thymon Posted March 6, 2021 Share Posted March 6, 2021 (edited) 15 hours ago, tjb_altf4 said: I'm guessing you missed adding --runtime=nvidia to extra parameters, as mentioned in the video around 10:00 yes of course I did. @binhex any idea ? Please... 😢 Edited March 6, 2021 by thymon Quote Link to comment
enigma27 Posted May 13, 2021 Share Posted May 13, 2021 I am getting the same issue as THymon Added the 3 variables but Emby not showing gpu as transcoding not does it show the GPU if you change hardware transcoding to advance in the menu. Quote Link to comment
strike Posted May 13, 2021 Share Posted May 13, 2021 3 minutes ago, enigma27 said: I am getting the same issue as THymon Added the 3 variables but Emby not showing gpu as transcoding not does it show the GPU if you change hardware transcoding to advance in the menu. Hardware transcoding doesn't work in this container, reported by many people. Switch to the official one or the linuxserver one and you should be good. 1 Quote Link to comment
thymon Posted May 21, 2021 Share Posted May 21, 2021 (edited) @binhex Hello Binhex Next release of EMBY (4.6.0.50) is here Thx in advance ! I love your works. Great update can't wait LOL 😅 Edited May 22, 2021 by thymon Quote Link to comment
tjb_altf4 Posted November 22, 2021 Share Posted November 22, 2021 Emby updated overnight, but I had to roll back to 4.6.4.0-3-01 this morning as some (but not all) of my client devices couldn't connect. I believe this is an emby issue, but I thought I'd give people a heads up incase they face similar issues 1 Quote Link to comment
Burizado Posted November 30, 2021 Share Posted November 30, 2021 On 11/22/2021 at 6:39 PM, tjb_altf4 said: Emby updated overnight, but I had to roll back to 4.6.4.0-3-01 this morning as some (but not all) of my client devices couldn't connect. I believe this is an emby issue, but I thought I'd give people a heads up incase they face similar issues Same here. I don't use the docker much (setup as a secondary media docker). I started it after updating, and when I open the WebUI I just get a page with 'Forbidden'. I rolled back to 4.6.4.0-3-01 and the WebUI loads fine. I didn't see any errors in the log with version 4.6.6.0-1-01 or latest. Not a huge issue for me since as I mentioned this is a secondary docker I have just to test out other media library front ends. Plex is my main media front end. I just wanted to post that I see a similar issue and heads up if anyone else has a similar issue. Quote Link to comment
binhex Posted November 30, 2021 Author Share Posted November 30, 2021 9 hours ago, Burizado said: Same here. I don't use the docker much (setup as a secondary media docker). I started it after updating, and when I open the WebUI I just get a page with 'Forbidden'. I rolled back to 4.6.4.0-3-01 and the WebUI loads fine. I didn't see any errors in the log with version 4.6.6.0-1-01 or latest. Not a huge issue for me since as I mentioned this is a secondary docker I have just to test out other media library front ends. Plex is my main media front end. I just wanted to post that I see a similar issue and heads up if anyone else has a similar issue. that doesn't sound like the same issue to me, @tjb_altf4 indicated 'some (but not all) of my client devices couldn't connect.', not that he couldn't access the web ui of emby, in any case i can confirm the web ui loads fine for me on latest tagged image *shrug*. 1 Quote Link to comment
LakersFan Posted December 18, 2021 Share Posted December 18, 2021 Hi guys, hoping you can help me out. I have a user profile that I can’t log into. I left the password blank and it’s been working for months. Now when I try to sign in, it says invalid username or password. My username is my first name and it’s not hidden, so really you can just click it. So I know it’s not a username issue. So I clicked the forgot password button and try to reset it but it states to try again within your home network (which I’m already doing). Is there a file I can open and change (or delete) to clear the password without losing the data of the user… we have watched shows, etc that we’d lose if I just created a new user. Thank you! Quote Link to comment
PeteB Posted March 16, 2022 Share Posted March 16, 2022 Hi, Same issue as the guys above. On any version above 4.6.4.0-3-01 I get a FORBIDDEN message when trying to access the dashboard via web browser. From the logs I find the following: 2022-03-16 11:03:18.765 Info Server: http/1.1 GET http://192.168.1.169:8096/favicon.ico. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/99.0.4844.51 Safari/537.36 Edg/99.0.1150.39 2022-03-16 11:03:18.765 Info Server: http/1.1 Response 403 to 192.168.1.100. Time: 0ms. http://192.168.1.169:8096/favicon.ico I've been stuck on this version and waited to try with the latest version but have the same error. What could be the problem. Quote Link to comment
PeteB Posted March 18, 2022 Share Posted March 18, 2022 For those people with the FORBIDDEN problem above, I've managed to resolve it. Emby runs as a docker which NAT's the local address into another address used by the container. For me my home network is 192.68.1.0/24 and Emby's address is 172.17.0.4. With version 4.6.4 it didn't matter that my connection was coming from a different address range, but later versions recognise this and block the connection unless you specifically allow it. Under settings -> Network, there is a tick box "Allow remote connections to this Emby Server." Tick the box and problem is resolved. 1 Quote Link to comment
PeteB Posted March 20, 2022 Share Posted March 20, 2022 I've had confirmation from the developers that subsequent to 4.6.4 they "tightened up" the network checking! Quote Link to comment
