March 20, 201610 yr Am trying to set up Plex Docker on my unRAID 6 server (ver 6.1.9) Am following the blogs (thanks to all) and everything is fine until I get to the templates step. I have added and saved templates (including https://github.com/limetech/docker-templates) but when I select 'Add Container' the 'Template - select a template' menu gives me 'user defined template' or 'default template' non interactive selection? Neither of then are selectable? I have established /mnt/disk1/docker.img (32.2GB) and /mnt/disk1/appdata (empty)
March 20, 201610 yr Community Expert Am trying to set up Plex Docker on my unRAID 6 server (ver 6.1.9) Am following the blogs (thanks to all) and everything is fine until I get to the templates step. I have added and saved templates (including https://github.com/limetech/docker-templates) but when I select 'Add Container' the 'Template - select a template' menu gives me 'user defined template' or 'default template' non interactive selection? Neither of then are selectable? I have established /mnt/disk1/docker.img (32.2GB) and /mnt/disk1/appdata (empty) Install Community Applications plugin.
March 20, 201610 yr Am trying to set up Plex Docker on my unRAID 6 server (ver 6.1.9) Am following the blogs (thanks to all) and everything is fine until I get to the templates step. I have added and saved templates (including https://github.com/limetech/docker-templates) but when I select 'Add Container' the 'Template - select a template' menu gives me 'user defined template' or 'default template' non interactive selection? Neither of then are selectable? I have established /mnt/disk1/docker.img (32.2GB) and /mnt/disk1/appdata (empty) Install Community Applications plugin. By far the easiest solution is ^^^^, but without it I *believe* that you'd also have to check for updates, and if nothing is still populated, then probably you'd have to set DNS addresses in network settings of 8.8.8.8 and 8.8.4.4 But, its been forever for myself and much of the community here since we've used anything other than CA to handle everything for us.
March 21, 201610 yr Author This is what I get when trying to load CA plugin: installing: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg plugin: downloading https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg plugin: downloading: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg ... failed (Network failure) plugin: wget: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg download failure (Network failure)
March 21, 201610 yr Community Expert Probably a DNS issue. Can you ping raw.githubusercontent.com from your server?
March 23, 201610 yr Author Thanks Trurl, good point. No success on the ping. IFCONFIG gives me normal (static) IP info for eth0 but the ping gives 'network unreachable'. I will check modem and cabling but have been using server only on cabled home network amongst 3 computers for some months without issue. Server still working fine. Network issue only identified when i tried to load a Docker template - PLEX. I have found more recent realtek driver for my r8169 network card as tar.bz2 file but can't remember wget commands - could you direct me to these commands please. And can I wget if I am not on the network? or will it be a usb stick exercise? Mother board is Gigabyte F2A55M-HD2 with AMD A4 5300 Appreciate the assistance, teeds
Archived
This topic is now archived and is closed to further replies.