[Support] binhex - rTorrentVPN

Spies · January 13, 2019

Maybe check the contents of that file after you set it in the UI, if it's not updating maybe it's a permission issue, you could try deleting the .dat file and it may create a new one.

theGrok · January 13, 2019

6 minutes ago, Spies said:

Maybe check the contents of that file after you set it in the UI, if it's not updating maybe it's a permission issue, you could try deleting the .dat file and it may create a new one.

it does not seem to change the files when I make changes to the ui.

Spies · January 13, 2019

So it must be getting overwritten when the docker starts up, do the logs give any ideas?

theGrok · January 13, 2019

5 minutes ago, Spies said:

So it must be getting overwritten when the docker starts up, do the logs give any ideas?

I am not sure which log I should be looking at, nor where it is stored, to be honest

Spies · January 13, 2019

Click the rtorrent docker, then logs.

theGrok · January 13, 2019

35 minutes ago, Spies said:

Click the rtorrent docker, then logs.

nothing strange there that I can see

theGrok · January 13, 2019

Well, I figured it out. I took a closer look at the ratio.dat file and it does in fact save my changes. I even restarted the container and it the changes were maintained. I reported that it did not save incorrectly above.

I loaded ruTorrent ui with another browser and lo and behold, the ratio groups were there with my changes. When i went into my original browser (firefox) it did not have the changes. I reloaded the page without cage and it worked. So this appears perhaps to have been a browser cache issue more than anything.

apologies for the confusion.

DazedAndConfused · January 14, 2019

I'm trying to log into Flood to get to rtorrent and its saying "network error" when I put my creds in. Ive been using this docker forever, so this is a bit odd to me. What does it mean?

binhex · January 14, 2019

4 hours ago, DazedAndConfused said:

I'm trying to log into Flood to get to rtorrent and its saying "network error" when I put my creds in. Ive been using this docker forever, so this is a bit odd to me. What does it mean?

i was force to switch from the only github release of flood to latest commit from the master branch, thus there were a lot of changes, not all of which look to be compatible with the configuration generated for the release, so in short if you wish to continue using flood then you will need to delete the old config and allow flood to re-create the configuration and then obviously re-configure again, its a bit shit i know but there is literally nothing i can do about it.

Atr3id3s · January 14, 2019

11 hours ago, DazedAndConfused said:

I'm trying to log into Flood to get to rtorrent and its saying "network error" when I put my creds in. Ive been using this docker forever, so this is a bit odd to me. What does it mean?

I had the same problem, was able to fix it by deleting users.db in the flood config and restarting the container. It asked for new connection credentials and the method of connecting to the instance.

DazedAndConfused · January 14, 2019

Thanks for the help guys. I was able to get the connection screen but Im not sure what information to put in because it says it cant find rtorrent. Ive tried all of the ports that are mapped to the docker, 9080, 9440, 5000, 8118..

What information do I need to put in here? Its been so long since Ive had to set flood up, I honestly cant remember.

Atr3id3s · January 14, 2019

You're pointing Flood at Rtorrent, so you'll use 127.0.0.1/5000 as the IP/port, or you'd have to point it directly at the .sock file... I think.

DazedAndConfused · January 14, 2019

That was it! I did "localhost:5000" and it found it right away. Thanks!

DavidAUK · January 15, 2019

This looks like a great Docker image but I'm failing to get out the blocks. It just stalls.

Created by...
___.   .__       .__                   
\_ |__ |__| ____ |  |__   ____ ___  ___
 | __ \|  |/    \|  |  \_/ __ \\  \/  /
 | \_\ \  |   |  \   Y  \  ___/ >    < 
 |___  /__|___|  /___|  /\___  >__/\_ \
     \/        \/     \/     \/      \/
   https://hub.docker.com/u/binhex/