imperious Posted May 7, 2022 Share Posted May 7, 2022 Hi I've been using emby now for over a year with no issues, today I cant watch anything I get; "No compatible streams are currently available. Please try again later or contact your system administrator for details." Quote Link to comment
LakersFan Posted May 7, 2022 Share Posted May 7, 2022 Just updated. I'm getting "Too many errors. Giving up" when trying to play anything. Quote Link to comment
KellyT Posted May 7, 2022 Share Posted May 7, 2022 17 hours ago, imperious said: Hi I've been using emby now for over a year with no issues, today I cant watch anything I get; "No compatible streams are currently available. Please try again later or contact your system administrator for details." Mine updated last night and now I'm getting the same message. In the logs it says "No video encoder found for 'h264'" Is there a way to roll back to the previous version? Quote Link to comment
montmyint Posted May 8, 2022 Share Posted May 8, 2022 (edited) 8 hours ago, KellyT said: Mine updated last night and now I'm getting the same message. In the logs it says "No video encoder found for 'h264'" Is there a way to roll back to the previous version? Yes, which is what I've done. What you do is edit the container and update the repository to add :TAG after the arch-emby bit like below I would check for updates on the docker hub for updates and only use the above as a workaround for now. Edited May 8, 2022 by montmyint Quote Link to comment
tjb_altf4 Posted May 8, 2022 Share Posted May 8, 2022 also rolled back to binhex/arch-emby:4.6.7.0-3-01 for the same reasons mentioned above, something is missing/broken in binhex/arch-emby:4.6.7.0-4-01 Quote Link to comment
binhex Posted May 8, 2022 Author Share Posted May 8, 2022 also rolled back to binhex/arch-emby:4.6.7.0-3-01 for the same reasons mentioned above, something is missing/broken in binhex/arch-emby:4.6.7.0-4-01Hi guys I will take a look at this tonightSent from my CLT-L09 using Tapatalk 2 Quote Link to comment
binhex Posted May 10, 2022 Author Share Posted May 10, 2022 On 5/8/2022 at 9:15 AM, binhex said: Hi guys I will take a look at this tonight Sent from my CLT-L09 using Tapatalk ok i did manage to take a look and it looks like a broken ffmpeg installation, i have flagged it as a bug upstream, link to bug report:- https://bugs.archlinux.org/task/74691 1 Quote Link to comment
binhex Posted May 10, 2022 Author Share Posted May 10, 2022 new image built, it turns out the upstream issue was a non issue in the end, i had forgotten i had switched over to using emby compiled ffmpeg as opposed to arch ffmpeg due to a bug in seek in later versions of ffmpeg. In any case i have now fixed it up and from my very brief poke around it looks ok, please pull down the latest image and let me know if its working ok for you guys. Quote Link to comment
tjb_altf4 Posted May 11, 2022 Share Posted May 11, 2022 3 hours ago, binhex said: new image built, it turns out the upstream issue was a non issue in the end, i had forgotten i had switched over to using emby compiled ffmpeg as opposed to arch ffmpeg due to a bug in seek in later versions of ffmpeg. In any case i have now fixed it up and from my very brief poke around it looks ok, please pull down the latest image and let me know if its working ok for you guys. new latest image is working for me, thanks! Quote Link to comment
user20C Posted May 13, 2022 Share Posted May 13, 2022 I updated to the new latest image and I am still getting an error. The new error is 2022-05-13 16:58:04.060 Error App: ProcessRun 'StreamTranscode 1c46dc': Error starting Ffmpeg. WorkingFolder: null Anyone have any ideas? Quote Link to comment
denzo Posted July 12, 2022 Share Posted July 12, 2022 How can I move my previous (Official) Emby to Binhex Emby? I have the "Official" Emby docker and would like to clone/copy all my settings, libraries, etc to the Binhex docker is there a streamlined way to do this without having to manually go through every setting in the new setup? Quote Link to comment
binhex Posted July 12, 2022 Author Share Posted July 12, 2022 How can I move my previous (Official) Emby to Binhex Emby? I have the "Official" Emby docker and would like to clone/copy all my settings, libraries, etc to the Binhex docker is there a streamlined way to do this without having to manually go through every setting in the new setup?If you can work out which files contain settings and your library etc then you should be able to simply copy and paste from one configuration set to the other as it is the same application (emby)Sent from my CLT-L09 using Tapatalk 1 Quote Link to comment
alos Posted July 16, 2022 Share Posted July 16, 2022 Not sure if this is an issue with the docker specifically or emby itself, but ever since 4.7.x screen grabber has not been working for me for thumbnail generation. Log of the error: https://pastebin.com/8wBhzTzQ I have tried going back to older version and all 4.6.X versions on the github work just fine, none of the 4.7.x versions work for me, no other settings changed. Would be grateful for any insight Unraid version 4.10.3 Quote Link to comment
PeterZ Posted July 21, 2022 Share Posted July 21, 2022 (edited) On 7/17/2022 at 2:21 AM, alos said: Not sure if this is an issue with the docker specifically or emby itself, but ever since 4.7.x screen grabber has not been working for me for thumbnail generation. Log of the error: https://pastebin.com/8wBhzTzQ I have tried going back to older version and all 4.6.X versions on the github work just fine, none of the 4.7.x versions work for me, no other settings changed. Would be grateful for any insight Unraid version 4.10.3 I have the same problem. The error occurs when process runs the 'ImageExtraction'. My Emby version is 4.7.5 and Unraid version is 4.10.3. Edited July 21, 2022 by PeterZ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.