USB Devices

 

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 007 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 002 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 005 Device 002: ID 2222:3061 MacAlly

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 004 Device 003: ID 0c45:7605 Microdia

Bus 004 Device 002: ID 0403:f850 Future Technology Devices International, Ltd USB-UIRT (Universal Infrared Receiver+Transmitter)

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 011 Device 002: ID 152d:0567 JMicron Technology Corp. / JMicron USA Technology Corp. JMS567 SATA 6.0Gb/s bridge

Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 010 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply

Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 008 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver

Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

 

Process to recreate:

[*]Start Windows 7 VM with only the 046d:c52b Logitech, Inc. Unifying Receiver as pass-through and all us fine

[*]Shutdown and add the ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC to pass through

[*]Start VM and install drivers and program for LCD character panel

[*]Shutdown and add the ID 0403:f850 IR Transceiver to pass-through

[*]Start VM and Windows 7 comes up and my keyboard and mouse on the 046d:c52b do not work

[*]So then I have to force shutdown VM and remove the ID 0403:f850 IR Transceiver from the pass-through

[*]Start VM and mouse and keyboard still do not work

[*]Force shutdown all VMs

[*]WebGUI and stop array and powerdown and start computer again

[*]VMs start up

[*]The Windows 7 VM mouse and keyboard are working again

 

So the problem is the same vendor?  Even though the Device IDs are different?

 

I have a RAZER keyboard and mouse and have problems with the keyboard not always passing through.

 

I can normally resolve mine by shutting down the vm (as the mouse always works) waiting a minute or two then powering the VM backup from a different device via the web interface.

 

I have no idea why the keyboard gets associated with unraid ever as I always use my RPi 3 to control unraid and never do anything locally.

 

Edit:

There is a way to pass the device through differently so that the vendor name is not involved.

 

This may help ya out:

http://lime-technology.com/forum/index.php?topic=41650.0