[Plugin] Linuxserver.io - Unraid DVB


Recommended Posts

9 hours ago, CHBMB said:

 

I'd appreciate it if someone does.  I just install the drivers in Unraid for people to use, I really have no control over whether they work or not.  Unless people report broken stuff to the manufacturers, then stuff will stay broken.

Opened a ticket at Digital Devices:

Case Tracking ID: PQB-Q98-951V

Lets see if they care about linux at all. 

It's a pity that Digital Devices cards once configured, run perfectly, but I had a long frustrating period with them when I was running them on Ubuntu.

 

Link to comment

Hi

 

First of all, great plugin. Been using it for months, never had a single problem.

 

With 6.5.2 version, i'm getting errors related to my tuner (DVBSky T330).

 

May 17 18:03:35 NAS kernel: si2157 6-0060: found a 'Silicon Labs Si2157-A30'
May 17 18:03:35 NAS kernel: si2157 6-0060: firmware version: 3.0.5
May 17 18:03:35 NAS kernel: usb 1-2: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000)
May 17 18:03:35 NAS kernel: si2168 5-0064: Direct firmware load for dvb-demod-si2168-02.fw failed with error -2
May 17 18:03:35 NAS kernel: si2168 5-0064: Direct firmware load for dvb-demod-si2168-02.fw failed with error -2
May 17 18:03:35 NAS kernel: si2168 5-0064: firmware file 'dvb-demod-si2168-02.fw' not found

 

lsusb: Bus 001 Device 003: ID 0572:0320 Conexant Systems (Rockwell), Inc. DVBSky T330 DVB-T2/C tuner

 

unRAID Version: 6.5.2
Linux Kernel Version: 4.14.40
DVB Version: LibreELEC
Driver Version: 1.22
DVB Kernel: Detected
DVB Adapter Drivers: Detected
DVB Adapter 0: Silicon Labs Si2168

 

The "/lib/firmware/" is read-only, so I tried to copy the fw file using the go script.

 

I copied the fw file to /boot/firmware/ and added to the script:

 

#!/bin/bash

# Start the Management Utility

/usr/local/sbin/emhttp &

#copy dvb fw

echo "Copy fw" | logger

cp /boot/firmware/*fw /lib/firmware/

 

 

May 17 20:32:24 NAS root: plugin: installed
May 17 20:32:24 NAS root: Starting go script
May 17 20:32:24 NAS root: Copy fw
May 17 20:32:24 NAS root: Starting emhttpd


But i cant find the 'dvb-demod-si2168-02.fw' on the /lib/firmware folder :(

 

Any ideas?

 

 

Edited by du.perin
add lsusb info / go script
Link to comment

Hi, CHBMB

 

Can you think of any reason why LE 6.5.2-rc2 works on my Hauppauge 950q, but 6.5.2 doesn't?  With 6.5.2, the driver is loaded, the adapter is detected, but I get no signal when trying to tune a channel. Only thing I see is that the filesize of bzfirmware is 11M with 6.5.2-rc2 and 4.5M with 6.5.2.

 

 

 

Link to comment
1 hour ago, DMcK said:

Hi, CHBMB

 

Can you think of any reason why LE 6.5.2-rc2 works on my Hauppauge 950q, but 6.5.2 doesn't?  With 6.5.2, the driver is loaded, the adapter is detected, but I get no signal when trying to tune a channel. Only thing I see is that the filesize of bzfirmware is 11M with 6.5.2-rc2 and 4.5M with 6.5.2.

 

 

 

Same here! Just tried with LE 6.5.2-rc2 and my tuner is back to business. 