2019-01-14 23:44:24.200725 [info] System information Linux binhex-arch-rtorrentvpn1 3.10.105 #23824 SMP Fri Sep 7 12:50:13 CST 2018 x86_64 GNU/Linux
2019-01-14 23:44:24.816080 [info] PUID defined as '1024'
2019-01-14 23:44:25.132310 [info] PGID defined as '100'
2019-01-14 23:44:26.339623 [info] UMASK defined as '000'
2019-01-14 23:44:26.768699 [info] Permissions already set for volume mappings
2019-01-14 23:44:27.098878 [info] VPN_ENABLED defined as 'yes'
2019-01-14 23:44:27.657239 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/77.ovpn
dos2unix: converting file /config/openvpn/77.ovpn to Unix format...
2019-01-14 23:44:28.010300 [info] VPN remote line defined as 'remote swiss.torguardvpnaccess.com 1912'
2019-01-14 23:44:28.192683 [info] VPN_REMOTE defined as 'swiss.torguardvpnaccess.com'
2019-01-14 23:44:28.377245 [info] VPN_PORT defined as '1912'
2019-01-14 23:44:28.678844 [info] VPN_PROTOCOL defined as 'udp'
2019-01-14 23:44:28.868962 [info] VPN_DEVICE_TYPE defined as 'tun0'
2019-01-14 23:44:29.050646 [info] VPN_PROV defined as 'custom'
2019-01-14 23:44:29.241862 [info] LAN_NETWORK defined as '192.168.86.0/24'
2019-01-14 23:44:29.436868 [info] NAME_SERVERS defined as '104.223.91.210,104.223.91.194,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4'
2019-01-14 23:44:29.649568 [info] VPN_USER defined as 'redacted'
2019-01-14 23:44:29.837553 [info] VPN_PASS defined as 'redacted'
2019-01-14 23:44:30.020958 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2019-01-14 23:44:30.208043 [info] ENABLE_PRIVOXY defined as 'yes'
2019-01-14 23:44:30.402574 [info] ENABLE_FLOOD defined as 'yes'
2019-01-14 23:44:30.582967 [info] ENABLE_AUTODL_IRSSI defined as 'yes'

Using Synology and Torguard. I've got several other apps running in Docker ok, including rtorrent, rutorrent and Flood (currently switched off). This is my first with a VPN.

Anyone know why it might be stalling at this point?

Edited January 15, 2019 by DavidAUK

binhex · January 15, 2019

17 hours ago, DavidAUK said:

This looks like a great Docker image but I'm failing to get out the blocks. It just stalls.


Created by...
___.   .__       .__                   
\_ |__ |__| ____ |  |__   ____ ___  ___
 | __ \|  |/    \|  |  \_/ __ \\  \/  /
 | \_\ \  |   |  \   Y  \  ___/ >    < 
 |___  /__|___|  /___|  /\___  >__/\_ \
     \/        \/     \/     \/      \/
   https://hub.docker.com/u/binhex/

2019-01-14 23:44:24.200725 [info] System information Linux binhex-arch-rtorrentvpn1 3.10.105 #23824 SMP Fri Sep 7 12:50:13 CST 2018 x86_64 GNU/Linux
2019-01-14 23:44:24.816080 [info] PUID defined as '1024'
2019-01-14 23:44:25.132310 [info] PGID defined as '100'
2019-01-14 23:44:26.339623 [info] UMASK defined as '000'
2019-01-14 23:44:26.768699 [info] Permissions already set for volume mappings
2019-01-14 23:44:27.098878 [info] VPN_ENABLED defined as 'yes'
2019-01-14 23:44:27.657239 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/77.ovpn
dos2unix: converting file /config/openvpn/77.ovpn to Unix format...
2019-01-14 23:44:28.010300 [info] VPN remote line defined as 'remote swiss.torguardvpnaccess.com 1912'
2019-01-14 23:44:28.192683 [info] VPN_REMOTE defined as 'swiss.torguardvpnaccess.com'
2019-01-14 23:44:28.377245 [info] VPN_PORT defined as '1912'
2019-01-14 23:44:28.678844 [info] VPN_PROTOCOL defined as 'udp'
2019-01-14 23:44:28.868962 [info] VPN_DEVICE_TYPE defined as 'tun0'
2019-01-14 23:44:29.050646 [info] VPN_PROV defined as 'custom'
2019-01-14 23:44:29.241862 [info] LAN_NETWORK defined as '192.168.86.0/24'
2019-01-14 23:44:29.436868 [info] NAME_SERVERS defined as '104.223.91.210,104.223.91.194,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4'
2019-01-14 23:44:29.649568 [info] VPN_USER defined as 'redacted'
2019-01-14 23:44:29.837553 [info] VPN_PASS defined as 'redacted'
2019-01-14 23:44:30.020958 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2019-01-14 23:44:30.208043 [info] ENABLE_PRIVOXY defined as 'yes'
2019-01-14 23:44:30.402574 [info] ENABLE_FLOOD defined as 'yes'
2019-01-14 23:44:30.582967 [info] ENABLE_AUTODL_IRSSI defined as 'yes'

Using Synology and Torguard. I've got several other apps running in Docker ok, including rtorrent, rutorrent and Flood (currently switched off). This is my first with a VPN.

