snuffy1pro Posted June 29, 2020 Share Posted June 29, 2020 (edited) Hello was there an update last night or this morining? I was watching till pretty late last night, 3am, then went to bed. This morning everything is gone. All libraries, everything. I tried to log in only to see the default set up page... I have had Emby running on my server for years with no issues, now everything is gone. Appdata shows nothing for libraries it seems like all the DB were deleted along with all settings... The docker setup is the only thing not missing, it is still correct. Is there a way to recover, and moreover what happened? Edited June 29, 2020 by snuffy1pro Quote Link to comment
binhex Posted June 30, 2020 Author Share Posted June 30, 2020 (edited) 17 hours ago, snuffy1pro said: Hello was there an update last night or this morining? nope, last build was 18 days ago. 17 hours ago, snuffy1pro said: now everything is gone. Appdata shows nothing for libraries it seems like all the DB were deleted along with all settings... The docker setup is the only thing not missing, it is still correct. this sounds like it could be 'mover' causing you issues, check your array and see if your files are now located on the array, if so then 'mover' has moved the files from your cache drive to the array. if this is the case then you will need to prevent mover by setting your appdata share to 'use cache' = 'only' and then of course move your files back to their original location, restart the container and you should be good to go. Edited June 30, 2020 by binhex Quote Link to comment
Jacob Thompson Posted July 27, 2020 Share Posted July 27, 2020 I can't get the hardware transcoding to work right now either. I just built this server last week, Intel I5-10400 processor and running the latest binhex-emby docker container. I have done all the steps in this thread and added the variables to the container settings (GIDLIST = 18, /dev/dri/renderD128) and even added their APP_UID and APP_GID after the first two alone didn't work, even though I'm pretty sure those are now replaced with PUID and PGID in the initial container settings. I installed the intel-gpu-tools container to confirm that my system is finding the GPU correctly and it is. I have a DisplayPort Headless plug in to make sure the GPU is active and enabled all the appropriate settings in the BIOS for it. The emby container still isn't finding the GPU: I do have a valid Emby Premiere key in place. So.... now what? Has something changed in recent releases on what the variable names need to be to find the GPU? Quote Link to comment
thymon Posted October 3, 2020 Share Posted October 3, 2020 Hello ! New update is coming for this docker ? 😛 4.5.1.0 Quote Link to comment
Keek Uras Posted October 3, 2020 Share Posted October 3, 2020 1 hour ago, thymon said: Hello ! New update is coming for this docker ? 😛 4.5.1.0 I was wondering the same. It was released 4 days ago. Here are the fixes in the new version: Resolve install failures on certain Synology NAS models Fix include by tags feature returning incorrect content in certain situations Fix SSL http2 errors on Windows 8 & 2012 Fix connection issues when used with HAProxy Fix local network address detection causing virtual adapters to be preferred Don't try to schedule wakes when running as windows service Fix audio podcast playback on mono-based platforms Update MovieDb plugin to 1.3.7 Thanks! Quote Link to comment
jmcconathy Posted October 4, 2020 Share Posted October 4, 2020 I am also looking for the new update. Any news on when or if? Quote Link to comment
Skrumpy Posted October 4, 2020 Share Posted October 4, 2020 Also was wondering on the update, it shows 4.5 up as part of releases at least. Don't think anything is too critical in that update either. Hopefully everything is OK with you @binhex! Quote Link to comment
binhex Posted October 5, 2020 Author Share Posted October 5, 2020 10 hours ago, Skrumpy said: Also was wondering on the update, it shows 4.5 up as part of releases at least. Don't think anything is too critical in that update either. Hopefully everything is OK with you @binhex! when its updated on here, then it will be automatically built:- https://www.archlinux.org/packages/community/x86_64/emby-server/ Quote Link to comment
thymon Posted October 10, 2020 Share Posted October 10, 2020 On 10/5/2020 at 10:52 AM, binhex said: when its updated on here, then it will be automatically built:- https://www.archlinux.org/packages/community/x86_64/emby-server/ 4.5.0.50 Why my Server is on 4.4.3.0 ? Quote Link to comment
