Inimical Posted February 5, 2016 Share Posted February 5, 2016 Can someone help me understand this smart report, in particular the end-to-end error? Is the drive failing? Thanks. # Attribute Name Flag Value Worst Threshold Type Updated Failed Raw Value 1 Raw read error rate 0x000f 119 099 006 Pre-fail Always Never 231300896 3 Spin up time 0x0003 094 093 000 Pre-fail Always Never 0 4 Start stop count 0x0032 096 096 020 Old age Always Never 4180 5 Reallocated sector count 0x0033 100 100 010 Pre-fail Always Never 0 7 Seek error rate 0x000f 072 060 030 Pre-fail Always Never 14945797 9 Power on hours 0x0032 077 077 000 Old age Always Never 20873 (2y, 4m, 17d, 17h) 10 Spin retry count 0x0013 100 100 097 Pre-fail Always Never 0 12 Power cycle count 0x0032 100 100 020 Old age Always Never 19 184 End-to-end error 0x0032 099 099 099 Old age Always FAILING NOW 1 187 Reported uncorrect 0x0032 100 100 000 Old age Always Never 0 188 Command timeout 0x0032 100 100 000 Old age Always Never 0 189 High fly writes 0x003a 074 074 000 Old age Always Never 26 190 Airflow temperature cel 0x0022 066 056 045 Old age Always Never 34 (min/max 26/35) 191 G-sense error rate 0x0032 100 100 000 Old age Always Never 0 192 Power-off retract count 0x0032 100 100 000 Old age Always Never 19 193 Load cycle count 0x0032 098 098 000 Old age Always Never 4180 194 Temperature celsius 0x0022 034 044 000 Old age Always Never 34 (0 16 0 0 0) 197 Current pending sector 0x0012 100 100 000 Old age Always Never 0 198 Offline uncorrectable 0x0010 100 100 000 Old age Offline Never 0 199 UDMA CRC error count 0x003e 200 200 000 Old age Always Never 0 Quote Link to comment
itimpi Posted February 5, 2016 Share Posted February 5, 2016 If any attribute says FAILING NOW then you should assume that the disk could stop working at any time and should be replaced ASAP. Quote Link to comment
gundamguy Posted February 5, 2016 Share Posted February 5, 2016 An 184 End-To-End error means most likely that the drive cache is going bad. (Not cache drive, that hard drive's specific write cache) This error happens when data written to the drives cache and data written on the hard drives parity check fails. Seems like it should be replaced. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.