Anyone know why it might be stalling at this point?

not with the above, nope, you need to supply a full log, follow the procedure in the link below:-

https://forums.unraid.net/topic/44108-support-binhex-general/?do=findComment&comment=435831

DavidAUK · January 15, 2019

Thank you. Tip left!

STOP PRESS. Something just happened. Let me dig into it.

Edited January 15, 2019 by DavidAUK

marshy919 · January 16, 2019

root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='binhex-rtorrentvpn' --net='bridge' --privileged=true -e TZ="Australia/Adelaide" -e HOST_OS="Unraid" -e 'VPN_ENABLED'='no' -e 'VPN_USER'='vpn username' -e 'VPN_PASS'='vpn password' -e 'VPN_PROV'='pia' -e 'VPN_OPTIONS'='' -e 'STRICT_PORT_FORWARD'='yes' -e 'ENABLE_PRIVOXY'='no' -e 'ENABLE_FLOOD'='yes' -e 'ENABLE_AUTODL_IRSSI'='no' -e 'LAN_NETWORK'='192.168.1.0/24' -e 'NAME_SERVERS'='1.1.1.1,1.0.0.1' -e 'DEBUG'='false' -e 'PHP_TZ'='UTC' -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -p '3000:3000/tcp' -p '5000:5000/tcp' -p '9080:9080/tcp' -p '9443:9443/tcp' -p '8118:8118/tcp' -v '/mnt/user/appdata/data':'/data':'rw' -v '/mnt/user/appdata/binhex-rtorrentvpn':'/config':'rw' 'binhex/arch-rtorrentvpn' 
474b2951bece2629e7cc2d048191e08cae0b9d7a77bb04cbb2e704d1e25f14bd

The command finished successfully!

Command to install the docker, with flood enabled, VPN access disabled.

2019-01-16 23:21:50.560295 [info] System information Linux 474b2951bece 4.18.20-unRAID #1 SMP Fri Nov 23 11:38:16 PST 2018 x86_64 GNU/Linux
2019-01-16 23:21:50.589332 [info] PUID defined as '99'
2019-01-16 23:21:51.394718 [info] PGID defined as '100'
2019-01-16 23:21:51.780465 [info] UMASK defined as '000'
2019-01-16 23:21:51.806759 [info] Permissions already set for volume mappings
2019-01-16 23:21:51.837628 [info] VPN_ENABLED defined as 'no'
2019-01-16 23:21:51.860054 [warn] !!IMPORTANT!! VPN IS SET TO DISABLED', YOU WILL NOT BE SECURE
2019-01-16 23:21:51.888906 [info] ENABLE_FLOOD defined as 'yes'
2019-01-16 23:21:51.919305 [info] ENABLE_AUTODL_IRSSI defined as 'no'
2019-01-16 23:21:52.624329 [info] Starting Supervisor...
2019-01-16 23:21:53,014 INFO Included extra file "/etc/supervisor/conf.d/rtorrent.conf" during parsing
2019-01-16 23:21:53,014 INFO Set uid to user 0 succeeded
2019-01-16 23:21:53,017 INFO supervisord started with pid 8
2019-01-16 23:21:54,019 INFO spawned: 'start-script' with pid 68
2019-01-16 23:21:54,022 INFO spawned: 'rutorrent-script' with pid 69
2019-01-16 23:21:54,024 INFO spawned: 'flood-script' with pid 70
2019-01-16 23:21:54,026 INFO spawned: 'irssi-script' with pid 71
2019-01-16 23:21:54,029 INFO spawned: 'watchdog-script' with pid 72
2019-01-16 23:21:54,032 INFO spawned: 'privoxy-script' with pid 73
2019-01-16 23:21:54,032 INFO reaped unknown pid 9
2019-01-16 23:21:54,035 DEBG 'start-script' stdout output:
[info] VPN not enabled, skipping configuration of VPN

