Jens_Andersson Posted March 10, 2016 Share Posted March 10, 2016 i have replaced one of my disks with a bigger one and it is now rebuiling the new disk. i am not able to start my docker containers and my log i full of this message: Tower kernel: XFS (md3): xfs_log_force: error -5 returned. unraid is still rebuilding the array and is running ok 27 mb/sec 11 hours to complete. diagnostics is attached. tower-diagnostics-20160310-1301.zip Quote Link to comment
JorgeB Posted March 10, 2016 Share Posted March 10, 2016 You need to check the filesystem on disk3 (/dev/md3), you can do it now or when the rebuild finishes, now will be a lot slower, brain fart, you have to start in maintenance mode, so when it's over or only cancelling rebuild. https://lime-technology.com/wiki/index.php/Check_Disk_Filesystems#Drives_formatted_with_XFS Quote Link to comment
JorgeB Posted March 10, 2016 Share Posted March 10, 2016 Also, you have a Samsung HD203WI, these disks are very slow during rebuilds or parity checks with V6, your rebuild speed will improve a lot once you go over the 2TB mark. You should use you cache disk for the docker image. Quote Link to comment
Jens_Andersson Posted March 10, 2016 Author Share Posted March 10, 2016 Thanks, Yea im replacing the samsung with a WD red 3 gb disk when the rebuild and repair finishes. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.