saarg Posted March 3, 2018 Share Posted March 3, 2018 19 hours ago, DZMM said: yes - i temporarily installed the dvblink docker and it saw the cards ok. I will try a reboot when the family are eating dinner though to see what happens Do a chmod -R 777 /dev/dvb and your tuners should appear again. Link to comment
CHBMB Posted March 6, 2018 Share Posted March 6, 2018 v6.5.0rc5 uploaded a couple of hours ago.Sent from my LG-H815 using Tapatalk 2 Link to comment
CHBMB Posted March 6, 2018 Share Posted March 6, 2018 Had a look on the Digital Devices website (via google translate) Quote Linux driver Supported products: Cine series DuoFlex series Octopus series MAX series Flex-CI modules Please note: As of kernel 4.14 , the drivers for almost all of our cards are included in the kernel and do not require further driver installation. Cards not yet included in the kernel : Resi modulation cards Given this I'm going to officially drop the dedicated Digital Devices build. Users should switch to LibreELEC build instead. 1 Link to comment
CHBMB Posted March 10, 2018 Share Posted March 10, 2018 v6.5.0rc6 uploadedSent from my LG-H815 using Tapatalk 2 Link to comment
DMcK Posted March 10, 2018 Share Posted March 10, 2018 v6.5.0rc6 uploadedSent from my LG-H815 using TapatalkAs mentioned above, I had to add chmod -R 777 /dev/dvb to my go file for these v6.5rcX builds for the tuner to appear in tvh. I didn't need that previously.It might be worth a mention in the first post or release notes/change log when v6.5 final comes out. Link to comment
CHBMB Posted March 10, 2018 Share Posted March 10, 2018 2 hours ago, DMcK said: As mentioned above, I had to add chmod -R 777 /dev/dvb to my go file for these v6.5rcX builds for the tuner to appear in tvh. I didn't need that previously. It might be worth a mention in the first post or release notes/change log when v6.5 final comes out. Yeah, we're looking into why that's happened. Nothing has changed in the plugin or the DVB builds, we're not sure yet if it's a Linux kernel thing or a docker thing. Link to comment
saarg Posted March 10, 2018 Share Posted March 10, 2018 2 minutes ago, CHBMB said: Yeah, we're looking into why that's happened. Nothing has changed in the plugin or the DVB builds, we're not sure yet if it's a Linux kernel thing or a docker thing. I will do some testing tomorrow to see if I can find anything useful. Link to comment
CHBMB Posted March 11, 2018 Share Posted March 11, 2018 I will do some testing tomorrow to see if I can find anything useful.May need to update the plugin...Sent from my LG-H815 using Tapatalk Link to comment
DMcK Posted March 11, 2018 Share Posted March 11, 2018 I will do some testing tomorrow to see if I can find anything useful.Thanks to both you and CHBMB. Link to comment
CHBMB Posted March 12, 2018 Share Posted March 12, 2018 @DZMM @DMcK Plugin has been updated to mean it should work with v6.5.0 now, without the need for any command line or go file jiggery-pokery If one of you could be kind enough to confirm that would be awesome. Link to comment
DMcK Posted March 13, 2018 Share Posted March 13, 2018 [mention=70898]DZMM[/mention] [mention=59374]DMcK[/mention] Plugin has been updated to mean it should work with v6.5.0 now, without the need for any command line or go file jiggery-pokery If one of you could be kind enough to confirm that would be awesome.Updated the plugin, removed the line from my go file, rebooted and it works. Thanks! Link to comment
CHBMB Posted March 13, 2018 Share Posted March 13, 2018 Updated the plugin, removed the line from my go file, rebooted and it works. Thanks!Thanks for testing.Sent from my LG-H815 using Tapatalk Link to comment