2019-01-16 23:21:54,036 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-16 23:21:54,036 INFO success: rutorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-16 23:21:54,036 INFO success: flood-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-16 23:21:54,037 INFO success: irssi-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-16 23:21:54,037 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-16 23:21:54,037 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-16 23:21:54,037 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 22950195615360 for <Subprocess at 22950195615144 with name start-script in state RUNNING> (stdout)>
2019-01-16 23:21:54,038 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 22950195615648 for <Subprocess at 22950195615144 with name start-script in state RUNNING> (stderr)>
2019-01-16 23:21:54,038 INFO exited: start-script (exit status 0; expected)
2019-01-16 23:21:54,038 DEBG fd 16 closed, stopped monitoring <POutputDispatcher at 22950195616224 for <Subprocess at 22950195615000 with name rutorrent-script in state RUNNING> (stderr)>
2019-01-16 23:21:54,038 DEBG 'rutorrent-script' stdout output:
[info] Flood enabled, preventing ruTorrent Web UI from starting...

2019-01-16 23:21:54,039 INFO exited: rutorrent-script (exit status 0; expected)
2019-01-16 23:21:54,039 DEBG fd 26 closed, stopped monitoring <POutputDispatcher at 22950195617376 for <Subprocess at 22950195614712 with name irssi-script in state RUNNING> (stderr)>
2019-01-16 23:21:54,039 DEBG 'irssi-script' stdout output:
[info] Autodl-irssi not enabled, skipping startup

2019-01-16 23:21:54,039 INFO exited: irssi-script (exit status 0; expected)
2019-01-16 23:21:54,040 DEBG 'privoxy-script' stdout output:
[info] Privoxy set to disabled

2019-01-16 23:21:54,040 DEBG fd 36 closed, stopped monitoring <POutputDispatcher at 22950195688584 for <Subprocess at 22950195614856 with name privoxy-script in state RUNNING> (stderr)>
2019-01-16 23:21:54,041 INFO exited: privoxy-script (exit status 0; expected)
2019-01-16 23:21:54,041 DEBG received SIGCLD indicating a child quit
2019-01-16 23:21:54,041 DEBG 'flood-script' stdout output:
[info] Flood enabled
[info] Waiting for rTorrent process to start listening on port 5000...

2019-01-16 23:21:54,042 DEBG 'watchdog-script' stdout output:
[info] rTorrent config file already exists, skipping copy

2019-01-16 23:21:54,059 DEBG 'watchdog-script' stderr output:
dos2unix: converting file /config/rtorrent/config/rtorrent.rc to Unix format...

2019-01-16 23:21:54,104 DEBG 'watchdog-script' stdout output:
[info] rTorrent not running

2019-01-16 23:21:54,104 DEBG 'watchdog-script' stdout output:
[info] Removing any rTorrent session lock files left over from the previous run...

2019-01-16 23:21:54,106 DEBG 'watchdog-script' stdout output:
[info] Attempting to start rTorrent...

2019-01-16 23:21:54,109 DEBG 'watchdog-script' stdout output:
Script started, file is /home/nobody/typescript

2019-01-16 23:21:54,173 DEBG 'watchdog-script' stdout output:
Script done, file is /home/nobody/typescript

2019-01-16 23:21:54,479 DEBG 'flood-script' stdout output:
[info] Configuring Flood...

2019-01-16 23:21:54,479 DEBG 'flood-script' stdout output:
[info] Copying Flood config file /config/flood/config/config.js back to container...

2019-01-16 23:21:54,483 DEBG 'flood-script' stdout output:
[info] Starting Flood...

2019-01-16 23:21:55,183 DEBG 'watchdog-script' stdout output:
[info] rTorrent process started

2019-01-16 23:21:55,184 DEBG 'watchdog-script' stdout output:
[info] Waiting for rTorrent process to start listening on port 5000...

2019-01-16 23:21:55,194 DEBG 'watchdog-script' stdout output:
[info] rTorrent process listening

2019-01-16 23:21:55,197 DEBG 'watchdog-script' stdout output:
[info] Autodl-irssi not enabled, skipping startup

2019-01-16 23:21:55,198 DEBG 'watchdog-script' stdout output:
[info] Flood enabled, disabling initialisation of ruTorrent plugins...

