UnRAID not seeing disks configured as RAID0 on LSI9266-4i

[TaylorM237]

Hello UnRAID community, after watching some people toy around with UnRAID I decided to give it a whirl and slapped it onto my server;

 

Intel Xeon E3-1220v2

8GB DDR3 ECC / U

12x Hitatchi 500GB 7,200RPM SATA drives connected to a LSI 9266-4i (Each disk is created as a individual RAID0 in attempt to get it to act as a JBOD array)

Supermicro - X9SCL/X9SCM Motherboard

 

Problem is, IOMMU is enabled, and under system devices it see's this,

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller (rev 09)

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)

00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)

00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 05)

00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)

00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)

00:1f.0 ISA bridge: Intel Corporation C202 Chipset Family LPC Controller (rev 05)

00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)

02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2208 [Thunderbolt] (rev 05)

03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection

04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection

05:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a)

 

On 02:00.0 the RAID card is detected, but under the "Main" tab, no disks can be found or assigned to the array.

 

If someone could help me with this, that'd be fantastic!

[nxtiak]

It's sort of pointless to have it in RAID0 and use unRAID.

What are you planning on using unRAID for?

[TaylorM237]

My RAID Card doesn't support JBOD, so the only option was to push them into RAID0 (individual disks) to have the RAID Card hand it off to the OS.

[nxtiak]

My RAID Card doesn't support JBOD, so the only option was to push them into RAID0 (individual disks) to have the RAID Card hand it off to the OS.

 

sorry, i misread the part that you made each disk a raid0

[mmgarci30]

Hi mate

 

To enable your board in JBOD you need to flash it to IT mode.

 

Your HBA, LSI 9266-4i is based on a SAS2208 chip as you can check in this Server@home post.

 

https://forums.servethehome.com/index.php?threads/lsi-raid-controller-and-hba-complete-listing-plus-oem-models.599/

 

So you can flash it to IT mode following the procedure for SAS2208 chips in this link

 

https://lime-technology.com/forum/index.php?topic=12767.0