Bjonness406 Posted March 24, 2016 Share Posted March 24, 2016 Movies are working fine, but trying to add TV shows gives the error "Couldn't submit request, please try again" and the log shows "Error getting TVDB ID, none found!" It says this for any show I try So after a bit of investigating it turned out it was indeed an error with the TVDB api that was fixed in 1.7.4 asked Sparklyball to trigger an update to the container, turns out he'd already done it... Got to hand it to him sometimes, he's efficient. Check for docker updates and update the container. Should be good. No update yet, tried to update. I dont get the same error, I get this one on TV Shows, but it is working fine on Movies. "Couldn't submit request, please try again!" Quote Link to comment
CHBMB Posted March 24, 2016 Share Posted March 24, 2016 It's not an autoupdating container. Click "Check for Updates" on the docker screen. Quote Link to comment
Bjonness406 Posted March 24, 2016 Share Posted March 24, 2016 It's not an autoupdating container. Click "Check for Updates" on the docker screen. I have, no update there. Quote Link to comment
CHBMB Posted March 24, 2016 Share Posted March 24, 2016 It's not an autoupdating container. Click "Check for Updates" on the docker screen. I have, no update there. Guess it must just take a while to propogate Quote Link to comment
Techn0mancer Posted March 24, 2016 Share Posted March 24, 2016 Still no update being found and github says last update was 22 days ago. Is it normal for updates to take over 11 hours to propagate? Quote Link to comment
sparklyballs Posted March 24, 2016 Share Posted March 24, 2016 Still no update being found and github says last update was 22 days ago. Is it normal for updates to take over 11 hours to propagate? force update Quote Link to comment
Techn0mancer Posted March 24, 2016 Share Posted March 24, 2016 If by "force update" you mean the "Check for updates" button, I've done that. Just now, even, and it still says up to date. Quote Link to comment
sparklyballs Posted March 24, 2016 Share Posted March 24, 2016 If by "force update" you mean the "Check for updates" button, I've done that. Just now, even, and it still says up to date. no, i mean the force update option on the docker tab in the unraid gui. you may have to click advanced view on the right hand to expose it. Quote Link to comment
Techn0mancer Posted March 24, 2016 Share Posted March 24, 2016 I didn't realize that was there, but it did the trick! Thank you very much Quote Link to comment
Bjonness406 Posted March 24, 2016 Share Posted March 24, 2016 If by "force update" you mean the "Check for updates" button, I've done that. Just now, even, and it still says up to date. no, i mean the force update option on the docker tab in the unraid gui. you may have to click advanced view on the right hand to expose it. Thanks! Why not push a normal update? Would be easier. Quote Link to comment
sparklyballs Posted March 24, 2016 Share Posted March 24, 2016 If by "force update" you mean the "Check for updates" button, I've done that. Just now, even, and it still says up to date. no, i mean the force update option on the docker tab in the unraid gui. you may have to click advanced view on the right hand to expose it. Thanks! Why not push a normal update? Would be easier. it is a normal pushed update, the force update option is an unraid thing and a pull. Quote Link to comment
Bjonness406 Posted March 24, 2016 Share Posted March 24, 2016 If by "force update" you mean the "Check for updates" button, I've done that. Just now, even, and it still says up to date. no, i mean the force update option on the docker tab in the unraid gui. you may have to click advanced view on the right hand to expose it. Thanks! Why not push a normal update? Would be easier. it is a normal pushed update, the force update option is an unraid thing and a pull. But why does it not show then you search for updates then? Quote Link to comment
sparklyballs Posted March 24, 2016 Share Posted March 24, 2016 If by "force update" you mean the "Check for updates" button, I've done that. Just now, even, and it still says up to date. no, i mean the force update option on the docker tab in the unraid gui. you may have to click advanced view on the right hand to expose it. Thanks! Why not push a normal update? Would be easier. it is a normal pushed update, the force update option is an unraid thing and a pull. But why does it not show then you search for updates then? because the check for updates thing is something of a hack to provide a feature that docker doesn't actually have, and is somewhat hit and miss, especially with manually pushed images. Quote Link to comment
Rick Sanchez Posted March 25, 2016 Share Posted March 25, 2016 I have set up a Plex requests, all of the downloaders, e.t.c. settings are working but if somebody sends a request through it displays this message: "Couldn't submit request. Please try again." Have I missed a setting which is causing this problem? Quote Link to comment
Inimical Posted March 25, 2016 Share Posted March 25, 2016 I have set up a Plex requests, all of the downloaders, e.t.c. settings are working but if somebody sends a request through it displays this message: "Couldn't submit request. Please try again." Have I missed a setting which is causing this problem? The issue is the same for both shows and movies? Have you enabled and tested CP\Sonarr config from within PR? Quote Link to comment
Rick Sanchez Posted March 25, 2016 Share Posted March 25, 2016 Movie requests work TV requests do not Quote Link to comment
Inimical Posted March 25, 2016 Share Posted March 25, 2016 API to your tv client connects successfully in PR settings? Quote Link to comment
Bjonness406 Posted March 25, 2016 Share Posted March 25, 2016 Movie requests work TV requests do not Tried to force an update from unraid? You need to click the advanced view to see the option. Quote Link to comment
Rick Sanchez Posted March 25, 2016 Share Posted March 25, 2016 All working now thank you all for your help Quote Link to comment
swells Posted March 29, 2016 Share Posted March 29, 2016 I got this installed and everything appears to be working. When I go to approve a TV request, it fails with an error. In the logs I see an error that appears to have a time stamp around when the request was made "TVMAZESearch Error -> Cannot read property 'medium' of null". Any ideas what is causing this? Quote Link to comment
Bjonness406 Posted March 29, 2016 Share Posted March 29, 2016 I got this installed and everything appears to be working. When I go to approve a TV request, it fails with an error. In the logs I see an error that appears to have a time stamp around when the request was made "TVMAZESearch Error -> Cannot read property 'medium' of null". Any ideas what is causing this? Tried to force an update from unraid? You need to click the advanced view to see the option. Quote Link to comment
swells Posted March 29, 2016 Share Posted March 29, 2016 That kind of fixed it. I was able to approve the request and now some searches are failing with the same error for shows I know exist. Seems Movies work fine, haven't had any fail. Shows are hit or miss. I can search for a couple that will work fine and a few will fail. The log errors are all the same as listed above. Quote Link to comment
cirkator Posted March 31, 2016 Share Posted March 31, 2016 Hi, there seems to be a new update available for plexrequests and it is fixing the tvmaze error described above. Latest commit: Resolved issue with TVMaze search results not being indexed correctly. Could the marvelous LS.io devs please update this docker. Thanks in advance Quote Link to comment
sparklyballs Posted March 31, 2016 Share Posted March 31, 2016 Hi, there seems to be a new update available for plexrequests and it is fixing the tvmaze error described above. Latest commit: Resolved issue with TVMaze search results not being indexed correctly. Could the marvelous LS.io devs please update this docker. Thanks in advance updated Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.