2019-01-16 23:21:55,198 DEBG 'watchdog-script' stdout output:
[info] Nginx log file does not exist, skipping log rotation

2019-01-16 23:22:31,740 DEBG 'watchdog-script' stdout output:
[info] Nginx log file does not exist, skipping log rotation

2019-01-16 23:23:01,748 DEBG 'watchdog-script' stdout output:
[info] Nginx log file does not exist, skipping log rotation

2019-01-16 23:23:31,757 DEBG 'watchdog-script' stdout output:
[info] Nginx log file does not exist, skipping log rotation

2019-01-16 23:24:01,768 DEBG 'watchdog-script' stdout output:
[info] Nginx log file does not exist, skipping log rotation

2019-01-16 23:24:31,777 DEBG 'watchdog-script' stdout output:
[info] Nginx log file does not exist, skipping log rotation

2019-01-16 23:25:01,786 DEBG 'watchdog-script' stdout output:
[info] Nginx log file does not exist, skipping log rotation

2019-01-16 23:25:31,795 DEBG 'watchdog-script' stdout output:
[info] Nginx log file does not exist, skipping log rotation

2019-01-16 23:26:01,800 DEBG 'watchdog-script' stdout output:
[info] Nginx log file does not exist, skipping log rotation

2019-01-16 23:26:31,810 DEBG 'watchdog-script' stdout output:
[info] Nginx log file does not exist, skipping log rotation

First time attempting flood install, I feel like I'm missing a step...

binhex · January 16, 2019

46 minutes ago, marshy919 said:

First time attempting flood install, I feel like I'm missing a step...

why do you say that? looks like a successful start to me, what exactly is the issue?

marshy919 · January 16, 2019

Just now, binhex said:

why do you say that? looks like a successful start to me, what exactly is the issue?

Accessing the WebUI is just blank.

http://192.168.1.111:9080/

Is there a different port for Flood?

Edit: answered my own question.

Yes, its 3000

Edit 2:

FYI, rTorrent port in the next step is 5000.

Edited January 16, 2019 by marshy919

zbaylin · January 17, 2019

Hi binhex -- I had been running Flood with rtorrent for a while, and recently decided that I wanted to enable both. Once, I did however, I got the infamous

[info] Waiting for rTorrent process to start listening on port 5000...

error. I have tried deleting rtorrent.rc, and all other steps you have mentioned before. I was wondering if you had any other suggestions. Here is my log with DEBUG enabled.

ErrorWarningSystemArrayLogin


Created by...
___. .__ .__ 
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > < 
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2019-01-17 17:23:15.122442 [info] System information Linux 67c1afbf08d6 4.1.18-unRAID #1 SMP PREEMPT Thu Mar 3 13:08:41 PST 2016 x86_64 GNU/Linux
2019-01-17 17:23:15.165519 [info] PUID defined as '99'
2019-01-17 17:23:15.769703 [info] PGID defined as '100'
2019-01-17 17:23:16.180819 [info] UMASK defined as '000'
2019-01-17 17:23:16.218168 [info] Permissions already set for volume mappings
2019-01-17 17:23:16.262666 [info] VPN_ENABLED defined as 'no'
2019-01-17 17:23:16.294925 [warn] !!IMPORTANT!! VPN IS SET TO DISABLED', YOU WILL NOT BE SECURE
2019-01-17 17:23:16.333849 [info] ENABLE_FLOOD defined as 'yes'
2019-01-17 17:23:16.370237 [info] ENABLE_AUTODL_IRSSI defined as 'no'
2019-01-17 17:23:18.461231 [info] Starting Supervisor...
2019-01-17 17:23:19,229 INFO Included extra file "/etc/supervisor/conf.d/rtorrent.conf" during parsing
2019-01-17 17:23:19,229 INFO Set uid to user 0 succeeded
2019-01-17 17:23:19,242 INFO supervisord started with pid 5
2019-01-17 17:23:20,246 INFO spawned: 'start-script' with pid 65
2019-01-17 17:23:20,249 INFO spawned: 'rutorrent-script' with pid 66
2019-01-17 17:23:20,252 INFO spawned: 'flood-script' with pid 67
2019-01-17 17:23:20,258 INFO spawned: 'irssi-script' with pid 68
2019-01-17 17:23:20,263 INFO spawned: 'watchdog-script' with pid 69
2019-01-17 17:23:20,270 INFO spawned: 'privoxy-script' with pid 70
2019-01-17 17:23:20,275 INFO reaped unknown pid 6
2019-01-17 17:23:20,275 DEBG 'start-script' stdout output:
[info] VPN not enabled, skipping configuration of VPN

2019-01-17 17:23:20,276 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 47048925255512 for <Subprocess at 47048925255008 with name start-script in state STARTING> (stderr)>
2019-01-17 17:23:20,276 INFO exited: start-script (exit status 0; expected)
2019-01-17 17:23:20,276 DEBG received SIGCLD indicating a child quit
2019-01-17 17:23:20,277 DEBG 'flood-script' stdout output:
[info] Flood enabled
[info] Waiting for rTorrent process to start listening on port 5000...

