gogos Posted June 27, 2019 Share Posted June 27, 2019 Files seem to be OK. You could also try 'download' commands out of array folder /mnt/user. Make a directory under /boot (It represents / folder of flash drive as I remember) cd /boot mkdir minecraft cd minecraft cp /mnt/user/minecraft/download.sh . chmod +x download.sh ./download.sh BTW, run command: df -h to check if you have enough free space on filesystems Link to comment
j0nnymoe Posted June 27, 2019 Share Posted June 27, 2019 (edited) 8 hours ago, Mike Rando said: I thought I did. I just updated to 6.7.2 and remade download.sh and double verified I changed it to unix. I did get it to run this time, but in the code I saw a disturbing amount of: ...but it did end with this hopeful sign. I'm going to reboot and give it a try... Update: No change that I can tell. When I go to the Unraid DVB plugin page, the splash doesn't go away. Behind the splash I see that DVB Version and Driver Version are blank. More importantly, when I add "--device=/dev/dvb/" in the plex container it says "error gathering device information while adding custom device "/dev/dvb": no such file or directory." I do see a new "download" folder was created with 10 "bz" files created. I assume my issue is related to those 404s, so here's an example of the error. (Please let me know if I am sending sensitive IP data, I'm noob). Pretty sure it's 404'ing because we haven't released unraid DVB package for 6.7.2 yet..... Edited June 27, 2019 by j0nnymoe Link to comment
Mike Rando Posted June 27, 2019 Share Posted June 27, 2019 10 minutes ago, j0nnymoe said: Pretty sure it's 404'ing because we haven't released unraid DVB package for 6.7.2 yet..... Is there an ETA? Should I roll back to 6.7.1? How do I do that? Link to comment
j0nnymoe Posted June 27, 2019 Share Posted June 27, 2019 Just now, Mike Rando said: Is there an ETA? Should I roll back to 6.7.1? How do I do that? ETA is when it's ready. Rolling back will be the same way as you install any release. Link to comment
CHBMB Posted June 27, 2019 Share Posted June 27, 2019 @Mike Rando Might be helpful if you tell us what hardware you're trying to get working and what build you've tried There's no point in just keep trying the same thing and posting snippets of bash outputs, it has no context and I can't interpret that. The more information you can provide me, the more I can help, I'm busy with a lot of real life stuff at the moment, and that has priority, so when I see any post which doesn't have enough info, I'm filtering them out my brain due to time constraints. Link to comment
Mike Rando Posted June 28, 2019 Share Posted June 28, 2019 14 hours ago, CHBMB said: @Mike Rando Might be helpful if you tell us what hardware you're trying to get working and what build you've tried There's no point in just keep trying the same thing and posting snippets of bash outputs, it has no context and I can't interpret that. The more information you can provide me, the more I can help, I'm busy with a lot of real life stuff at the moment, and that has priority, so when I see any post which doesn't have enough info, I'm filtering them out my brain due to time constraints. Mobo: X8SIL CPU: X3470 RAM: 32 GiB DDR3 Single-bit ECC Cache is 240 GB PNY SSD and I have 2 8TB whites (one is parity) I'm trying to get a Hauppauge USB antenna to work in plex. Need any other hardware? Link to comment
CHBMB Posted June 28, 2019 Share Posted June 28, 2019 Mobo: X8SIL CPU: X3470 RAM: 32 GiB DDR3 Single-bit ECC Cache is 240 GB PNY SSD and I have 2 8TB whites (one is parity) I'm trying to get a Hauppauge USB antenna to work in plex. Need any other hardware? Can you tell me the exact Hauppage model please?Sent from my Mi A1 using Tapatalk Link to comment
Vitor Ventura Posted June 28, 2019 Share Posted June 28, 2019 (edited) Hello there, After upgrade to 6.7.1 rc2, Unraid Dvb stop detect my Xbox One Tuner. Any advise? EDIT: Downgrade to 6.7.1 rc1, and is detected. Edited June 28, 2019 by Vitor Ventura Link to comment
saarg Posted June 28, 2019 Share Posted June 28, 2019 2 hours ago, Vitor Ventura said: Hello there, After upgrade to 6.7.1 rc2, Unraid Dvb stop detect my Xbox One Tuner. Any advise? EDIT: Downgrade to 6.7.1 rc1, and is detected. Why aren't you using 6.7.1 stable? 1 Link to comment
Vitor Ventura Posted June 28, 2019 Share Posted June 28, 2019 15 minutes ago, saarg said: Why aren't you using 6.7.1 stable? Honostly? Don't know! I thought this was stable one... But, thanks anyway. Sticking with rc1, until 6.7.2! Link to comment
