October 25, 20223 yr This plugin is reporting many warnings on my Unraid server, but they are all Docker container updates. I can ignore them individually, but that only ignores the one specific Docker container, and warnings are still generated for other Docker containers. I would prefer not to receive any warnings for Docker container updates. Is there a way to disable this entire category of warning?
October 26, 20223 yr Good Morning. I found that my system is reporting "/var/log is getting full (currently 100 % used)". My server has only been up for 1 day & 8 hours. Attached are the diagnostics. I do not know where to start? datavault-diagnostics-20221026-0514.zip
October 26, 20223 yr I believe that updating the Recycle Bin plugin to the latest version and then rebooting willbresolve your issue.
October 26, 20223 yr 11 hours ago, itimpi said: I believe that updating the Recycle Bin plugin to the latest version and then rebooting willbresolve your issue. Thank you, I tried and it looks good.
October 29, 20223 yr On 10/26/2022 at 5:44 AM, AndreBotha said: Good Morning. I found that my system is reporting "/var/log is getting full (currently 100 % used)". My server has only been up for 1 day & 8 hours. Attached are the diagnostics. I do not know where to start? datavault-diagnostics-20221026-0514.zip 284.71 kB · 2 downloads Good Morning the error message still appears /var/log is getting full (currently 100 % used). datavault-diagnostics-20221029-0457.zip
October 29, 20223 yr 24 minutes ago, AndreBotha said: Good Morning the error message still appears /var/log is getting full (currently 100 % used). datavault-diagnostics-20221029-0457.zip 269.89 kB · 0 downloads Progress, I just again noticed an update needed for recycle bin to 26a, after I've deleted it and re-installed it earlier in the week's response. Looks like I should put Recycle bin in the Recycle Bin
November 3, 20223 yr So, I've been running unraid for about a week now and I keep getting random restarts and I think they are related to the issue spotted Fix Common Problems. I'm not sure what the error means or how to tell exactly what is causing the restarts. It says to install mcelog from nerdtools, but nerd tools does not have mcelog at this time. If anyone could take a look and give me a little help I would greatly appreciate it. Also, here are the couple lines of the mce error from the system logs Nov 2 00:47:14 mserver22 kernel: mce: [Hardware Error]: CPU 4: Machine Check: 0 Bank 5: bea0000000000108 Nov 2 00:47:14 mserver22 kernel: mce: [Hardware Error]: TSC 0 ADDR 1ffff817f06ea MISC d012000100000000 SYND 4d000000 IPID 500b000000000 Nov 2 00:47:14 mserver22 kernel: Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no Nov 2 00:47:14 mserver22 kernel: mce: [Hardware Error]: PROCESSOR 2:800f11 TIME 1667364397 SOCKET 0 APIC a microcode 8001138 mserver22-diagnostics-20221103-0004.zip Edited November 3, 20223 yr by schmitty9878
November 4, 20223 yr Author It appears to be a semi-standard Ryzen mce that is completely benign and nothing to worry about
November 4, 20223 yr Is there a way to prevent unraid from rebooting. Or is the reboot a separate issue. Sometimes reboots multiple times a day and always runs a parity check and shows that mce error
November 4, 20223 yr I ran the extended test, which took about a week to finish, and would like to review the log. If I click on the View Results button a new tab opens up and the log starts to load, but then stops after a short while. I tried both Firefox and Safari and got the same issue. Is there a log file I can download via ssh? Thanks, Ben
November 6, 20223 yr The "Fix Common Problems" plugin warns about updating every individual docker container: > Docker Application prowlarr has an update available for it How can I disable this permanently for *all* docker containers?
November 6, 20223 yr I'm yet another person who is dealing with the '/var/log is getting full (currently 100 % used)' error. Since I've replaced a small drive with a larger one the machine has been up less than 48 hours. Any advice as to the root cause, what I can do to fix it, & what I can do to prevent it from happening again? Thanks for your experienced assistance. closetmonster-diagnostics-20221106-1805.zip
November 8, 20223 yr Machine Check Events detected on your server Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the Unraid forums. The output of mcelog (if installed) has been logged More Information The NerdPack plugin is dead. Is there another option?
November 9, 20223 yr Hi! I get the following error: Multiple NICs on the same IPv4 network eth1 and eth2 both have IP addresses on the 192.168.11.0 network. This is rarely a valid configuration. I don't have eth2. Can someone help me getting rid of this problem? Thx tower-diagnostics-20221109-2233.zip
November 10, 20223 yr Hello, I updated to 6.11.3 last night and this morning I have "Invalid folder Backups contained within /mnt" and "Rootfs file is getting full (currently 83 % used)" error messages. haven't touched anything on that server recently exept updating to 6.11.2 a couple days ago. any idea? nostromo-diagnostics-20221110-0716.zip
November 12, 20223 yr Minor issue, but apparently I hit ignore on this warning a long while ago but the "MONITOR WARNING / ERROR" button doesn't work. Clicking on it does nothing. It's been like this for maybe a year, just never bothered looking into fixing it yet.
