FS: Sydney Australia: HP ProLiant G7 N54L Microserver 8GB with Custom Lian-Li Ex

[majorspawn]

HP ProLiant G7 N54L Microserver 8GB with Custom Lian-Li External 3 bay enclosure. Previously used as media storage NAS with UNRAID

 

Please see ebay post for pictures..

 

http://www.ebay.com.au/itm/182034298576?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

 

Specs:

 

    Processor:

        AMD Turion™ II Neo N54L (2.2GHz)

        AMD RS785E/SB820M chipset

    Memory:

        Two (2) DIMM slots

        8GB (2x4GB)  PC3-10600 DDR3 800MHz

    Storage Controller:

        Embedded AMD SATA controller with RAID 0, 1

        Embedded AMD eSATA controller for connecting external storage devices via the eSATA connector in the rear of the server

    Internal Drive Support:

        4 Internal SATA 3.5" HDD Support via Hotswap bay

        1 Internal SATA 3.5" HDD Support via Icydock DuoSwap bay

        1 Internal SATA 2.5" HDD Support via Icydock DuoSwap bay

        2 Internal SATA 3.5" HDD Support via external Lian-Li enclosure

        1 Internal SATA 2.5" HDD Support via external Lian-Li enclosure

        optional SSD 2.5" possible under IcyDock drive bay

 

This gives a possibility of a total of 10 drives., 6 native + 4 with a raid card installed (optional), read notes below

 

    Network Controller:

        Embedded NC107i PCI Express Gigabit Ethernet Server Adapter

    Expansion Slots:

        Slot 1: PCI-Express Gen 2 x16 connector with x16 link

        Slot 2: PCI-Express Gen 2 x1 connector with x1 Link

        Slot 2-2: PCI-Express x4 slot for optional management card

    USB 2.0 Ports:

        Seven (7) USB 2.0 ports: 4 front , 2 rear, 1 internal (for tape)

    Power Supply:

        150 Watts Non-Hot Plug, Non Redundant Power Supply

    Management:

        Optional MicroServer Remote Access Card

    Operating System:

        Supports Windows and Red Hat Linux

    Form Factor:

        Ultra Micro tower

 

Notes:

 

The N54L Microserver pictured comes with the following additions:

 

    8GB Ram PC3-10600 DDR3 800MHz

    Custom professionally made custom Lian-Li External enclosure with 2 x 3.5" sata drive bays and room below for an additional 1 x 2.5" drive such as SSD. The enclosure directly plugs into the back of the Microserver via 4 pin power supply cable and is powered via the existing Microserver power supply which is nice and neat.

    A IcyDock DuoSwap enclosure

    Sata to ESATA low profile bracket

 

 

Please note that the N54L comes with a total of 6 Sata connections, 4 via hotswap, 1 ESATA externally and 1 SATA onboard. To take advantage of the maximum 10 disks you will need an optional SAS / SATA  controller via the PCIE port (not included) and the pictured low profile 2 port Sata to ESATA bracket (included) Please note that the server comes stock with a 150W power supply, in order to run 10 disks a new power supply needs to be upgraded, a recommended power supply is the Seasonic SS-350M1U which provides a total of 32A on the 12V rail. (not included but recommended) This is the power supply that I have used with the unit previously.

 

Please feel free to ask any questions

 

I am also selling the a pair of KVR1333D3E9Sk2/16GB ECC UDIM Pair which is one of the only few ram types which work with the N54L and register 16GB of Ram. Please see my other items for sale if your interested as this ram was used with this server and works very well. Its also very hard to source.

 

Pick-up is preferred due to size and weight of items, pickup from Leichhardt 2040 business hours or Fairfield 2165 by appointment only

 

Looking for a local sale within Sydney will let go off the server + ram+ duoswap + external cage + bracket for $350 if sold privately.