dstanley Posted June 28, 2019 Share Posted June 28, 2019 Just now, Vitor Ventura said: Honostly? Don't know! I thought this was stable one... But, thanks anyway. Sticking with rc1, until 6.7.2! This is the progression of releases: 6.7.1rc1 worked with USB Hauppauge 6.7.1rc2 did NOT work with USB Hauppauge 6.71 DOES work with USB Hauppauge and is NEWER that rc1 and rc2 - it is the release stable version - i.e.: Not a Release Candidate. 1 Link to comment
Vitor Ventura Posted June 28, 2019 Share Posted June 28, 2019 9 minutes ago, dstanley said: This is the progression of releases: 6.7.1rc1 worked with USB Hauppauge 6.7.1rc2 did NOT work with USB Hauppauge 6.71 DOES work with USB Hauppauge and is NEWER that rc1 and rc2 - it is the release stable version - i.e.: Not a Release Candidate. Many thanks. Updating soon to 6.7.1 Thanks again Link to comment
Mike Rando Posted June 28, 2019 Share Posted June 28, 2019 9 hours ago, CHBMB said: Can you tell me the exact Hauppage model please? Sent from my Mi A1 using Tapatalk Hauppauge WinTV-DualHD Dual USB 2.0 1595 Link to comment
Mike Rando Posted June 29, 2019 Share Posted June 29, 2019 (edited) 6 hours ago, CHBMB said: v6.7.2 uploaded I reran ./download.sh and my 404s are gone. rebooting currently, then I'll confirm if DVB is working for me now. Edit: Still the same issues. Loading the plugin times out on the splash (no DVB version or driver version in the background), and I get a "no such file or directory" when I add "--device=/dev/dvb/" to plex. CHBMB, what do you mean in your instructions when you say "Then copy the files across to the flash disk."? Edited June 29, 2019 by Mike Rando update. Link to comment
dstanley Posted June 29, 2019 Share Posted June 29, 2019 6 hours ago, CHBMB said: v6.7.2 uploaded Thank you - just a note that it works just fine with Hauppauge USB HD-PVR's - Thanks @CHBMB for your ongoing support of this DVB Edition Link to comment
CHBMB Posted June 29, 2019 Share Posted June 29, 2019 I reran ./download.sh and my 404s are gone. rebooting currently, then I'll confirm if DVB is working for me now. Edit: Still the same issues. Loading the plugin times out on the splash (no DVB version or driver version in the background), and I get a "no such file or directory" when I add "--device=/dev/dvb/" to plex. CHBMB, what do you mean in your instructions when you say "Then copy the files across to the flash disk."? Copy the bzroot bzimage bzroot-gui bzmodules and bzfirmware files to your USB stick from which you boot Unraid, replacing the existing files.Sent from my Mi A1 using Tapatalk Link to comment
Mike Rando Posted June 29, 2019 Share Posted June 29, 2019 (edited) 21 minutes ago, CHBMB said: Copy the bzroot bzimage bzroot-gui bzmodules and bzfirmware files to your USB stick from which you boot Unraid, replacing the existing files. Sent from my Mi A1 using Tapatalk Thanks. I'm new to unRaid (obviously), am I going to have to pull my USB a lot? I thought I was being smart pluging it into the jack directly on the motherboard in the case. If I have to pull it often this will become a pain. Also a face plam moment. I just powered down my server to pull the USB to copy the files, only to later remember the files are on a server share drive. EDIT: Splash screen still doesn't go away, but it does show a DVB and driver version behind it. And more importantly "--device=/dev/dvb/" didn't show an error in plex... and the antenea shows up in plex! Looks like all my critical issues are fixed now! Hats off to you guys. Thanks for being patient. Edited June 29, 2019 by Mike Rando duh Link to comment
saarg Posted June 29, 2019 Share Posted June 29, 2019 1 hour ago, Mike Rando said: Thanks. I'm new to unRaid (obviously), am I going to have to pull my USB a lot? I thought I was being smart pluging it into the jack directly on the motherboard in the case. If I have to pull it often this will become a pain. Also a face plam moment. I just powered down my server to pull the USB to copy the files, only to later remember the files are on a server share drive. EDIT: Splash screen still doesn't go away, but it does show a DVB and driver version behind it. And more importantly "--device=/dev/dvb/" didn't show an error in plex... and the antenea shows up in plex! Looks like all my critical issues are fixed now! Hats off to you guys. Thanks for being patient. Why did you take out the USB? You only had to copy it to /boot/ while your server was running. 1 Link to comment
