krone6 Posted March 20, 2016 Share Posted March 20, 2016 After upgrading to the new beta (and checking over all of the changes/warnings) the status in VM manager says disabled. I've changed some settings in advance mode to match where the files are located and it stayed that way. Turning it off and then on didn't solve it either. Is there something I can do to fix this otherwise I looks like it's back to 6.1.9? Pictures on request since I don't know what'd be relevant to everyone here. Thank you. ground-diagnostics-20160320-1047.zip Quote Link to comment
itimpi Posted March 20, 2016 Share Posted March 20, 2016 After upgrading to the new beta (and checking over all of the changes/warnings) the status in VM manager says disabled. I've changed some settings in advance mode to match where the files are located and it stayed that way. Turning it off and then on didn't solve it either. Is there something I can do to fix this otherwise I looks like it's back to 6.1.9? Pictures on request since I don't know what'd be relevant to everyone here. Thank you. Perhaps you should post a screenshot of where it says disabled? As far as I could see there was nowhere in VM Manager that displays that - the closest was whether Enable VM's was set to Yes or No - is that what you meant? Obviously to be able to run VMs this needs to be set to Yes. Quote Link to comment
krone6 Posted March 20, 2016 Author Share Posted March 20, 2016 Attached will be the screenshot of what I see. All of the file paths should be right with the status in the top right. My array is started I just took the picture before it was. After checking it didn't make a difference whether it was or not as the status still said disabled either way. Quote Link to comment
itimpi Posted March 20, 2016 Share Posted March 20, 2016 I changed the iso and vm image locations but I left the libvirt location unchanged and set as mnt/user/system/libvirt/libvirt.img (which ends up on the cache disk as the 'system' share is set as cache only. It might be worth leaving yours at that to see if it makes a difference. I think the VM settings from 6.1.9 are auto-migrated to that location. Quote Link to comment
saarg Posted March 20, 2016 Share Posted March 20, 2016 If I remember correctly, jonp said that libvirt.img has to be in the path or else it will not work. Was somewhere in the beta threads. Quote Link to comment
krone6 Posted March 20, 2016 Author Share Posted March 20, 2016 Tried a few new things though nothing's working. Where can I download the libvirt.img as I can't find it anywhere? Also I have two virtIO isos in my folder after downloading and cannot see them in explorer even with hidden files enabled. They show up in unRaid's GUI, though. Quote Link to comment
saarg Posted March 20, 2016 Share Posted March 20, 2016 Tried a few new things though nothing's working. Where can I download the libvirt.img as I can't find it anywhere? Also I have two virtIO isos in my folder after downloading and cannot see them in explorer even with hidden files enabled. They show up in unRaid's GUI, though. IT should be created by unraid. You did try to put libvirt.img in the path? Quote Link to comment
krone6 Posted March 20, 2016 Author Share Posted March 20, 2016 Tried a few new things though nothing's working. Where can I download the libvirt.img as I can't find it anywhere? Also I have two virtIO isos in my folder after downloading and cannot see them in explorer even with hidden files enabled. They show up in unRaid's GUI, though. IT should be created by unraid. You did try to put libvirt.img in the path? Yes, that was one of the new things I tried earlier. Quote Link to comment
krone6 Posted March 21, 2016 Author Share Posted March 21, 2016 Fixed it. libvirt.img cannot be anywhere other than /mnt/cache/libvirt.img even if you put it in a folder that /is/ the cache drive. It must specifically be that exact path. Once I make it /mnt/cache/libvirt.img the status changes. Quote Link to comment
itimpi Posted March 21, 2016 Share Posted March 21, 2016 Fixed it. libvirt.img cannot be anywhere other than /mnt/cache/libvirt.img even if you put it in a folder that /is/ the cache drive. It must specifically be that exact path. Once I make it /mnt/cache/libvirt.img the status changes. Well mine is at /mnt/user/system/libvirt/libvirt.img which is where the upgrade process put it and that works fine for me. Since the 'system' share is set as cache only that is a the same as /mnt/cache/system/libvirt/libvirt.img Quote Link to comment