DZMM Posted March 13, 2018 Share Posted March 13, 2018 5 hours ago, DMcK said: Updated the plugin, removed the line from my go file, rebooted and it works. Thanks! What drivers/card are you using? TBS OS version didn't work for me - I tried twice downloading direct from the download site and then via the plugin. Both times I had shutdown problems during the update - I had to force shutdown (press and hold power) to get my machine to stop. This hasn't happened for a while since I followed this advice Link to comment
DMcK Posted March 13, 2018 Share Posted March 13, 2018 What drivers/card are you using?LibreELEC with a USB hauppauge 950q tuner. Link to comment
DZMM Posted March 13, 2018 Share Posted March 13, 2018 1 hour ago, DMcK said: LibreELEC with a USB hauppauge 950q tuner. That might be it - I'm TBS open source Link to comment
s.Oliver Posted March 14, 2018 Share Posted March 14, 2018 (edited) @CHBMB sorry, been overly busy with day-to-day workload; couldn't respond earlier. i'll test the final v6.5 LibreELEC build with my new Digital Devices Tuner card and report back. last test i did showed lots of errors like these: [WARNING] linuxdvb: Unable to provide BER value. [WARNING] linuxdvb: Unhandled ERROR_BLOCK_COUNT scale: 0 [WARNING] linuxdvb: Unable to provide UNC value.[WARNING] tbl-pass: pass-eit: -: invalid checksum (len 785, errors 1) [WARNING] tbl-pass: pass-sdt: -: invalid checksum (len 388, errors 1) [WARNING] tbl-pass: pass-eit: -: invalid checksum (len 18, errors 1) although shown as warning in the TVH log, they were shown as errors to the responding (running at that time) recordings. i hadn't got the time back then, to investigate, if these errors would've been discoverable in the recorded shows, but because of the massive amount (like 15-30 errors per recording) i switched back immediately to the github build – and had no errors at all. and i need to add, that this github build (6.4.1) with that new DD card outperforms the previous TBS card (which showed a few errors from time to time compared to no errors with the DD card). hopefully the v6.5 LibreELEC build (and the associated drivers) will work like the ones right now. Edited March 14, 2018 by s.Oliver Link to comment
s.Oliver Posted March 14, 2018 Share Posted March 14, 2018 (edited) 8 minutes ago, CHBMB said: v6.5.0 builds uploaded. hey @CHBMB just installed 6.5 LibreELEC and ran immediately into a problem: OSCam docker doesn't see usb-reader. worked always flawlessly, this time errors with "Opening device /dev/bus/usb/003/003 (errno=13 Permission denied)" or ".../dev/ttyUSB0..." (same access denied). i compared the permissions for the device, they seems same as before. i tried to set docker as "Privilleged" no joy also. need help, please. Edited March 14, 2018 by s.Oliver Link to comment
DZMM Posted March 14, 2018 Share Posted March 14, 2018 23 minutes ago, CHBMB said: v6.5.0 builds uploaded. Tuners not appearing - had to run: chmod -R 777 /dev/dvb/ Putting back in my go file. Think a warning needs adding to this thread or the plugin, otherwise I think more users will get caught out Link to comment
s.Oliver Posted March 14, 2018 Share Posted March 14, 2018 Just now, DZMM said: Tuners not appearing - had to run: chmod -R 777 /dev/dvb/ Putting back in my go file. Think a warning needs adding to this thread or the plugin, otherwise I think more users will get caught out didn't need to do this. so it seems different for diff. users (you were maybe on RC before?). Link to comment
DZMM Posted March 14, 2018 Share Posted March 14, 2018 4 minutes ago, s.Oliver said: didn't need to do this. so it seems different for diff. users (you were maybe on RC before?). what tuners are you using? I'm TBS on TBS OS version Link to comment
s.Oliver Posted March 14, 2018 Share Posted March 14, 2018 Just now, DZMM said: what tuners are you using? I'm TBS on TBS OS version have an Digital Device Card running with the LibreELEC build. do you use a docker which access an USB device like a card reader? Link to comment
CHBMB Posted March 14, 2018 Share Posted March 14, 2018 The new updated plugin does the chmod on server start up. Link to comment
Recommended Posts