Vitor Ventura Posted June 30, 2019 Share Posted June 30, 2019 Is possible have this plugin (DVB) and Nvidia plugin working simultaneously? Link to comment
BRiT Posted June 30, 2019 Share Posted June 30, 2019 Yes, just need two different servers. 😛 1 Link to comment
Vitor Ventura Posted June 30, 2019 Share Posted June 30, 2019 36 minutes ago, BRiT said: Yes, just need two different servers. 😛 🤘 ahahahahah top answer! Thanks anyway, that's sad! Link to comment
nebosa Posted July 1, 2019 Share Posted July 1, 2019 Hello, I also have the problem that I do not get past the PopUp: Unraid DVB, updating available builds. I have tried it with different browsers but the popup stops and I do not see any versions. Unraid 6.7.0 Is there a solution for this ? Unfortunately I have to torture myself with the Google translator through the forum Currently my server is still working. Can / Should I delete the plugin and then reinstall? When trying to start the script download.sh on the console 404 Error occurs. Abstract: --2019-07-01 18: 18: 49-- https://lsio.ams3.digitaloceanspaces.com/unraid-dvb/6-7-28/libreelec/bzroot.sha256 Resolving lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) ... 5,101,110,225 Connecting to lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) | 5.101.110.225 |: 443 ... connected. HTTP request sent, awaiting response ... 404 Not Found 2019-07-01 18:18:54 ERROR 404: Not Found. --2019-07-01 18: 18: 54-- https://lsio.ams3.digitaloceanspaces.com/unraid-dvb/6-7-28/libreelec/bzroot-gui.sha256 Resolving lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) ... 5,101,110,225 Connecting to lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) | 5.101.110.225 |: 443 ... connected. HTTP request sent, awaiting response ... 404 Not Found 2019-07-01 18:18:59 ERROR 404: Not Found. --2019-07-01 18: 18: 59-- https://lsio.ams3.digitaloceanspaces.com/unraid-dvb/6-7-28/libreelec/bzfirmware.sha256 Resolving lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) ... 5,101,110,225 Connecting to lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) | 5.101.110.225 |: 443 ... connected. HTTP request sent, awaiting response ... 404 Not Found 2019-07-01 18:19:04 ERROR 404: Not Found. Thanks for your help ! Link to comment
saarg Posted July 1, 2019 Share Posted July 1, 2019 1 hour ago, nebosa said: Hello, I also have the problem that I do not get past the PopUp: Unraid DVB, updating available builds. I have tried it with different browsers but the popup stops and I do not see any versions. Unraid 6.7.0 Is there a solution for this ? Unfortunately I have to torture myself with the Google translator through the forum Currently my server is still working. Can / Should I delete the plugin and then reinstall? When trying to start the script download.sh on the console 404 Error occurs. Abstract: --2019-07-01 18: 18: 49-- https://lsio.ams3.digitaloceanspaces.com/unraid-dvb/6-7-28/libreelec/bzroot.sha256 Resolving lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) ... 5,101,110,225 Connecting to lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) | 5.101.110.225 |: 443 ... connected. HTTP request sent, awaiting response ... 404 Not Found 2019-07-01 18:18:54 ERROR 404: Not Found. --2019-07-01 18: 18: 54-- https://lsio.ams3.digitaloceanspaces.com/unraid-dvb/6-7-28/libreelec/bzroot-gui.sha256 Resolving lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) ... 5,101,110,225 Connecting to lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) | 5.101.110.225 |: 443 ... connected. HTTP request sent, awaiting response ... 404 Not Found 2019-07-01 18:18:59 ERROR 404: Not Found. --2019-07-01 18: 18: 59-- https://lsio.ams3.digitaloceanspaces.com/unraid-dvb/6-7-28/libreelec/bzfirmware.sha256 Resolving lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) ... 5,101,110,225 Connecting to lsio.ams3.digitaloceanspaces.com (lsio.ams3.digitaloceanspaces.com) | 5.101.110.225 |: 443 ... connected. HTTP request sent, awaiting response ... 404 Not Found 2019-07-01 18:19:04 ERROR 404: Not Found. Thanks for your help ! Looks like you have input 6.7.28 as the version. Should be 6.7.2 Link to comment
nebosa Posted July 1, 2019 Share Posted July 1, 2019 (edited) shame on Yes, that's right ! The download worked. What do I do with the files now? Just copy over the old ones? I find the files 2 * in / boot and in / boot / previous Edited July 1, 2019 by nebosa Link to comment
Recommended Posts