strike Posted October 10, 2020 Share Posted October 10, 2020 14 minutes ago, thymon said: 4.5.0.50 Why my Server is on 4.4.3.0 ? Have you checked for updates? Quote Link to comment
thymon Posted October 10, 2020 Share Posted October 10, 2020 2 minutes ago, strike said: Have you checked for updates? The Docker is up-to-update Quote Link to comment
strike Posted October 10, 2020 Share Posted October 10, 2020 1 minute ago, thymon said: The Docker is up-to-update Then do a force update Quote Link to comment
thymon Posted October 10, 2020 Share Posted October 10, 2020 1 minute ago, strike said: Then do a force update Yes, nothing else... No update for the docker. But update needed on Emby sever. I must to do manualy ? How to do ? Quote Link to comment
strike Posted October 10, 2020 Share Posted October 10, 2020 Just now, thymon said: Yes, nothing else... No update for the docker. But update needed on Emby sever. I must to do manualy ? How to do ? So you did a force update? Are you running a specific tag? Edit the docker, what do you have in the Repository: field? You might have to switch to advanced view in the top right corner to see it Quote Link to comment
thymon Posted October 10, 2020 Share Posted October 10, 2020 11 minutes ago, strike said: So you did a force update? Are you running a specific tag? Edit the docker, what do you have in the Repository: field? You might have to switch to advanced view in the top right corner to see it yes, excatly Quote Link to comment
tjb_altf4 Posted October 11, 2020 Share Posted October 11, 2020 3 hours ago, thymon said: 4.5.0.50 Why my Server is on 4.4.3.0 ? Same, guessing it's an issue with the upstream maintainer not updating package correctly Quote Link to comment
Erhnam Posted October 12, 2020 Share Posted October 12, 2020 So some are getting the update and some don't? I haven't got it. Tried force update but it didn't work Quote Link to comment
binhex Posted October 12, 2020 Author Share Posted October 12, 2020 51 minutes ago, Erhnam said: So some are getting the update and some don't? I haven't got it. Tried force update but it didn't work ok ive just re-create the image, its now up to version 4.5.0.50 next release is still waiting on arch linux:- https://www.archlinux.org/packages/community/x86_64/emby-server/ 1 Quote Link to comment
Erhnam Posted October 13, 2020 Share Posted October 13, 2020 It did the trick. Thanks Quote Link to comment
touz Posted December 11, 2020 Share Posted December 11, 2020 Has anyone been able to enable quick sync with this container? I have an i3-10100 cpu and enabled iGPU in the bios. I'm able to see the iGPU in /dev/dri, pass the /dev/dri device has a parameter for the container, but I can't see the iGPU in the transcoding section in Emby, under Advanced. Quote Link to comment
strike Posted December 11, 2020 Share Posted December 11, 2020 24 minutes ago, touz said: Has anyone been able to enable quick sync with this container? I have an i3-10100 cpu and enabled iGPU in the bios. I'm able to see the iGPU in /dev/dri, pass the /dev/dri device has a parameter for the container, but I can't see the iGPU in the transcoding section in Emby, under Advanced. I don't think hardware transcoding is working in this container. IIRC there have been lots of people in this thread complaining about it not working. Switch to the official emby container or the linuxserver one. Quote Link to comment
touz Posted December 11, 2020 Share Posted December 11, 2020 45 minutes ago, strike said: I don't think hardware transcoding is working in this container. IIRC there have been lots of people in this thread complaining about it not working. Switch to the official emby container or the linuxserver one. After many hours of headache, you are my savior. Took me 2 minutes to setup with the linuxserver docker. Thank you, kind man Quote Link to comment
xrqp Posted February 14, 2021 Share Posted February 14, 2021 (edited) deleted post. I got it to work by re-doing my HDHomerun tuner. Edited February 15, 2021 by xrqp Quote Link to comment
thymon Posted March 5, 2021 Share Posted March 5, 2021 (edited) Hello ! How to do for use GPU transcode like the last Space Invader one’s tutorial : What variable use to do that ? I add NVIDIA_VISIBLE_DEVICES without success 😞 Thanks in advance ! Edited March 5, 2021 by thymon Quote Link to comment
tjb_altf4 Posted March 6, 2021 Share Posted March 6, 2021 6 hours ago, thymon said: What variable use to do that ? I add NVIDIA_VISIBLE_DEVICES without success 😞 Thanks in advance ! I'm guessing you missed adding --runtime=nvidia to extra parameters, as mentioned in the video around 10:00 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.