thegizzard Posted April 29, 2016 Share Posted April 29, 2016 Redball drive. Replaced it. It was failing smart. But passed a preclear_disk.sh. Can I risk adding it back in the array? Quote Link to comment
earthworm Posted April 29, 2016 Share Posted April 29, 2016 How did it fail smart? How many preclear passes? Using the same port/cable? Quote Link to comment
thegizzard Posted April 30, 2016 Author Share Posted April 30, 2016 1 preclear pass. same port/cable. Here is the smart report SMART status Info for /dev/sdn smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.3-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-1CH166 Serial Number: W1F22G4E LU WWN Device Id: 5 000c50 05df3b3b1 Firmware Version: CC24 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Apr 29 21:01:52 2016 EDT ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/223651en SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 332) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 112 091 006 Pre-fail Always - 50035624 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3560 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 056 052 030 Pre-fail Always - 884859555160 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 26149 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 135 183 Runtime_Bad_Block 0x0032 098 098 000 Old_age Always - 2 184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 454 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 2 2 2 189 High_Fly_Writes 0x003a 090 090 000 Old_age Always - 10 190 Airflow_Temperature_Cel 0x0022 066 056 045 Old_age Always - 34 (Min/Max 27/39) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 105 193 Load_Cycle_Count 0x0032 083 083 000 Old_age Always - 34387 194 Temperature_Celsius 0x0022 034 044 000 Old_age Always - 34 (0 10 0 0 0) 197 Current_Pending_Sector 0x0012 095 095 000 Old_age Always - 832 198 Offline_Uncorrectable 0x0010 095 095 000 Old_age Offline - 832 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 3471h+48m+21.976s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 21452006032 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 386861898571 SMART Error Log Version: 1 ATA Error Count: 454 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 454 occurred at disk power-on lifetime: 26137 hours (1089 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d1 00 ff ff ff ef 00 4d+17:39:54.925 READ DMA EXT 25 d1 00 ff ff ff ef 00 4d+17:39:54.423 READ DMA EXT 25 d1 00 ff ff ff ef 00 4d+17:39:54.403 READ DMA EXT 25 d1 00 ff ff ff ef 00 4d+17:39:54.402 READ DMA EXT 25 d1 00 ff ff ff ef 00 4d+17:39:54.401 READ DMA EXT Error 453 occurred at disk power-on lifetime: 26137 hours (1089 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 4d+17:39:10.786 READ DMA EXT 27 00 00 00 00 00 e0 00 4d+17:39:10.763 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 4d+17:39:10.743 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 4d+17:39:10.723 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 00 4d+17:39:10.703 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 452 occurred at disk power-on lifetime: 26137 hours (1089 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 4d+17:39:07.325 READ DMA EXT 25 00 00 ff ff ff ef 00 4d+17:39:07.314 READ DMA EXT 27 00 00 00 00 00 e0 00 4d+17:39:07.293 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 4d+17:39:07.273 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 4d+17:39:07.253 SET FEATURES [set transfer mode] Error 451 occurred at disk power-on lifetime: 26137 hours (1089 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 ff ff ff ef 00 4d+17:39:03.133 READ DMA EXT 25 00 00 ff ff ff ef 00 4d+17:39:03.129 READ DMA EXT 25 00 10 ff ff ff ef 00 4d+17:39:02.896 READ DMA EXT 25 00 10 ff ff ff ef 00 4d+17:39:02.872 READ DMA EXT 25 00 10 ff ff ff ef 00 4d+17:39:02.872 READ DMA EXT Error 450 occurred at disk power-on lifetime: 26137 hours (1089 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 4d+17:38:57.994 READ DMA EXT 27 00 00 00 00 00 e0 00 4d+17:38:57.973 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 4d+17:38:57.953 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 4d+17:38:57.933 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 00 4d+17:38:57.914 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 26149 4135505512 # 2 Short offline Completed without error 00% 26040 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Quote Link to comment
trurl Posted April 30, 2016 Share Posted April 30, 2016 ... 184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 454 ... 197 Current_Pending_Sector 0x0012 095 095 000 Old_age Always - 832 198 Offline_Uncorrectable 0x0010 095 095 000 Old_age Offline - 832 Known ATA S.M.A.R.T. attributes Quote Link to comment
thegizzard Posted April 30, 2016 Author Share Posted April 30, 2016 I guess I still don't understand. Is this telling me the drive is bad? Quote Link to comment
John_M Posted April 30, 2016 Share Posted April 30, 2016 "Failing now". It could hardly be clearer Quote Link to comment
trurl Posted April 30, 2016 Share Posted April 30, 2016 For future reference. From that wikipedia article I linked: Critical: pink colored row Potential indicators of imminent electromechanical failure Each and every one of those lines I excerpted from your SMART were "in the pink". You could also search this forum for any of those and you would have found similar. See search tips in my sig. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.