I had versjon 6.1.9 and made some VM's to test UNRAID.

 

I just formated my USB flash and installed versjon 6.2 beta 21.

I made the disk array, enable VMs with PCIe ACS Override and rebooted my server/computer. The VM tab does not show. How can i make VMs?

 

Please help

Thanks

In your log are you seeing any errors like "failed to mount". Think there is an issue with it mounting an image that VM's need.

 

When i tried the beta my VM's really were not happy and failed to start.

I dont have any errors in my log

 

This is all info i have in the log:

 

May 28 10:09:17 Tower root: realtime =none extsz=4096 blocks=0, rtextents=0
May 28 10:09:17 Tower emhttp: shcmd (70): mkdir -p /mnt/disk3
May 28 10:09:17 Tower emhttp: shcmd (71): set -o pipefail ; mount -t xfs -o noatime,nodiratime /dev/md3 /mnt/disk3 |& logger
May 28 10:09:17 Tower kernel: XFS (md3): Mounting V5 Filesystem
May 28 10:09:17 Tower kernel: XFS (md3): Ending clean mount
May 28 10:09:17 Tower emhttp: shcmd (72): xfs_growfs /mnt/disk3 |& logger
May 28 10:09:17 Tower root: meta-data=/dev/md3 isize=512 agcount=4, agsize=7814676 blks
May 28 10:09:17 Tower root: = sectsz=512 attr=2, projid32bit=1
May 28 10:09:17 Tower root: = crc=1 finobt=1 spinodes=0
May 28 10:09:17 Tower root: data = bsize=4096 blocks=31258702, imaxpct=25
May 28 10:09:17 Tower root: = sunit=0 swidth=0 blks
May 28 10:09:17 Tower root: naming =version 2 bsize=4096 ascii-ci=0 ftype=1
May 28 10:09:17 Tower root: log =internal bsize=4096 blocks=15263, version=2
May 28 10:09:17 Tower root: = sectsz=512 sunit=0 blks, lazy-count=1
May 28 10:09:17 Tower root: realtime =none extsz=4096 blocks=0, rtextents=0
May 28 10:09:17 Tower emhttp: shcmd (73): sync
May 28 10:09:19 Tower emhttp: shcmd (74): mkdir /mnt/user
May 28 10:09:19 Tower emhttp: shcmd (75): /usr/local/sbin/shfs /mnt/user -disks 14 -o noatime,big_writes,allow_other -o remember=0 |& logger
May 28 10:09:19 Tower emhttp: shcmd (76): rm -f /boot/config/plugins/dynamix/mover.cron
May 28 10:09:19 Tower emhttp: shcmd (77): /usr/local/sbin/update_cron &> /dev/null
May 28 10:09:19 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:19 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:19 Tower emhttp: nothing to sync
May 28 10:09:19 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:19 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:27 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:27 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:28 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:28 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:29 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:29 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:32 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:09:32 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:10:09 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:10:09 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:10:09 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found
May 28 10:10:09 Tower shfs/user: shfs_mkdir: assign_disk: system (123) No medium found

 

I just downloaded 6.2 beta 20, going to give it a try.

Syslog snippets are seldom sufficient.

 

You should always go to Tools - Diagnostics and attach the complete diagnostics zip when you start a support thread.

Sorry, I'm noob 

 

I tryed 6.2 beta20, stil no VM tab. This time i attached the diagnostics zip

 

Thanks for helping 

tower-diagnostics-20160528-1036.zip

Your system share is set to "use cache only" and you don't have a cache drive.

 

Adding this test to Fix Common Problems

 

EDIT:

 

Did some testing, and the problem is that however that share got it's settings to be cache only, once its set to it, dynamix actually won't let you reset it to not use the cache drive because it doesn't display the option (because there's no cache drive).  But it maintains the setting in the cfg file.  You're going to have to delete from the flash drive config/shares/system.cfg to fix this.

 

Filing a bug report

Your system share is set to "use cache only" and you don't have a cache drive.

 

I can't find out how to change that option. I dont even find it.

What do i do? Thanks

Did some testing, and the problem is that however that share got it's settings to be cache only, once its set to it, dynamix actually won't let you reset it to not use the cache drive because it doesn't display the option (because there's no cache drive).  But it maintains the setting in the cfg file.  You're going to have to delete from the flash drive config/shares/system.cfg to fix this.

 

Thank you so much! It works 

I hope you realize however that the VM performance is going to suck without a cache drive

I hope you realize however that the VM performance is going to suck without a cache drive

 

I see, I'll install another SSD for cache then. I realize i was a little to quick saying it worked. Well, I have the VMs tab now. But when I hit "OS Install ISO:" or "VirtIO Drivers ISO:" I have no option. My disks or shares does not show.

I hope you realize however that the VM performance is going to suck without a cache drive

 

I see, I'll install another SSD for cache then. I realize i was a little to quick saying it worked. Well, I have the VMs tab now. But when I hit "OS Install ISO:" or "VirtIO Drivers ISO:" I have no option. My shares does not show.

Settings - VM Settings - Advanced Settings, and set a share for the default ISO locations

I hope you realize however that the VM performance is going to suck without a cache drive

 

I see, I'll install another SSD for cache then. I realize i was a little to quick saying it worked. Well, I have the VMs tab now. But when I hit "OS Install ISO:" or "VirtIO Drivers ISO:" I have no option. My shares does not show.

Settings - VM Settings - Advanced Settings, and set a share for the default ISO locations

You are right. I have changed the versjon on the USB flash so many times that i forgot to change the settings this time. Thanks for all the help!