I went to log into Deluge via unraid but I have no dockers or plugins it says. But I went to my roku and fired up PleX and everything works without issues. I am now on 6.1.9 which if i understand correct came out three days ago and it automatically updated for me if so.

 

Her is a screenshot of the log http://i.imgur.com/wniLsRj.png

 

A parity check was done this morning and came back with zero errors. Don't know if that matters or not.

 

I have little knowledge of linux as I am working on teaching myself.

 

If there is anything else needed just let me know and I'll get it for you.

 

Thank you

Tools - Diagnostics. Post complete diagnostics zip. Please read the v6 help sticky linked in my sig.

Tools - Diagnostics. Post complete diagnostics zip. Please read the v6 help sticky linked in my sig.

Attached

drewnas-diagnostics-20160516-1341.zip

unRAID is having a problem reading your flash drive. Put it in your PC and let it checkdisk.

unRAID is having a problem reading your flash drive. Put it in your PC and let it checkdisk.

that fixed it. thank you. Is there something i should be doing to back up my flash drive in case of a failure?

unRAID is having a problem reading your flash drive. Put it in your PC and let it checkdisk.

that fixed it. thank you. Is there something i should be doing to back up my flash drive in case of a failure?

There are 2 main things you need to be aware of when using a flash backup.

 

Most importantly, never restore a backup that doesn't have your current disk assignments. There has been more than one case of users starting up with an old backup and unRAID thinking their old parity disk, which they had repurposed as a data disk, is still parity and it began to overwrite their data on that disk with parity.

 

The other thing is you should never backup your flash with the array started. You can shutdown and plug it into another computer to back it up, or you can stop the array and back it up over the network then restart the array. Your flash share is still accessible on the network even with the array stopped. If you backup your flash with the array started, then if you use that backup unRAID will think that you didn't stop the array the next time it boots and will start a correcting parity check due to an unclean shutdown.

unRAID is having a problem reading your flash drive. Put it in your PC and let it checkdisk.

that fixed it. thank you. Is there something i should be doing to back up my flash drive in case of a failure?

There are 2 main things you need to be aware of when using a flash backup.

 

Most importantly, never restore a backup that doesn't have your current disk assignments. There has been more than one case of users starting up with an old backup and unRAID thinking their old parity disk, which they had repurposed as a data disk, is still parity and it began to overwrite their data on that disk with parity.

 

The other thing is you should never backup your flash with the array started. You can shutdown and plug it into another computer to back it up, or you can stop the array and back it up over the network then restart the array. Your flash share is still accessible on the network even with the array stopped. If you backup your flash with the array started, then if you use that backup unRAID will think that you didn't stop the array the next time it boots and will start a correcting parity check due to an unclean shutdown.

okay so your first point is saying that if i add another disk to make it 1 cache and 3data then my 1cache and 2data is worthless and i should get rid of them?