November 12, 20223 yr On 11/9/2022 at 9:25 AM, maxcompg said: Machine Check Events detected on your server Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the Unraid forums. The output of mcelog (if installed) has been logged More Information The NerdPack plugin is dead. Is there another option? There is a a new nerdtools plugin you can try out, similar functionality with an active maintainer - just be on latest OS to install
November 18, 20223 yr Uptime 1d5h... could be potentially being spammed with error messages!? Am i? tower-diagnostics-20221118-1144.zip
November 18, 20223 yr On 11/9/2022 at 2:37 PM, kenig said: Hi! I get the following error: Multiple NICs on the same IPv4 network eth1 and eth2 both have IP addresses on the 192.168.11.0 network. This is rarely a valid configuration. I don't have eth2. Can someone help me getting rid of this problem? Thx Edit the config/network.cfg file on your flash drive and make the deletions/changes noted below. Then reboot and you should be good. # Generated settings: IFNAME[0]="br0" DHCP_KEEPRESOLV="yes" DNS_SERVER1="8.8.8.8" DNS_SERVER2="8.8.4.4" DHCP6_KEEPRESOLV="no" BRNAME[0]="br0" BRNICS[0]="eth0" BRSTP[0]="no" BRFD[0]="0" DESCRIPTION[0]="1GB " PROTOCOL[0]="ipv4" USE_DHCP[0]="yes" USE_DHCP6[0]="yes" IFNAME[1]="br1" BRNAME[1]="br1" BRNICS[1]="eth1" BRSTP[1]="no" BRFD[1]="0" DESCRIPTION[1]="10GB Ethernet" PROTOCOL[1]="ipv4" USE_DHCP[1]="no" IPADDR[1]="192.168.11.10" NETMASK[1]="255.255.255.0" IFNAME[2]="eth2" <<< delete this line PROTOCOL[2]="ipv4" <<< delete this line USE_DHCP[2]="no" <<< delete this line IPADDR[2]="192.168.11.10" <<< delete this line NETMASK[2]="255.255.255.0" <<< delete this line SYSNICS="3" <<< change this from "3" to "2"
November 18, 20223 yr Author On 11/11/2022 at 11:14 PM, s449 said: Minor issue, but apparently I hit ignore on this warning a long while ago but the "MONITOR WARNING / ERROR" button doesn't work. Clicking on it does nothing. It's been like this for maybe a year, just never bothered looking into fixing it yet. fixed
November 18, 20223 yr 9 hours ago, Dirk Hill said: Uptime 1d5h... could be potentially being spammed with error messages!? Am i? I would say yes Looks like your cache disk is full Nov 18 09:11:41 Tower shfs: cache disk full ### [PREVIOUS LINE REPEATED 13658 TIMES] ###
November 19, 20223 yr Hi Guys, Been meaning to post this for a while. I can't figure out where it's getting this share from? I dont recall even ever creating a share called root. Reserved user share boot You have a share named boot. Since 6.9.0, this is now a reserved name and cannot be used as a share. You will need to rename this share at the command prompt for the system to work properly. See HERE More Information diag logs attached thanks beast-diagnostics-20221118-1516.zip
November 19, 20223 yr @Squid 1.) This is the third time, that one of my customers disabled syslog mirror to USB, because your plugin says its a bad setting. And even one customer, where I set the notification to "ignore", he disabled it, because "there was an error in the list". Is this check really needed? 2.) I like to see a new check which reports syslog entries with the word "Tainted". Those are critical kernel errors, which happen if the RAM or Storage has problems.
November 19, 20223 yr Author 1 hour ago, mgutt said: 1.) This is the third time, that one of my customers disabled syslog mirror to USB, because your plugin says its a bad setting. And even one customer, where I set the notification to "ignore", he disabled it, because "there was an error in the list". Is this check really needed? There's nothing wrong with enabling the syslog server mirror to flash. The message warning that appears is Quote The syslog is currently mirrored to the flashdrive. This option should only be used for troubleshooting, and extended use of this option may fill up your flash drive, increase the number of writes to it etc. It should be disabled if you are not actively troubleshooting an issue with your server. Which is 100% correct 1 hour ago, mgutt said: I like to see a new check which reports syslog entries with the word "Tainted". Those are critical kernel errors, which happen if the RAM or Storage has problems Everything in Unraid, especially once you get to VMs is "tainted" They aren't errors per se, but rather a flag / note to the kernel maintainers that the particular module / executable etc isn't the "stock" module that comes with the base kernel but has been modified. The maintainers will see this if you are ever submitting to them a bug report etc and then choose whether or not to help you because the coding has been modified. Quote A tainted kernel is one that is in an unsupported state because it cannot be guaranteed to function correctly. Most kernel developers will ignore bug reports involving tainted kernels, and community members may ask that you correct the tainting condition before they can proceed with diagnosing problems related to the kernel. In addition, some debugging functionality and API calls may be disabled when the kernel is tainted. In other words, it is not an error at all in the Unraid world and is expected.
November 19, 20223 yr Author 12 hours ago, smartkid808 said: I can't figure out where it's getting this share from? I dont recall even ever creating a share called root. Either you're running a script which is creating a share named boot (/mnt/user/boot) or a path mapping on one of your docker containers has a path mapping of /mnt/user/boot Whenever that script runs or the container starts it will recreate it
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.