 

May 17 23:54:06 NAS kernel: si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
May 17 23:54:07 NAS kernel: si2168 5-0064: firmware version: B 4.0.11
May 17 23:54:07 NAS kernel: si2157 6-0060: found a 'Silicon Labs Si2157-A30'
May 17 23:54:07 NAS kernel: si2157 6-0060: firmware version: 3.0.5

Link to comment

hey @CHBMB, Drivers for cx23885 seem to have gone again too, from both 6.5.2-rc2 and 6.5.2 - LibreELEC build

root@Daedalus:~# modprobe cx23885
modprobe: FATAL: Module cx23885 not found in directory /lib/modules/4.14.40-unRAID

 

Edited by ProGEEK
Link to comment
hey [mention=6219]CHBMB[/mention], Drivers for cx23885 seem to have gone again too, from both 6.5.2-rc2 and 6.5.2 - LibreELEC build
root@Daedalus:~# modprobe cx23885modprobe: FATAL: Module cx23885 not found in directory /lib/modules/4.14.40-unRAID

 

I know, see the above three posts. I was playing around/breaking the script.
Link to comment
1 hour ago, nuhll said:

Is the a new version for the newest unraid version for libre? When i go to unraid DVB plugin, it just loads forever   "Updating available builds"

 

 

Try uninstalling/installing the plugin again and/or a reboot.

Link to comment
7 minutes ago, CHBMB said:

Hmmm, what version did you upgrade from, I did remove the older versions in an effort to reduce our hosting costs.....

Upgraded from 6.4.2 to 6.5.2 as all previous 6.5.x releases have given me issues

Im building the modules manually and i see that in your .config, CX23885 is disabled

Edited by ProGEEK
Link to comment
Upgraded from 6.4.2 to 6.5.2 as all previous 6.5.x releases have given me issues

Im building the modules manually and i see that in your .config, CX23885 is disabled
Yeah, must have buggered up the config, will fix it.....
Link to comment

Hm. 

 

Doesnt show up in piholes log at all.

 

It might be the case that pihole is blocking the accesses.

 

No doesnt show up, also, in unraid, pihole is not set as dns server, but just wanted to make sure. (tried again restarting)

 

Any idea?

 

Finally found something in log



May 21 13:31:05 Unraid-Server nginx: 2018/05/21 13:31:05 [error] 4429#4429: *660 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.86.42, server: , request: "POST /plugins/UnraidDVB/include/exec.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "192.168.86.2:81", referrer: "http://192.168.86.2:81/Settings/UnraidDVB"

Edited by nuhll
Link to comment
On 5/21/2018 at 12:21 PM, nuhll said:

Hm. 

 

Doesnt show up in piholes log at all.

 

It might be the case that pihole is blocking the accesses.

 

No doesnt show up, also, in unraid, pihole is not set as dns server, but just wanted to make sure. (tried again restarting)

 

Any idea?

 

Finally found something in log

 

 

 

ping -c4 mirror.linuxserver.io

See if that works from your Unraid machine, if it doesn't and your plugin is the most recent version (2018.03.14) then it's something your end.

Link to comment
30 minutes ago, CHBMB said:

 


ping -c4 mirror.linuxserver.io

See if that works from your Unraid machine, if it doesn't and your plugin is the most recent version (2018.03.14) then it's something your end.

 

Thanks for your help!

 

Good idea.

 

root@Unraid-Server:~# ping -c4 mirror.linuxserver.io
PING mirror.linuxserver.io (46.101.228.190) 56(84) bytes of data.
64 bytes from 46.101.228.190: icmp_seq=1 ttl=54 time=36.9 ms
64 bytes from 46.101.228.190: icmp_seq=2 ttl=54 time=47.8 ms
64 bytes from 46.101.228.190: icmp_seq=3 ttl=54 time=35.9 ms
64 bytes from 46.101.228.190: icmp_seq=4 ttl=54 time=44.7 ms

--- mirror.linuxserver.io ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 7095ms
rtt min/avg/max/mdev = 35.973/41.391/47.882/5.083 ms

 

2018.03.14 

Edited by nuhll
Link to comment
  • Squid locked this topic
Guest
This topic is now closed to further replies.