March 15, 201610 yr My V6 server has been running for months now and I have made no recent changes. Today, I cannot access the Web GUI and it reports: This site can’t be reached 192.168.2.236 refused to connect. ERR_CONNECTION_REFUSED I am able to telnet in and tried a "Reboot". All I can see via SMB is Flash. I did run a Diagnostics from Telnet and have attached the zip file here. Can anyone please take a look and possibly suggest an action for me? I am a Linux infant, but can issue the commands I'm told to Thanks very much. tower-diagnostics-20160315-1627.zip
March 16, 201610 yr Community Expert emhttp segfaulting soon after bootup Mar 15 15:38:49 Tower kernel: emhttp[9553]: segfault at 7ffe85a0b000 ip 00002b8477f6667b sp 00007ffe85a097c8 error 6 in libc-2.17.so[2b8477eda000+1bf000] Try a memtest
March 16, 201610 yr Author Thanks very much trurl. I just started a memtest and so far (25%), all good. I'll let it run though and post back.
March 16, 201610 yr Thanks very much trurl. I just started a memtest and so far (25%), all good. I'll let it run though and post back. Run it all night. Multiple passes are needed to get a good run with memtest.
March 16, 201610 yr Author Memtest has now run for over 8-hours with no errors. What might I try next to get this box back online? I now see that upon reboot, I do connect to the Array webpage initially. However, if I click any other selection such as "Dashboard", my browser disconnects and says: This site can’t be reached 192.168.2.236 refused to connect. ERR_CONNECTION_REFUSED This is a really simple unRAiD box, no Plex or VM's, no Docker. Just a few shares for data storage. And it was running fine for months. I did not make any changes to the box before this problem. I do have a 2nd (spare) USB that I bought from Limetech with the server. Thanks for any suggestions.
March 16, 201610 yr My first thoughts would be to look at the machine via a keyboard and monitor and check to make sure the network adapter is up. ifconfig -a if it isn't its a start.
March 16, 201610 yr Author Thank you kizer. I'm pretty sure the NIC is up because I can Telnet into the box OK. This morning, I also pulled the USB and ran a chkdsk - all clean, no repairs necessary. I am willing to try any commands or diagnostics you can think of. I am also attaching a diagnostic from this morning if that is of any help. Thank's for the reply! tower-diagnostics-20160316-1005.zip
March 16, 201610 yr I'm seeing this in your syslog.txt Mar 16 08:43:24 Tower kernel: emhttp[9566]: segfault at 7ffcbc6f9000 ip 00002b92a8e4567b sp 00007ffcbc6f7738 error 6 in libc-2.17.so[2b92a8db9000+1bf000] Which means according to this http://rgeissert.blogspot.com/p/segmentation-fault-error.html The cause was a user-mode write resulting in no page being found. <---- which honestly makes no sense to me. Lol
March 16, 201610 yr Please update to latest release of unRAID stable (6.1.9 at the time of this posting).
March 16, 201610 yr Author Please update to latest release of unRAID stable (6.1.9 at the time of this posting). I'm feeling kind of foolish here, but I can't seem to find instructions on upgrading from older V6 (6.1.7) to newest stable V6 (6.1.9). I think I only copy over a couple of files, but need to be sure. Could you please point me to the docs? My setup is really stock with only the Pre_clear plugin as I recall. Many thanks.
March 16, 201610 yr Community Expert Could you please point me to the docs? Go to the Plugins page - you will see one for the unRAID OS. Press the Check for Updates button and that should give you the option to upgrade unRAID.
March 16, 201610 yr Author Could you please point me to the docs? Go to the Plugins page - you will see one for the unRAID OS. Press the Check for Updates button and that should give you the option to upgrade unRAID. But I can't get to the unRAID GUI, that's my whole problem. I can Telnet in however and I can also pull the USB from the box if I need to. The reason for this thread is that I can not access the Web GUI.
March 16, 201610 yr Community Expert Could you please point me to the docs? Go to the Plugins page - you will see one for the unRAID OS. Press the Check for Updates button and that should give you the option to upgrade unRAID. But I can't get to the unRAID GUI, that's my whole problem. I can Telnet in however and I can also pull the USB from the box if I need to. The reason for this thread is that I can not access the Web GUI. Just copy bzimage and bzroot from the downloaded zip to your flash.
March 16, 201610 yr Author Please update to latest release of unRAID stable (6.1.9 at the time of this posting). A huge Tip 'O The Hat to you jomp and to everyone who replied! Upgrading to V6.1.9 seems to have restored it all. Web GUI now accessible, disks mounted and parity check running. Thanks again for all the help.
Archived
This topic is now archived and is closed to further replies.