krone6 Posted March 21, 2016 Author Share Posted March 21, 2016 Fixed it. libvirt.img cannot be anywhere other than /mnt/cache/libvirt.img even if you put it in a folder that /is/ the cache drive. It must specifically be that exact path. Once I make it /mnt/cache/libvirt.img the status changes. Well mine is at /mnt/user/system/libvirt/libvirt.img which is where the upgrade process put it and that works fine for me. Since the 'system' share is set as cache only that is a the same as /mnt/cache/system/libvirt/libvirt.img /mnt/user/Virtual Machines/libvirt.img is also cache only and didn't work for me so it's strange you had better luck than me. At least future users upgrading can look into this thread in case they run into similar and use what we've both experienced. Quote Link to comment
saarg Posted March 21, 2016 Share Posted March 21, 2016 Fixed it. libvirt.img cannot be anywhere other than /mnt/cache/libvirt.img even if you put it in a folder that /is/ the cache drive. It must specifically be that exact path. Once I make it /mnt/cache/libvirt.img the status changes. Well mine is at /mnt/user/system/libvirt/libvirt.img which is where the upgrade process put it and that works fine for me. Since the 'system' share is set as cache only that is a the same as /mnt/cache/system/libvirt/libvirt.img /mnt/user/Virtual Machines/libvirt.img is also cache only and didn't work for me so it's strange you had better luck than me. At least future users upgrading can look into this thread in case they run into similar and use what we've both experienced. It is probably the space in the folder name that was the fault. I guess you only tried with a folder that contained a space? If that is the case you should post it in the beta thread so limetech is aware of the bug. Quote Link to comment
evocraigst Posted June 2, 2016 Share Posted June 2, 2016 i have no system or cache aor etc folders anywhere Quote Link to comment
RobJ Posted September 22, 2016 Share Posted September 22, 2016 itimpi or others, should some advice from this thread be put into the Additional Upgrade Advice? If so, how should it be worded? (I haven't created a VM yet) Quote Link to comment
krone6 Posted September 22, 2016 Author Share Posted September 22, 2016 itimpi or others, should some advice from this thread be put into the Additional Upgrade Advice? If so, how should it be worded? (I haven't created a VM yet) Thanks for the link. I'll save it and reference it in the future. Quote Link to comment
zzgus Posted September 22, 2016 Share Posted September 22, 2016 Can someone help me with a problem similar to that. I can access to VM (and one vm is up and running) but I CAN'T do anything. I can't STOP, SHUTDOWN, EDIT XML, etc... I simply does nothing when I click on the VM icon. I was on 6.1.9 after changing some parameters. Update to 6.1.2 without luck, the problem persists. Here you have images and explanation: http://lime-technology.com/forum/index.php?topic=52100.0 Thankyou Gus Quote Link to comment
krone6 Posted September 22, 2016 Author Share Posted September 22, 2016 Can someone help me with a problem similar to that. I can access to VM (and one vm is up and running) but I CAN'T do anything. I can't STOP, SHUTDOWN, EDIT XML, etc... I simply does nothing when I click on the VM icon. I was on 6.1.9 after changing some parameters. Update to 6.1.2 without luck, the problem persists. Here you have images and explanation: http://lime-technology.com/forum/index.php?topic=52100.0 Thankyou Gus Please create your own thread since this one has been solved. Quote Link to comment
zzgus Posted September 22, 2016 Share Posted September 22, 2016 Please create your own thread since this one has been solved. Sorry @krone6 I did it, but thought it was similar to this one and perhaps someone could give me a clue. I didn't find any thread similar to my problem and haven't had any answer to my "particular" problem. 2 days without been able to use VMs. Thankyou Gus Quote Link to comment
CouchCoach Posted October 10, 2016 Share Posted October 10, 2016 ... Please create your own thread since this one has been solved. I am sorry, but was the resolution to choose a cache drive? Because i upgraded to 6.2.1 and can`t use VMs anymore as well. And i don`t have a cache drive. So do i need to buy a new drive just for my VMs? Quote Link to comment
krone6 Posted October 10, 2016 Author Share Posted October 10, 2016 itimpi or others, should some advice from this thread be put into the Additional Upgrade Advice? If so, how should it be worded? (I haven't created a VM yet) Thanks for the link. I'll save it and reference it in the future. I forgot and for some reason didn't update my original post with the resolution. Since then I've upgraded to each new release as it gets updated so whatever the latest version is is the one I'm on now and the VMs work fine, though they're still super picky sometimes. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.