2019-01-17 17:23:20,277 INFO success: rutorrent-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-17 17:23:20,277 INFO success: flood-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-17 17:23:20,277 INFO success: irssi-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-17 17:23:20,277 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-17 17:23:20,277 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2019-01-17 17:23:20,282 DEBG 'rutorrent-script' stdout output:
[info] Flood enabled, preventing ruTorrent Web UI from starting...

2019-01-17 17:23:20,286 DEBG 'irssi-script' stdout output:
[info] Autodl-irssi not enabled, skipping startup

2019-01-17 17:23:20,287 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 47048925255800 for <Subprocess at 47048925254864 with name rutorrent-script in state RUNNING> (stdout)>
2019-01-17 17:23:20,287 DEBG fd 22 closed, stopped monitoring <POutputDispatcher at 47048925256952 for <Subprocess at 47048925254576 with name irssi-script in state RUNNING> (stdout)>
2019-01-17 17:23:20,287 DEBG fd 26 closed, stopped monitoring <POutputDispatcher at 47048925257240 for <Subprocess at 47048925254576 with name irssi-script in state RUNNING> (stderr)>
2019-01-17 17:23:20,287 INFO exited: irssi-script (exit status 0; expected)
2019-01-17 17:23:20,288 DEBG received SIGCLD indicating a child quit
2019-01-17 17:23:20,288 DEBG fd 16 closed, stopped monitoring <POutputDispatcher at 47048925256088 for <Subprocess at 47048925254864 with name rutorrent-script in state RUNNING> (stderr)>
2019-01-17 17:23:20,288 INFO exited: rutorrent-script (exit status 0; expected)
2019-01-17 17:23:20,288 DEBG received SIGCLD indicating a child quit
2019-01-17 17:23:20,291 DEBG 'watchdog-script' stdout output:
[info] rTorrent config file already exists, skipping copy

2019-01-17 17:23:20,293 DEBG 'privoxy-script' stdout output:
[info] Privoxy set to disabled

2019-01-17 17:23:20,295 DEBG fd 32 closed, stopped monitoring <POutputDispatcher at 47048925323920 for <Subprocess at 47048925254720 with name privoxy-script in state RUNNING> (stdout)>
2019-01-17 17:23:20,295 DEBG fd 36 closed, stopped monitoring <POutputDispatcher at 47048925324352 for <Subprocess at 47048925254720 with name privoxy-script in state RUNNING> (stderr)>
2019-01-17 17:23:20,295 INFO exited: privoxy-script (exit status 0; expected)
2019-01-17 17:23:20,295 DEBG received SIGCLD indicating a child quit
2019-01-17 17:23:20,320 DEBG 'watchdog-script' stderr output:
dos2unix: converting file /config/rtorrent/config/rtorrent.rc to Unix format...

2019-01-17 17:23:20,333 DEBG 'watchdog-script' stdout output:
[info] rTorrent not running
[info] Removing any rTorrent session lock files left over from the previous run...

2019-01-17 17:23:20,335 DEBG 'watchdog-script' stdout output:
[info] Attempting to start rTorrent...

