March 30, 201610 yr I received a new HTST drive model HDS723020ALA640. I installed it in the box and attempted to boot unRAID normally. It took several minutes longer to boot and then the GUI was unresponsive. I powered down, disconnected the drive, unRAID booted normally. I tried again, power down, connected drive, powered up and it took forever. I switched the monitor over to watch the video feed from the unRAID box and saw a lot more linux go by on the screen than normal. Is there a way to capture that so I can upload it to this thread? I put the drive in a USB enclosure and plugged it into a windows machine. Windows recognized it in disk manager. I didn't try initializing or formatting it. Any suggestions or do I need to ship this drive back to the seller? thx Everend
March 30, 201610 yr Author No, I plugged the drive in/out and restarted at least 4 times using different sata ports and cables. Each time the GUI was unresponsive or VERY slow when this drive was connected. It was the next day that another drive red-ex apparently because of a bad sata cable. http://lime-technology.com/forum/index.php?topic=47916.msg459331#msg459331
Archived
This topic is now archived and is closed to further replies.