couple of hours to couple of months without an apparent reason that I could determine. And that was when they were passed to a Windows VM and not part of the unRAID array. I would never even consider using drives in the array on the Marvel controller. I'm testing fate again with another marvel controller but this time it is drives running under unRAID but NOT part of the array. Needed 4+ ports on PCI not PCIe slot and my Silicon Image 3124 card was not recognized so had to use my SAT2-MV8 based Marvel controller. May have to research other cards if it starts dropping drives. Just tried cards I had on hand. Quote Link to comment
Drider Posted April 11, 2018 Share Posted April 11, 2018 (edited) Between my two servers I have 6 HBA controllers: In each system I have one Intel RS2WC80 and two Dell PERC H310's. All are LSI 9211-8i controllers Flashed to IT mode, and working great at full 6GB Transfer speeds. The Dells are a little more of a pain to flash to IT, but still relatively straight forward. (It's dealing with UEFI BiOS that takes the most time.) The H310's can be picked up on eBay fairly cheap now ~$50.00 or less.. EDIT: Just re-read your post, and realized you looking for PCI. Yeah ... do they even list those as antiques anymore? Edited April 11, 2018 by Drider Quote Link to comment
NotYetRated Posted April 12, 2018 Share Posted April 12, 2018 16 hours ago, Drider said: Between my two servers I have 6 HBA controllers: In each system I have one Intel RS2WC80 and two Dell PERC H310's. All are LSI 9211-8i controllers Flashed to IT mode, and working great at full 6GB Transfer speeds. The Dells are a little more of a pain to flash to IT, but still relatively straight forward. (It's dealing with UEFI BiOS that takes the most time.) The H310's can be picked up on eBay fairly cheap now ~$50.00 or less.. EDIT: Just re-read your post, and realized you looking for PCI. Yeah ... do they even list those as antiques anymore? Do those support TRIM for SSD's? I've got 3 SSD's in the system currently... Quote Link to comment
Drider Posted April 12, 2018 Share Posted April 12, 2018 4 hours ago, NotYetRated said: Do those support TRIM for SSD's? I've got 3 SSD's in the system currently... Hmm.. I'm not sure. I'm finalizing setup of my newer machine now, so I can test it out. I planed to run Microsoft Hyper-V Core, with unRAID as a VM inside, so I' not sure if that will effect the results or not... I should know more this weekend. Quote Link to comment
pengrus Posted May 10, 2018 Share Posted May 10, 2018 So can any of you savvy individuals comment on this deal? https://natex.us/4uS7050/ Seems too good to be true... Thanks! -P Quote Link to comment
squark Posted May 10, 2018 Share Posted May 10, 2018 On 4/13/2018 at 5:37 AM, Drider said: Hmm.. I'm not sure. I'm finalizing setup of my newer machine now, so I can test it out. I planed to run Microsoft Hyper-V Core, with unRAID as a VM inside, so I' not sure if that will effect the results or not... I should know more this weekend. It think you'll find its pretty hard to pass the USB through to the VM. Quote Link to comment
c3 Posted May 10, 2018 Share Posted May 10, 2018 10 hours ago, pengrus said: So can any of you savvy individuals comment on this deal? https://natex.us/4uS7050/ Seems too good to be true... Thanks! -P natex is real and they do have good deals, which often run out. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.