2019-01-17 17:23:20,337 DEBG 'watchdog-script' stdout output:
Script started, file is /home/nobody/typescript

2019-01-17 17:23:20,389 DEBG 'watchdog-script' stdout output:
Script done, file is /home/nobody/typescript

2019-01-17 17:23:20,400 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:21,406 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:22,412 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:23,419 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:24,432 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:25,441 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:26,450 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:27,460 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:28,467 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:29,474 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:30,483 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:31,492 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:32,500 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:33,511 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:34,521 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:35,530 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:36,540 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:37,552 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:38,565 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:39,572 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:40,580 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:41,589 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:42,601 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:43,608 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:44,616 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:20,291 DEBG 'watchdog-script' stdout output:
[info] rTorrent config file already exists, skipping copy

2019-01-17 17:23:20,293 DEBG 'privoxy-script' stdout output:
[info] Privoxy set to disabled

2019-01-17 17:23:20,295 DEBG fd 32 closed, stopped monitoring <POutputDispatcher at 47048925323920 for <Subprocess at 47048925254720 with name privoxy-script in state RUNNING> (stdout)>
2019-01-17 17:23:20,295 DEBG fd 36 closed, stopped monitoring <POutputDispatcher at 47048925324352 for <Subprocess at 47048925254720 with name privoxy-script in state RUNNING> (stderr)>
2019-01-17 17:23:20,295 INFO exited: privoxy-script (exit status 0; expected)
2019-01-17 17:23:20,295 DEBG received SIGCLD indicating a child quit
2019-01-17 17:23:20,320 DEBG 'watchdog-script' stderr output:
dos2unix: converting file /config/rtorrent/config/rtorrent.rc to Unix format...

2019-01-17 17:23:20,333 DEBG 'watchdog-script' stdout output:
[info] rTorrent not running
[info] Removing any rTorrent session lock files left over from the previous run...

2019-01-17 17:23:20,335 DEBG 'watchdog-script' stdout output:
[info] Attempting to start rTorrent...

2019-01-17 17:23:20,337 DEBG 'watchdog-script' stdout output:
Script started, file is /home/nobody/typescript

2019-01-17 17:23:20,389 DEBG 'watchdog-script' stdout output:
Script done, file is /home/nobody/typescript

2019-01-17 17:23:20,400 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:21,406 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:22,412 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:23,419 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:24,432 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:25,441 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:26,450 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:27,460 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:28,467 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:29,474 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:30,483 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:31,492 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:32,500 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:33,511 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:34,521 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:35,530 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:36,540 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:37,552 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:38,565 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:39,572 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:40,580 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:41,589 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:42,601 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:43,608 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:44,616 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:45,630 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:46,639 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:47,651 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:48,658 DEBG 'watchdog-script' stdout output:
[debug] Waiting for rTorrent process to start...

2019-01-17 17:23:49,671 DEBG 'watchdog-script' stdout output:
[warn] Wait for rTorrent process to start aborted

2019-01-17 17:23:49,671 DEBG 'watchdog-script' stdout output:
[info] Waiting for rTorrent process to start listening on port 5000...

Thanks in advance!

Spies · January 18, 2019

Mine has stopped downloading or uploading anything this morning, when logging in everything looks fine and I can interact with the webui until I try to delete something and the docker crashes and restarts.

Is there a memory issue? I currently have 200 torrents in there.

binhex · January 18, 2019

44 minutes ago, Spies said:

Is there a memory issue? I currently have 200 torrents in there.

you might have dodgy memory on your host, try running memtest for 24 hours, if you see ANY errors then thats your issue.

Spies · January 18, 2019

5 minutes ago, binhex said:

you might have dodgy memory on your host, try running memtest for 24 hours, if you see ANY errors then thats your issue.

I'm running ECC memory.

Restoring the sessions folder to the one from the previous docker has allowed everything to work again.

I'll see what happens when I reach 200 again.

Edited January 18, 2019 by Spies

binhex · January 18, 2019

6 minutes ago, Spies said:

I'm running ECC memory.

just cos its ECC doesn't mean it cant go bad, excellent that you got it running again, but you gotta ask the question, why did the sessions file get corrupted, and bad ram is one of those causes.

Spies · January 18, 2019

Would I not see corruption elsewhere?

I can't easily take the server down for 24 hours whilst I run a memtest.

I use these advanced settings, I don't know if they may be detrimental to rtorrent in a docker environment?

# Advanced Settings

pieces.memory.max.set = 2048M

network.http.max_open.set = 99

trackers.numwant.set = 100

network.receive_buffer.size.set = 4M

network.send_buffer.size.set = 12M

pieces.preload.type.set = 2

pieces.preload.min_size.set = 262144

pieces.preload.min_rate.set = 5120

Edited January 18, 2019 by Spies

[Support] binhex - rTorrentVPN

Recommended Posts

Link to comment

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

binhex

Beta

binhex

Posted Images

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment