purko Posted January 23, 2010 Author Share Posted January 23, 2010 When i try to download the package, it says: Page Not Found Anyone have a working link for it? Ooops! Sorry. Looks my web-hosting subscription ran out. I'll renew it on monday. Link to comment
skyfox77 Posted January 23, 2010 Share Posted January 23, 2010 When i try to download the package, it says: Page Not Found Anyone have a working link for it? Ooops! Sorry. Looks my web-hosting subscription ran out. I'll renew it on monday. Oh, bummer, well, could you please upload it elsewhere until then? Link to comment
jupilerman Posted January 23, 2010 Share Posted January 23, 2010 When i try to download the package, it says: Page Not Found Anyone have a working link for it? Ooops! Sorry. Looks my web-hosting subscription ran out. I'll renew it on monday. Oh, bummer, well, could you please upload it elsewhere until then? http://rapidshare.de/files/49044338/untorrent-2.8.5.full-i486-1pur.tgz.html Link to comment
tyrindor Posted January 26, 2010 Share Posted January 26, 2010 Is there a guide somewhere on how to install this? I put the folders in my root drive but the webui still doesn't show. Link to comment
purko Posted January 26, 2010 Author Share Posted January 26, 2010 Is there a guide somewhere on how to install this? Yes, the guide is the first post in this thread. Install the package, and you're done:installpkg /path-to-where-you-put-the-package/untorrent*.tgz I put the folders in my root drive but the webui still doesn't show. Don't put any folders anywhere. Don't uncompress anything. Just use the 'installpkg' command. Link to comment
tyrindor Posted January 26, 2010 Share Posted January 26, 2010 Is there a guide somewhere on how to install this? Yes, the guide is the first post in this thread. Install the package, and you're done:installpkg /path-to-where-you-put-the-package/untorrent*.tgz I put the folders in my root drive but the webui still doesn't show. Don't put any folders anywhere. Don't uncompress anything. Just use the 'installpkg' command. I guess i'm just stupid cause I still cant figure this out. I put untorrent-2.8.5.full-i486-1pur.tgz on my unraid flash drive then telnet to my unraid server and typed: installpkg untorrent-2.8.5.full-i486-1pur.tgz installpkg /root/untorrent-2.8.5.full-i486-1pur.tgz installpkg untorrent*.tgz installpkg /root/untorrent*.tgz I've also tried putting it on disk drives and did: installpkg /disk1/untorrent-2.8.5.full-i486-1pur.tgz installpkg /disk1/untorrent*.tgz Nothing works? File not found. I've been using unraid for like 3 days, I just don't get this stuff. Link to comment
Joe L. Posted January 26, 2010 Share Posted January 26, 2010 The flash drive is mounted at /boot Therefore, either type cd /boot installpkg untorrent-2.8.5.full-i486-1pur.tgz or installpkg /boot/untorrent-2.8.5.full-i486-1pur.tgz The disks are mounted at /mnt, therefore disk1 is /mnt/disk1 The installpkg command would then be installpkg /mnt/disk1/untorrent-2.8.5.full-i486-1pur.tgz Link to comment
purko Posted January 26, 2010 Author Share Posted January 26, 2010 Is there a guide somewhere on how to install this? Yes, the guide is the first post in this thread. Install the package, and you're done:installpkg /path-to-where-you-put-the-package/untorrent*.tgz I put the folders in my root drive but the webui still doesn't show. Don't put any folders anywhere. Don't uncompress anything. Just use the 'installpkg' command. I put untorrent-2.8.5.full-i486-1pur.tgz on my unraid flash drive then telnet to my unraid server and typed: installpkg untorrent-2.8.5.full-i486-1pur.tgz installpkg /root/untorrent-2.8.5.full-i486-1pur.tgz installpkg untorrent*.tgz installpkg /root/untorrent*.tgz Your flash drive is mounted in the /boot/ directory of your root file system. So if the package is in the root folder of the flash key, then the install command would be: installpkg /boot/untorrent*.tgz I've also tried putting it on disk drives and did: installpkg /disk1/untorrent-2.8.5.full-i486-1pur.tgz installpkg /disk1/untorrent*.tgz Your disk1 is mounted in the /mnt/disk1/ directory of your root file system. So if the package is in the root folder of disk1, then the install command would be: installpkg /mnt/disk1/untorrent*.tgz Link to comment
purko Posted January 26, 2010 Author Share Posted January 26, 2010 Ooops! I see that Joe beat me to that. By 10 seconds! Link to comment
tyrindor Posted January 26, 2010 Share Posted January 26, 2010 Thanks again you two... you both have helped me a ton over the past few days. Maybe someday I won't be such a noob with all this. I'm good with hardware and Windows, but clueless with Linux and unRAID. Link to comment
hellbringer Posted January 27, 2010 Share Posted January 27, 2010 Great work m8! I have been running ruTorrent for quite some time now, and it works great, but installing it and getting it to run was a b*tch to say the least... (especially since I don't have real Linux experience) I think i will replace my custom installation (which is basically a go script installing all the required packages and running rtorrent with screen at every reboot ) with this much more elegant package. Link to comment
Hogwind Posted January 28, 2010 Share Posted January 28, 2010 Let me know if you are interested in any of the plugins listed there, and I'll make tem into unRAID packages. It would be great if you could make unRAID packages of, PluginDataDir, Plugin_GetDir and PluginChoose. Really great work you've done with this UnTorrent package. Link to comment
schark Posted January 30, 2010 Share Posted January 30, 2010 I have got one question. I installed the rutorrent package (including all plugins => first package to download) a while ago. Then I could enter the web frontend using //tower:8089. That was about a week ago. Yesterday I tried to enter //tower:8089 but with no luck. => Do I have to install the package everytime the server boots? I also tried to put this command line in my go script, but with no success after re-boot. until `cat /proc/mdcmd | grep -q -a "STARTED"` ; do sleep .5 ; done Shall I put the installcommand in the go script instead? Hope someone can enlighten me.... Link to comment
NAS Posted January 30, 2010 Share Posted January 30, 2010 At the end of you go script add the UNTIL command line you posted After that on a new line add the intallpkg command. This will reinstall the package after every boot. Link to comment
purko Posted January 30, 2010 Author Share Posted January 30, 2010 => Do I have to install the package everytime the server boots? Yes. That applies for all packages for unRAID. Use the 'go' script for that. Link to comment
Joe L. Posted January 30, 2010 Share Posted January 30, 2010 Tom has said at least once in the past that /proc/mdcmd is NOT thread safe. Your "sleep" command might interrupt a part of the start-up process. I ran into this once when I put a new disk into the server and it was clearing it. I had a 5 second polling loop invoking mdcmd watchng the array status. It prevented the clear from completing... (It kept re-starting the clear process, the server never came online) You are far better off using some other semaphore indicating that unRAID is on-line. Just in case a similar issue still exists. When unRAID 5.0 is released, we should have a true "after array starts" event to use to start processes like these. I'd use the presence of the disk mount-point as a guide. until test -d /mnt/disk1; do sleep 10; done Also, historically the sleep command in shell did not take fractions of a second arguments. The sleep in unRAID apparently can, but there is no reason in this case to make your script non-portable using 0.5. If anything, you can increase the test interval in the loop as I did in my example. If the array is just starting, give it some time. Link to comment
purko Posted January 31, 2010 Author Share Posted January 31, 2010 Two good points. Thanks. Link to comment
schark Posted January 31, 2010 Share Posted January 31, 2010 Hello, okay now I put the installation command in my go script and that works like a charme.... For testing purpose I stored a torrent file on my disk 2 in a directory. I opened it from a directory of my unraid server. But the torrent always stays in status paused. I can stop it. After I press "start" it gets automatically in status paused again. Tried also different torrent files from different trackers - but I was not successfull..... Is there something I have to think about additionally? Link to comment
purko Posted January 31, 2010 Author Share Posted January 31, 2010 Is there something I have to think about additionally? Normally, No. Is your disk array started? Do you have disk1 in your array? Is there any free space on it? What torrent directories do you have defined in your .rtorrent.rc file? (It is located in the /custom/rtorrent/ directory on your flash key) There should be a file called untorrent.log in the same directory. Can you post it here? What happens if you just drop a torrent file in your 'auto' directory? Link to comment
purko Posted January 31, 2010 Author Share Posted January 31, 2010 When i try to download the package, it says: Page Not Found Anyone have a working link for it? Links updated. (Make sure you always check the MD5 checksums of your downloads) Link to comment
schark Posted February 1, 2010 Share Posted February 1, 2010 Is there something I have to think about additionally? Normally, No. Is your disk array started? Do you have disk1 in your array? Is there any free space on it? What torrent directories do you have defined in your .rtorrent.rc file? (It is located in the /custom/rtorrent/ directory on your flash key) There should be a file called untorrent.log in the same directory. Can you post it here? What happens if you just drop a torrent file in your 'auto' directory? Yes, the array is on-line. I have set the path to disc 2 of my array as disc one has only 250 GB left. (On Disc 2 there is more than 1 TB free). I will post the directory tree tonight. One question in advance: Do I need to create the folders on my own or does rtorrent do that automatically? Link to comment
prostuff1 Posted February 1, 2010 Share Posted February 1, 2010 Yes, the array is on-line. I have set the path to disc 2 of my array as disc one has only 250 GB left. (On Disc 2 there is more than 1 TB free). I will post the directory tree tonight. One question in advance: Do I need to create the folders on my own or does rtorrent do that automatically? Create them on your own. Link to comment
schark Posted February 1, 2010 Share Posted February 1, 2010 Okay, folders created. I changed the path in the .rtorrent.rc file to /mnt/disk2/torrents/ and then subfolders downloading downloading/rtorrent.session auto complete But the untorrent log-file tells me (exactly as the web-gui) that rtorrent is not running. boot/custom/rtorrent/ and left it unchanged. Found existing php.ini in /boot/custom/php/ and left it unchanged. Found existing mod_php.conf in /boot/custom/php/ and left it unchanged. Found existing lighttpd.conf in /boot/custom/lighttpd/ and left it unchanged. Found existing lighttpd.conf.include in /boot/custom/lighttpd/ and left it unchanged. Found existing rc.local_shutdown in /boot/config/ and left it unchanged. untorrent services: rtorrent ---- NOT started! lighttpd 3985 root 4u IPv4 9022 TCP *:89 (LISTEN) lighttpd 3985 root 5u IPv4 9023 TCP *:8089 (LISTEN) Mon Feb 1 04:33:30 GMT+8 2010 ##### Finished the untorrent 2.8.5 installation... ##### But I do not know how to fix that now....... I appreciate any help in this matter....it drives me crazy.... Link to comment
purko Posted February 1, 2010 Author Share Posted February 1, 2010 Just type rtorrent and it will tell you why it refuses to start. Link to comment
langrock Posted February 8, 2010 Share Posted February 8, 2010 A very slick package. Thanks for putting in so much effort. I have a (silly) question. I am using a directory on my cache disk for everything rtorrent. It appears that the cache disk won't spin down despite there not being any active torrents; no torrent files whatsoever. When checking with lsof /mnt/cache, there's no output, which I interpret as there not being any open files that would keep unRAID from spinning down the disk. The same happened to me when I was using bubbaRAID 4.4.2. Any ideas a) why this would be the case, b) how to determine what keeps the disk from spinning down, and c) whether this problem can be "fixed"? Thanks, Carsten Link to comment
Recommended Posts