January 23, 20224 yr 10 hours ago, matty2k said: My warning regarding DNS is gone since I added local domain „fritz.box“ in pi-hole. So you mean the pihole is now resolving NASA.fritz.box to the correct IP inside your network? That is perfect.
January 24, 20224 yr Yes. And I do not get any error from CA. IP address was correct before too, but not the local domain name. Edited January 24, 20224 yr by matty2k
January 26, 20224 yr Author Just as an FYI, this release adds in some shares vs cache pool settings. For those who have been waiting for it, Selectable Tests has now bubbled up to be the next item on this plugin's agenda.
January 26, 20224 yr 2 hours ago, Squid said: Just as an FYI, this release adds in some shares vs cache pool settings. Getting this: Quote Share appdata set to use pool , but files / folders exist on the cache pool Share domains set to use pool , but files / folders exist on the cache pool Share syslogs set to use pool , but files / folders exist on the cache pool Share system set to use pool , but files / folders exist on the cache pool I don't understand. They are all set to "Only : Cache" so files/folders should exist there? I have two pools (named cache and temp_hdd), 3 devices in total. Edited January 26, 20224 yr by Niklas
January 27, 20224 yr 13 hours ago, Squid said: Post your diagnostics so I can also understand The warnings cleared after the new update.
January 29, 20224 yr Suggestion, or maybe if there is a way to do this and I didn't see it let me know: A flag (checkbox in the UI) to ignore sending alerts if there are docker updates. Netdata, for an example, has updates just about every day. And I auto-update my containers overnight automatically. Yet, since there is a discrepancy between when this plugin runs its scans (or detects updates in Docker that are available), I get beeped every morning around 3 AM or so from my phone. 95% of the time, it's from this plugin, and its because I have an update available for some container, which will be auto-updated within 24 hours anyway.
January 29, 20224 yr Author 18 minutes ago, Pendragon1 said: I went to "apps" and got the message posted below. I ran the log and it just said "undefined" and my home screen was blank except for the unraid template. "array devices" "boot device" and so on. but no drives were showing. Something really wrong went on during get.docx 29.93 kB · 1 download Your RAM is full. Reboot is your easiest resolution, but you'll need to ultimately figure out why. The file it tried to write was about 200K. Various possibilities for this. You've applied the hack floating around here that moves the docker logs to RAM and something is doing massive logging, a docker container due to a misconfiguration on the template paths is writing to RAM instead of appdata / downloads / image, you've got a very limited amount of RAM on the server (2GB isn't enough -> functional minimum of 4GB)
January 29, 20224 yr I have 16gb of ram... I sent transcoding for plex to the ram. Is that not a good idea or should I just add another 16gb of ram to make up for the use for transcoding?
January 29, 20224 yr Author I'm also transcoding to RAM. If Plex isn't deleting the files then that's the issue (I've got no problems with it). It was simply one of a long list of possibilities What the output of du -h /tmp Diagnostics might also help
January 29, 20224 yr Author This command du / -h -d2 --exclude="/proc" 2>/dev/null Will actually help a lot better in determining the space where everything is stored. Might take a couple of minutes to complete, and needs to be cross-referenced against diagnostics (for what drives you have installed vs where the data actually is), but will detail enough to show you (and us) the actual usage
January 30, 20224 yr Author 11M /config/Library 11M /config There's nothing right now that's excessive use, but you've got Plex setup wrong in the template. I had already replied in the other thread
January 30, 20224 yr Hi Folks I hope I am posting in the correct group? got a strange error message that came up after fix common problems ran can you please advise see screen shot below every thing that I have running works ok and everything is kept updated and I have not had any power cuts etc... I am scratching my head at the moment?
January 30, 20224 yr Author Do you have a cache pool named "cache" What are the share settings for those shares in question? If you can't sort it out, then post your diagnostics
January 30, 20224 yr I installed a USB 2.5Gbe NIC to do some speed testing and configured it to be on the same subnet as the main NIC. I later removed the NIC. Now I am getting the "Multiple NICs on the same IPv4 network" warning; however, there is no longer an eth1 to reconfigure. I don't see any way of fixing this error without re-installing the NIC, which feels a bit like unintended behavior.
January 31, 20224 yr 1 hour ago, Excessus said: I installed a USB 2.5Gbe NIC to do some speed testing and configured it to be on the same subnet as the main NIC. I later removed the NIC. Now I am getting the "Multiple NICs on the same IPv4 network" warning; however, there is no longer an eth1 to reconfigure. I don't see any way of fixing this error without re-installing the NIC, which feels a bit like unintended behavior. Upload your diagnostics please (from Tools -> Diagnostics)
January 31, 20224 yr 22 hours ago, Squid said: Do you have a cache pool named "cache" What are the share settings for those shares in question? If you can't sort it out, then post your diagnostics Hi Squid With regards to your question I do not have a "cache" pool and I downloaded the diagnostics file however while looking at your Fix common problems it showered there was an update. I ran the update that rescanned my system and the error messages disappeared.
February 1, 20224 yr On 1/23/2022 at 5:17 AM, matty2k said: My warning regarding DNS is gone since I added local domain „fritz.box“ in pi-hole. Do you have an explanation for how to do this? I am facing the same error and am not sure what to edit on the pihole.
February 21, 20224 yr I am getting the error about my bonding being enabled but when I check the settings bonding is off, the boot/config/network.cfg has IFNAME[1]="bond1" BONDNAME[1]="bond1" BONDNICS[1]="eth1" BONDING_MODE[1]="2" BONDING_MIIMON[1]="100"
February 22, 20224 yr 21 hours ago, dodgeman said: I am getting the error about my bonding being enabled but when I check the settings bonding is off, the boot/config/network.cfg has IFNAME[1]="bond1" BONDNAME[1]="bond1" BONDNICS[1]="eth1" BONDING_MODE[1]="2" BONDING_MIIMON[1]="100" Save a file of network.cfg locally, then delete it from the server and reboot. The system will generate a new network.cfg and get an IP address from DHCP when it boots. If you don't want a DHCP address, post the full network.cfg here
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.